ReDMOND SkyKettle RK-M170S-E Electric Kettle User Manual

ReDMOND SkyKettle RK-M170S-E Electric Kettle

Electric Kettle SkyKettle RK-M170S-E
The Electric Kettle SkyKettle RK-M170S-E is a kitchen appliance designed for heating and boiling water. The kettle has a capacity of 1.7 liters and comes with a detachable limescale filter. The kettle is equipped with a touchpad, a water-level indicator, and a heating element that automatically switches off when the water reaches boiling point.

IMPORTANT SAFEGUARDS

The following safety measures should be taken while operating the appliance:

• The appliance should be kept out of reach of children aged less than 8 years.
• Cleaning and user maintenance should not be made by children without supervision.
• Modifications or adjustments to the product are notallowed.
• All service and repair works should be carried out by an authorized service centre.
• Do not use the appliance in case any breakdown has been noticed.

Parts of the appliance
The Electric Kettle SkyKettle RK-M170S-E consists of the following parts:

1. Touchpad
2. Housing
3. Spout with detachable limescale filter
4. Lid
5. Button to open lid
6. Handle
7. Water-level indicator
8. Electric power cable
9. Base with recess for cable

Prior to the first use
Before using the Electric Kettle SkyKettle RK-M170S-E for the first time, follow these steps:

1. Take the appliance and its detachable parts out of the package.
2. Remove all wrapping materials and stickers except for the serial number identification sticker.
3. Wipe the base of the appliance with a damp cloth, then let it dry.
4. Boil water in the kettle a few times before the first use to get foreign smell out and disinfect the appliance.

Operation

To use the Electric Kettle SkyKettle RK-M170S-E, follow these steps:

1. Place the kettle and base on a hard, even, dry flat surface away from other objects or surfaces which may be damaged by steam.
2. Fill the kettle with water up to the desired level.
3. Press and wait about 3 seconds: the indicator lights up and the water starts to heat up.
4. The heating element switches off automatically when the water reaches boiling point.
5. The temperature can be set or changed in the same way during or after boiling.

Carefully read all instructions before operating the appliance and save them for future reference. By carefully following these instructions you can considerably prolong the service life of your appliance.
The safety measures and instructions contained in this manual do not cover all possible situations that may arise during the operation of the appliance. When operating the device the user should be guided by common sense, be cautious and attentive.

IMPORTANT SAFEGUARDS

• The manufacturer is not responsible for injuries caused by failure to comply with the safety require- ments and operation rules of the appliance.

• This appliance is intended to be used for nonin- dustrial use in household and similar spheres of application. Industrial application or any other misuse will be regarded as violation of proper service conditions. Should this happen, manufac- turer is not responsible for possible consequenc- es.

• Before plugging in the appliance ensure that the circuit voltage matches operating voltage of the appliance (see technical specifications or manu- facturer’s plate on the appliance).

• Use an extension cord designed for the power con- sumption of the appliance as the parameter mis- match may result in a short circuit or fire outbreak.

• Use only earthed electric sockets as this is an ob- ligatory safety requirement. Use an earthed exten- sion cord as well.

• Unplug the appliance after use, while cleaning or moving. Remove the power cord with dry hands holding it by the plug, not cord.
  CAUTION! Appliance runs hot while operating. Do not touch the housing while the kettle is operating. Do not lean over the appliance when the lid is on to avoid scalds.

• Use the appliance for its intended purpose only. Otherwise it will be considered as misuse.

• Kettle may be used only with a specially designed base (included).

• Do not place the cord in doorframes or by heat sources. Do not twist or bend the power cord, ensure that it is not in contact with sharp objects, corners and edges of furniture. Accidental damage to the power cord may cause electric shock or breakdown not covered by the terms of warranty. Promptly contact the service centre to have the damaged power cord replaced. Do not place the appliance on soft, unstable surface.

• Do not put the kettle on temperature-sensitive surface, do not cover the appliance while it is in operation as it may result in a fault or breakdown of the appliance.

• Do not use the appliance outdoors as ingress of moisture or foreign objects inside the housing can result in damage.

• Before cleaning the appliance ensure that it is unplugged and has cooled down. Follow the in- structions while cleaning the device. DO NOT immerse the appliance in water or keep in running water!

• Do not spill liquid on the connector.

• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Chil- dren shall not play with the appliance. Keep the appliance and its cord out of reach of children aged less than 8 years. Cleaning and user maintenance shall not be made by children without supervision.

• Keep the packaging (film, foam plastic and other) out of reach of children as they may choke on them.

• No modifications or adjustments to the product are allowed. All service and repair works should be carried out by an authorized service centre. Failure to do so may result in device and property damage or injury.
  CAUTION! Do not use the appliance in case any breakdown has been noticed.

Technical characteristics

• Model; SkyKettle RK-M170S-E

• Power: 2000-2400 W

• Voltage: 220-240 V, 50/60 Hz

• Electrical safety: class I

• Volume: 1.7 L

• Composition ………………………………………………………………………….stainless steel, plastic outer

• Limescale filter: detachable

• Boils water: yes

• Heats water to set temperature without boiling: yes

• Maintains water temperature automatically; up to 12 hours
  Turns off automatica lly:

  • on boiling
  • when empty
  • when removed from base

• Heating element: enclosed plate

• Rotation on base: 360°

• Cable storage space: yes

• Control circuitry and temperature sensor; STRIX®

• Power cord length: 0.75 m

• Overall dimensions; 230 × 228 × 257 mm

• Net weight; 1.63 kg

Package contents

• Kettle: 1 pcs.
• Kettle base: 1 pcs.
• User manual: 1 pcs.
• Service booklet: 1 pcs.

In accordance with the policy of continuous improvement, the manufacturer reserves the right to make any modifications to design, packaging arrangement, or technical specifications of the product without prior notice. The specification allows an error of ±10%.

Parts of the appliance

(scheme A1, p. 3)

1. Touchpad
2. Housing
3. Spout with detachable limescale filter
4. Lid
5. Button to open lid
6. Handle
7. Water-level indicator
8. Electric power cable
9. Base with recess for cable

Control panel

(scheme A2, p. 4)

1. 100°C — boils the water
2.  — boils (heats) the water to set temperature; stops and switches to standby
3. — heats the water without boiling
4. Water temperature buttons

PRIOR TO THE FIRST USE

Carefully take the appliance and its detachable parts out of the package.

Warning

• Remove all wrapping materials and stickers except for the serial number identification sticker!
• After the appliance transportation or storage at low temperature keep it at room temperature for at least two hours before plugging in.

Wipe the base of the appliance with a damp cloth, then let it dry. You may notice foreign smell when using the appliance for the first time. This does not mean its malfunction.

CAUTION
You are advised to boil water in the kettle a few times before the first use to get foreign smell out and disinfect the appliance

OPERATION

(scheme A3, p. 5)
Before use
Place the kettle and base on a hard, even, dry flat surface away from other objects or surfaces which may be damaged by steam.
NOTE: the appliance is to be used only for heating and boiling water.
After connecting the kettle to the mains power supply the indicators on the base will light up for 1 second. A short signal is emitted and the appliance switches to standby mode (no indicator light).

Water-temperature maintenance mode
This mode switches on automatically after heating and allows a set water temperature to be maintained (40, 55, 70, 85 or 95°С) for 12 hours. If the water falls below the set temperature, the heating element switches on automatically. The water is not reboiled. At the end of the process, the appliance emits 5 short signals and switches to standby.

Boiling water

1. In the standby mode, press 100°C. The indicator lights up.

2. If you want to keep the water at a set temperature after boiling, press the relevant temperature button (40, 55, 70, 85 or 95°С). The indicator lights up.
   The temperature can be set or changed in the same way during or after boiling.

3. Press and wait about 3 seconds: the indicator lights up and the water starts to heat up.

4. When the water has boiled, depending on the settings:

   • the kettle switches back into the standby mode (no indicator light);
   • the kettle switches into the temperature-maintenance mode (the and temperature indicators light up).

5. Press to interrupt the heating process or switch off the automatic temperature maintenance mode.

Heating water without boiling
This is the recommended mode for bottled artisan or filtered water. Water which has not been boiled retains its natural properties, which is particularly important when brewing premium teas.

1. In the standby mode, press . The indicator lights up.

2. Within 5 seconds, press the temperature button to set the water temperature (40, 55, 70, 85 or 95°С). The indicator lights up.
   If the temperature is not set within 5 seconds, the appliance switches to the standby mode (no indicator light). The temperature can also be changed during the heating process by pressing the relevant temperature button.

3. Press or wait 5 seconds: the indicator lights up and the water starts heating up. At the same time, the , and temperature indicators will light up.

4. When the water has been heated, the kettle goes into the temperature-maintenance mode (the and temperature indicators light up).

Boil Dry Protection
The kettle switches off automatically after boiling and when it is removed from its base. If the kettle is empty or does not have enough water inside, the dry-boil protection will switch the kettle off automatically. When it has cooled down, the appliance will again be ready for use. Try to avoid activating the dry-boil protection as this can reduce the life of the appliance.

CLEANING AND MAINTENANCE

• Before cleaning, unplug the kettle and leave it to cool down.
• Do not clean with abrasives or chemical substances not recommended for items that come into contact with foodstuffs.
• Do not immerse the base, electric cable or plug in water: the electrical contacts must not come into contact with water. Before using the kettle again, ensure that the electrical contacts are completely dry.

Periodically clean the surface of the kettle and the base with a soft damp cloth. A build-up of limescale may form inside the appliance over time. Use a special kitchen limescale remover (purchased separately) and follow the usage instructions. The limescale filter can be detached for cleaning: open the lid, carefully remove the filter, immerse it in a lemon-water solution, then rinse and replace.

Transportation and Storage

Before repeated operation or storage completely dry all parts of the appliance. Store the assembled appliance in a dry, ventilated place away from heating appliances and direct sunlight. During transportation and storage, do not expose the device to mechanical stress, that may lead to damage of the device and/or violation of the package integrity. Keep the device package away from water and other liquids.

BEFORE CONTACTING SERVICE CENTRE

In case you didn’t manage to eliminate the defects, please, refer to the authorized service centre.

Environmentally friendly disposal (WEEE)
The packaging, user manual and the device itself shall be taken to the applicable collection point for the recycling of electrical and electronic equipment. Do not throw away the electronic waste to help protect the environment. Old appliances must not be disposed with other household waste but must be collected separately. Municipal disposal of recyclable wastes is free of charge. The owners of old appliances are required to bring it to a waste facility centre. With this little extra effort, you can help to ensure that valuable raw materials are recycled and pollutants are treated as appropriate. This appliance is labelled in accordance with European Directive 2012/19/EU — concerning used electrical and electronic appliances (waste electrical and electronic equipment WEEE). The guideline determines the framework for the return and recycling of used appliances as applicable throughout the EU.

Manufacturer: “Power Point Inc Limited” №1202 Hai Yun Ge (В1) Lin Hai Shan Zhuang Xiameilin Futian Shenzhen China 518049 Under license of REDMOND®
Importer (EU): SIA “SPILVA TRADING” Address: Jelgava, Meiju cels 43 – 62, LV-3007 Reg. Nr. 43603078598

www.redmond.company
www.multicooker.com
Made in China RK-M170S-E-UM-11

References

• Official Online Shop of REDMOND Multicookers in UK | REDMOND

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>