SHARPER IMAGE 1015473 Wireless Valet Desk Organizer with Charging Pad User Manual

WIRELESS VALET
DESK ORGANIZER WITH CHARGING PAD

THANK YOU FOR PURCHASING YOUR WIRELESS VALET.
Featuring Qi technology for fast charging and modular storage, the Wireless Valet helps you organize accessories and personal items while offering the convenience of cord-free charging on the go. Please read all instructions and warnings prior to use. Keep this manual as it contains important information for future reference.
CONTENTS
a. Wireless Valet organizer
b. Removable card holder
c. Magnetic lid with 10W Qi charging pad
d. Modular storage trays (x2)
e. USB-C to USB-A power cable

WIRELESS CHARGING
Plug the USB-C power cable (included) into the input port in the Wireless Valet lid. Plug the other end of the cable into a USB-A power adapter (not included) and then plug the adapter into a wall outlet. Place your Qi-enabled device on the lid, aligned with the Sharper Image logo. The LED will turn on when charging.
MODULAR STORAGE
Fill the cardholder with small items, business cards, and more. Snap the cardholder into the underside of the Wireless Valet lid. Position the modular storage trays inside the storage compartment as desired or remove for the easy organization on any desk or table. Store the USB-C power cable (included) and your power adapter (not included) in the Wireless Valet for use on the go.

TECHNICAL SPECIFICATIONS

• Item Number: 1015473
• Wireless Output: 10W
• USB-C Input: 5V/2A, 9V/2A, 12V/1.5A
• Charger Indicator: White LED Indicator
• Dimensions: 7.91 in. x 6.20 in. x 2.05 in. (200 mm x 157 mm x 52 mm)
• Weight: 512g (1.13lb)
  The Wireless Valet is designed to provide optimal charging at up to 10W.
  Certified charging for Qi-enabled devices, including but not limited to: iPhone series 8, X, 11, SE (2nd and 3rd generations), 12, and 13

SAFETY WARNINGS

PLEASE READ BEFORE USE

• Not a children’s item. Keep out of reach of children.
• Do not use this item near people with pacemakers or similar medical devices.
• Do not expose to moisture or extreme temperatures.
• Only use the provided charging cable.
• Use this item only for its intended purpose.
• Do not expose to extreme temperatures or moisture.
• For indoor use only.
• Do not expose to direct sunlight for extended periods of time.
• Thoroughly inspect products before every use. If the product appears worn, frayed/splintered, cracked, or broken in any manner, discontinue use and discard it immediately. This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:
  1）This device may not cause interference.
  2）This device must accept any interference, including interference that may cause undesired operation of the device.

FCC STATEMENT

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
To maintain compliance with the RF exposure guidelines, place the product at least 20cm from nearby persons.  FCC ID: 2AEVM1015473

SHARPER IMAGE ®
NAME AND LOGOS (INCLUDING
THE 77 LOGO AND TOMORROW’S TOMORROW) ARE TRADEMARKS OR REGISTERED TRADEMARKS?
DISTRIBUTED BY AND © 2022 MERCHSOURCE, LLC.
IRVINE, CA 92618. ALL RIGHTS RESERVED.
FOR CUSTOMER SUPPORT, PLEASE CALL 1-800-374-2744. Printed in China.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>