Nedis 4IN1CBW10WT | 4IN1CDW10WT CCTV Security Camera User Manual

: June 5, 2024
: nedis

4IN1CBW10WT | 4IN1CDW10WT CCTV Security Camera

CCTV Security Camera

User Manual

Preface

Thank you for purchasing the Nedis 4IN1CBW10WT | 4IN1CDW10WT.

This document is the user manual and contains all the information for correct, efficient and safe use of the product.

This user manual is addressed to the end user. Read this information carefully before installing or using the product.

Always store this information with the product for use in the future.

Product description

The Nedis 4IN1CBW10WT | 4IN1CDW10WT is a CCTV security camera.

This 4 in 1 CCTV camera is compatible with both analog and digital DVR systems. Use the controller on the cable to switch between 4 of the most common video formats to easily add the security camera to your DVR system.

Intended use

This product is exclusively intended as a security camera.

Any modification of the product may have consequences for safety, warranty and proper functioning.

Specifications

Product

|

CCTV Security Camera

---|---

Article number

|

4IN1CBW10WT

|

4IN1CDW10WT

Dimensions (l x w x h)

|

163 x 55 x 55 mm

|

93 x 93 x 66 mm

Weight

|

162 g

Waterproof

|

IP66

|

No

IR LED

|

12 pcs SMT LEDs

|

24 pcs LEDs

Image sensor

|

2.0 Megapixel, CMOS sensor

Lens

|

3.6 mm fixed lens

Minimum illumination

|

0.01 Lux (F1.2, AGC NO), 0 Lux with IR

IR range

|

20 m

Day & night

|

IR CUT

Scanning system

|

PAL

Frame rate

|

PAL: 1920 x 1080 @ 25 fps

Shutter time

|

1/25 s – 1/100.000 s

Operation temperature

|

-10 °C – +50 °C

Power supply

|

12 VDC

Power consumption

|

3 W, 5 W (IR on)

Transmission distance

|

500 m (coaxial video cable)

Main parts (image A )

A

1. Joystick

2. BNC connector (female)

3. 5.5 mm DC connector (female)

4. Camera head

5. Orientation indicator

6. Infrared LEDs

7. Lens

8. PIR sensor

9. Screw (3x)

10. Plug (3x)

Safety instructions

WARNING

Only use the product as described in this manual.
Do not use the product if a part is damaged or defective. Replace a damaged or defective device immediately.
Do not open the product.
Do not drop the product and avoid bumping.
This product may only be serviced by a qualified technician for maintenance to reduce the risk of electric shock.
Disconnect the product from the power outlet and other equipment if problems occur.
Keep the product out of reach from children.

Installation

Check the contents of the package
Check that all parts are present and that no damage is visible on the parts. If parts are missing or damaged, contact the Nedis B.V. service desk via the website: www.nedis.com.

Preparing the security camera

To connect the camera, you need a Digital Video Recorder (DVR) that is connected to a monitor.

1. Connect A 2 to a DVR with a BNC cable (not included).

2. Connect A 3 to a 12 VDC power adapter (not included).

3. Insert the power adapter into a power outlet.

Selecting video format (image B )

Set up the correct signal before mounting the camera.

1. Choose the desired input signal format to send to the DVR.

2. Tilt and hold A 1 for 3 seconds in the desired direction.

3. The security camera is now ready for use.

B

TVI

|

Transport Video Interface

|

Digital format

---|---|---

AHD

|

Analog High Definition

|

Digital format

CVI

|

Composite Video Interface

|

Digital format

CVBS

|

Video Blanking Sync.

|

Analog format

Use

C

1. Up

2. Left

3. Down

4. Right

5. Confirm (press)

If desired, change the settings before mounting the camera.

1. Press A 1 to enter the On-screen Display (OSD) menu.

2. Tilt A 1 to navigate through the menu.

3. Press A 1 to select and confirm settings.

Exposure mode

|

Auto exposure / Black light compensation

---|---

White balance

|

Auto

Day & night

|

Auto / Black / Color

Advanced function

|

Digital wide dynamic / Defog

Image adjustment

|

Sharpen / Saturability / Reference brightness

Mounting the security camera

You can mount the camera to a wall or ceiling.

1. Ensure that A 5 is at the top.

2. Draw three marks to indicate the desired location.

3. Drill the holes and place the plugs A10.

4. Fasten the camera with A 9.

5. Rotate A 4 in the desired angle.

Maintenance

Clean the product regularly with a soft, clean, dry cloth. Avoid abrasives that can damage the surface.
Do not use aggressive chemical cleaning agents such as ammonia, acid or acetone when cleaning the product.
Do not unplug the product by pulling on the cable. Always grasp the plug and pull.

Warranty

Any changes and/or modifications to the product will void the warranty. We accept no liability for damage caused by improper use of the product.

Disclaimer

Designs and specifications are subject to change without notice. All logos, brands and product names are trademarks or registered trademarks of their respective owners and are hereby recognized as such.

Disposal

|

This symbol indicates that this product should not be thrown away with other household waste throughout the EU. To prevent possible harm to the environment or human health by uncontrolled waste disposal, you are responsible for recycling it so that it can promote the sustainable reuse of raw materials. To return your used product, you can use the regular return and collection systems or contact the store where the product was purchased. They can recycle this product for the environment.

---|---