sensio SE10855C0 Sigma 2 S-Bend Flexible LED Strip Installation Guide
- June 17, 2024
- Sensio
Table of Contents
sensio SE10855C0 Sigma 2 S-Bend Flexible LED Strip
Product Information
- Specifications
- Product Name: Sigma 2 – S-Bend Flexible LED Strip
- Model: SE10855C0/N0/W0
Product Usage Instructions
- Facility
- Ensure the power source is turned off before installation.
- Peel off the adhesive backing of the LED strip.
- Apply the LED strip to the desired surface, making sure it is clean and dry.
- Secure the strip in place by pressing firmly along its length.
- Connect the power source to the strip according to the polarity markings.
- Use
- Once installed, turn on the power source to illuminate the LED strip. Adjust brightness or colour settings if applicable.
- Maintenance
- Regularly check for any dust or debris on the LED strip and clean gently with a dry cloth if necessary. Avoid using harsh chemicals.
- Safety Precautions
- Avoid bending the LED strip excessively to prevent damage to the lights.
- Do not submerge the LED strip in water or expose it to extreme temperatures.
- If any part of the LED strip appears damaged, discontinue use immediately.
- FAQs
- Q: What should I do if the LED strip does not light up after installation?
- A: Check the polarity of the connections and ensure they match the markings on both the strip and the power source.
- Q: Can I cut the LED strip to fit a specific length?
- A: Yes, you can usually cut the LED strip at designated cut points. Refer to the product manual for instructions on cutting.
Included
USING INSTRUCTION
Accessories
DIMENSION
- Product Wattage 4.8W/M
- IP Rating Classement IP IP20
- Input Voltage 24V
- Colour temperature 3000K 4000K 5000K
WARNING: Read these instructions carefully before proceeding. Keep these instructions in a safe place for future reference.
IMPORTANT: We recommend that you consult a qualified electrician. All electrical Installation must be carried out per current IEE wiring regulations (BS7671).
SAFETY WARNINGS
- These products must not be modified in any way or installed in any other way than dictated in these instructions.
- Any modifications may render the product unsafe and will void the product’s warranty.
- This product is for indoor use only.
- Keep out of moisture and use only in dry rooms.
WASTE ELECTRICAL & ELECTRONIC EQUIPMENT (WEEE)
- The symbol on the product and/or accompanying document, the crossed-out wheelie bin, indicates that this product may not be treated as household waste.
- Instead, it should be handed over to the applicable collection point for the recycling of electrical and electronic waste.
MAINTENANCE
- Ensure that the power is disconnected before cleaning.
- Wipe over with a cloth periodically.
- Do not use harsh chemical solvents, this may dis-colour or damage the finish.
NOTE
- Please ensure you use an appropriate driver with an adequate max wattage.
- Do not overload the LED Driver.
CONTACT
- Sensio Lighting Ltd, Speedwell Road, Castleford,
- West Yorkshire, United Kingdom, WF10 5PY
- EU Representative: Sensio Lighting Dublin Ltd, The Black Church, St. Mary’s Place, Dublin, Ireland, D07 P4AX
- Tel: +44 (0) 1977 522 020
- www.sensio.co.uk.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>