PNi RG120 WiFi Smart Relay User Manual
- May 15, 2024
- PNI
Table of Contents
PNi RG120 WiFi Smart Relay
Product Information
Technical Specifications
- Product Name : PNI SmartHome RG120 WiFi Smart Relay
- Wireless Connection : 2.4 GHz
- Power Supply : 230V – 5V
- Compatibility : Garage door automation systems
What’s Included
- Power adapter 230V – 5V
- USB – micro USB cable
- Relay unit
- Red/black wires
- Garage door engine (automation)
- Open button
Product Usage Instructions
Compatibility Test
- Power the relay using the included power supply and USB cable.
- Connect the relay to the garage door opener using the red/black wires.
- Press the button on the relay to trigger the command for opening/closing the door.
Connection to WiFi Network and App Setup
- Connect your phone to a 2.4 GHz wireless network.
- Download and install the Tuya Smart app on your phone.
- Pair the relay with the app ensuring both are within range of the WiFi network.
- Power the relay using the included power supply and USB cable.
Relay Installation on Garage Door
Install the relay only after testing compatibility and adding it to the mobile application.
Simplified EU Declaration of Conformity
The Smart Relay PNI SmartHome RG120 complies with the RED Directive 2014/53/EU. For more information, visit: EU Declaration of Conformity
FAQ
- What should I do if my garage door does not open after connecting the relay?
- If the door does not open, check the compatibility of the relay with your garage door automation system. Refer to the automation documentation for the correct opening command type.
- Can I control multiple garage doors with one smart relay?
- While each relay can control a single door, you can add multiple relays to the Tuya Smart app to control multiple doors or gates.
Technical specifications
- Power supply : 230V AC – 5V/1A DC
- Door sensor type : magnetic with wire
- Sensor cable length : 5 meters
- Order type : NO relay (normal open not energized)
- Wireless frequency : 2.4GHz
- Transmission power : 100mW
- Wireless standard : IEEE802.11 b/g/n
- Mobile application : Tuya Smart, Smart Life
- Installation: indoor only
- Operating temperature : -26°C ~ +80°C
What you get
- Smart relay
- Wired door sensor
- USB – Micro USB cable
- 230V-5V power adapter
- Mounting accessories
- User manual
Compatibility test between the PNI RG120 relay and the motorized gate/door
- Power the relay with the included power supply and USB cable. The LED will flash alternately red/blue, then it will stabilize on blue LED.
- Use the red/black wires in the box to connect the relay to the garage door opener (meaning, the wires from the garage door opener).
- Press the button on the relay.
- Pressing the button will trigger the command, closing the relay and the NO control circuit (normally open not energized).
- A. Power adapter 230V – 5V
- B. USB – micro USB cable
- C. Relay unit
- C.1 LED
- C.2 Button
- D. Red/black wires
- E. Garage door engine (automation)
- F. Open button
If the test succeeds and the door opens, repeat and test the closing procedure, after which you can proceed to the next step.
If the gate does not open, the relay may not be compatible with the garage door automation. Check the automation documentation for the compatible opening command type.
The smart relay connection to the WiFi network and addition to the Tuya Smart mobile application
- Connect your phone to the 2.4 GHz wireless network. The PNI RG120 smart relay only supports a 2.4 GHz wireless connection. If you have 2 networks available, one 2.4 GHz and one 5 GHz, make sure you have chosen the 2.4 GHz WiFi network for connection.
- Download the Tuya Smart app from Google Play or the App Store or scan the QR codes below:
- During the pairing procedure, make sure that the phone and the relay are within range of the WiFi network (you must have at least 50% signal). Make sure that your router does not have the MAC filtering function activated.
- Start the application, log in or create an account if you are using the application for the first time.
- Power the relay with the power supply and the USB cable in the package. The LED will flash quickly red/blue. Note: If, on the other hand, the LED flashes rarely, press and hold the button on the relay until the LED flashes red/blue often.
- Click the + icon in the upper right corner of the application.
- From the list of categories on the left, select Electrical, then the Garage Door Opener (Wi-Fi) option from the list of devices on the right side of the screen.
- Check again that the LED on the relay flashes frequently.
- Enter the wireless network password (activate the GPS location on the phone if necessary) and continue.
- The pairing procedure can take several moments. Wait until it completes successfully. The application will ask you to rename the relay.
If adding the relay fails, repeat the above steps, making sure you have
entered the correct wireless network password and that the LED on the relay
flashes frequently.
The application allows you to open and close the garage door, to make alarm
notification settings in case of open/closed doors and to set a certain time
when the door will open/close automatically.
- A smart relay can open a single garage door.
- In the application, however, you can add as many relays as you want for as many doors or gates as you have.
Relay installation on the garage door
Install the relay only after you have tested the compatibility with the garage door and after you have added it in the mobile application.
- Wall
- Garage door
- Sensor cable
- Wired sensor
- Sensor magnet (fixed on the garage door)
- Sensor cable
- Relay
- Red/black wires
- Garage door opening button
- First step : Power the relay using the power adapter in the package.
- Second step : Connect the relay to the door opener (meaning to the wires leading to the garage door opener).
- Insert the red/black wire plug into the relay. Then connect the 2 wires to the garage door motor (automation) in the same connectors where the wires leading to the wall-mounted opening button are connected.
- Third step : Connect the sensor to the garage door. Connect the sensor connector to the relay. Then mount the wired sensor on the wall and the magnet on the garage door so that you get a distance between the 2 elements of 3-15 mm. Use the mounting accessories in the box (screws, nails, cables).
- Note : If it is difficult to install with screws, you can use the double-sided tape in the package as an alternative. For a secure fixing you can use both elements: screws + double-sided adhesive tape.
Simplified EU declaration of conformity
SC ONLINESHOP SRL declares that the Smart Relay PNI SmartHome RG120 is in
accordance with the RED Directive 2014/53/EU. The full text of the EU
Declaration of Conformity is available at the following website:
https://www.mypni.eu/products/6946/download/certifications
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>