Dongguan Genai Technology BluePods Series TWS Wireless Earphone User Manual
- June 3, 2024
- Dongguan Genai Technology
Table of Contents
Dongguan Genai Technology BluePods Series TWS Wireless Earphone
Parameter characteristics
- Wireless version: V5.3
- Operating frequency: 2.402GHz-2.480GHz
- Support Wireless protocol: A2DP, AVRCP, HSP, HFP
- Music time: about 4.5 hours (80% volume)
- Built-in battery: lithium battery -3.7V, 30mAh
- Talk time: about 3.5 hours (80% volume)
- Charging time: about 2.5 hours
- Charging voltage: DC5V-1A
- Battery cycle life: charge and discharge cycle> 300 times
Product function\features
- Wireless stereo: support to connect Wireless devices to play music
- Wireless call: support Wireless connection high-definition call
- Power indicator: support power indicator
Key function operation
- Power on: Turn on the charging box, and the headset will automatically turn on
- Shut down: put the earphone into the charging box and close the cover
- Pairing mode: the headset automatically enters the pairing mode when turned on
- Pause/Play: click left earphone or right earphone
- answer the phone: click left earphone or right earphone
- Hang up the phone: Double-click the left/right earphones once
- Incoming call rejection: long press the left earphone or the right earphone for 2 seconds
- Previous song: Three clicks on the left earphone
- Next song: Triple click on the right earphone
- Volume up: double-tap the right earphone
- Volume down: double-tap the left earphone
- Voice assistant: long press the left/right earphone for 2 seconds
Charging box indicator
- Charging box opening or closing indicator light: green light is on
- Put the earphone into or out of the charging box indicator light: the green light flashes once
- Charging indicator light for the charging box: the orange light is always on, and the orange light is off when fully charged
- Low battery reminder of the charging box: the orange light flashes when the charging box is low
Wireless connection operation
- Please keep the Wireless headset and mobile phone (or other connected devices) within 1 meter, the closer the better.
- Open the charging box, the headset will automatically turn on and enter the pairing mode.
- Turn on the user’s mobile phone (or other Wireless devices), Wireless function, and search or scan. At this time, the mobile phone will search for all nearby
- For wireless devices, click the connection corresponding Wireless model name, after successfully pairing and connecting, you can start the headset call, Listening to songs, etc.
Note: Do not close the charging case cover during the pairing process of the Wireless headset
Warnings and precautions when using the product
- Do not use abrasive cleaners to clean this product.
- Do not allow this product to heat up or close to a fire source, such as a
Cooking stove.
- Do not expose this product to direct sunlight for a long time.
- Do not dispose of this product in a fire to avoid an explosion.
- Do not attempt to disassemble this product to make any modifications, as it does not contain any maintenance components.
- Do not use this product in the rain.
- If you do not plan to use this product for a long period of time, please store it in a dry environment and charge the headset at least once a month to extend its life and avoid extreme temperatures and dust.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment
- This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Information
- The device has been evaluated to meet general RF exposure requirements.
- The device can be used in portable exposure conditions and compliance with exposure requirements.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>