pni Safe House HS008 wireless outdoor siren User Manual
- June 5, 2024
- PNI
Table of Contents
PNI SafeHouse HS008
Wireless outdoor siren
User manual
PNI SAFEHOUSE HS008 solar outdoor infrared smart siren is created for outdoor security monitoring with an integrated PIR sensor. Totally independent powered by a solar panel and Li-Ion rechargeable battery it has 3 ways of alarming: Red light notification, audible notification, and Smartphone push notification via WiFi/Internet (if available).
PRODUCT DESCRIPTION
Solar panel charging –
High pitch alarm –
Wall panel for installation –
PIR detector –
Setting key –
Alarm light –
SETUP WORKING MODES
- Long press setting key with two beeps: enter the state of network configuration
A short press on the setting key:
- One beep: 24-hour alert mode (with sound and light alarm)
- Two beeps: 24-hour silent alert mode (flashing alarm only)
- Three beeps: intelligently judge not to alarm during the day and enter the alert state at night
- Four beeps: nuisance mode, silent alarm at night
- No sound and always on: Shut down
Warning: When the siren starts, it enters the first alarm mode of 24-hour alarm. Please change the working mode. If the system is kept triggered, a detection alarm will not be performed.
MOBILE APP CONFIGURATION
Download app:
|
---|---
https://play.google.com/store/apps/details?id=com.tuya.smart&hl=en|
https://apps.apple.com/us/app/tuyasmart/id1034649547
- Scan the QR code and download Tuya Smart app according to your phone operating system: Android or iOS
Register/Login in Tuya Smart app
WiFi pairing procedure with Tuya smart app
a) Open Tuya Smart and click Add device or + at the top right corner to add
the device.
b) Select Sensors and Motion Detector (WiFi) device
c) Insert the WiFi password for the 2.4 GHz WiFi network (your phone is
connected to) and click Next
Long Press the “setting button“ to enter pairing mode, the siren will beep twice.
- If the alarm light is flashing quickly, the siren will be connected by WiFi quick configuration mode.
- If the Alarm light is flashing slowly then the siren will be connected by hotspot mode.
Long pressing the “setting button”, the siren will beep twice, and toggle between WiFi quick connection and hotspot network configuration switch.
Warning: If the alarm is always on, the device is in a reset state. Now
please long press the “set button“ to enter pairing mode.
WiFi quick configuration
-
Select Blink Quickly on the screen and wait for the pairing procedure to continue (120S).
Hotspot configuration -
Select Blink Slowly on the screen and follow the next steps and on-screen indications:
After the procedure is complete, click “Done“ and go back to the home screen of the Tuya App.
TUYA APP OPERATION
Warning: When the battery is less than 20% the app will push the low-
voltage alarm.
When the alarm duration is over, the device goes to sleep -Mute alarm / Stop
the alarm – Alarm duration is set during equipment operation. The alarm
duration cannot be modified during device hibernation –
INSTALLATION GUIDE
General installation principle
Although the detector has powerful performance, the following improper
installation manner should be avoided as possible during the installation
process to ensure that the detector can play better and more stable detection
performance. Don’t install it beside the road Far away from high voltage.
Don’t install it in an insecure place Ensure to install it in a place with
sunlight to charge The recommended installation height is 2 meters
INSTALLATION STEPS
a) Draw a line on the installation position to make the positioning hole. Then hammer it into the expansion piper as the figure shows.
b) Screw in the screws with a cross screwdriver in the clockwise direction as the figure shows:
c) Place the siren on the wall bracket as the figure shows:
SPECIFICATIONS
- Solar panel: 5V / 0.6W polysilicon
- Alarm sound: 120 dB
- Charging time: 6 – 8 h
- Alarm output: low battery alarm, infrared alarm
- Detection angle: 110˚
- Battery parameters: 3.7V / 600 mAh Li-Po battery
- Detection distance: 9 – 12 m
- WiFi frequency: 2.4 GHz
- Transmission power: 100mW
EU Simplified Declaration of Conformity
SC ONLINESHOP SRL declares that Wireless outdoor siren PNI SafeHouse HS008
complies with the Directive EMC 2014/30/EU and RED 2014/53/UE. The full text
of the EU declaration of conformity is available at the following Internet
address: https://www.mypni.eu/products/8092/download/certifications
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>