PNI IP575 Video Surveillance Camera User Manual

PNI House IP575

Technical specifications

5MP 2592×1944@15fps
4MP 2560×1440@20fps
2MP 1920×1080@20fps;
Second stream: 800×448@25fps
Shutter| 1/25s ~ 1/100000s
WDR| Support D-WDR
DNR| 2D/3D-DNR
Optical zoom| 20X
Lens| 4.7-94mm
Minimum illumination LED| 0.01Lux @(F1.6,AGC ON), 0 Lux with IR
LED| 4 x IR LED, 4 x White LED, 2 x Laser LED
IR distance| Up to 150 meters
Video compression| H.265X (H.264+/H.264 compatible)
Video format| AVI
Network interface| RJ45
Network protocols| TCP/IP, UDP, DHCP, NTP, RTSP, PPPoE, DDNS, SMTP, FTP
Wireless frequency| 2.4GHz
WiFi transmission power| 100mW
Onvif| Yes, V16.12 and newer
Motion detection| Support
Face detection| Support
Human detection| Support
Waterproof| IP65
Power voltage| DC12V/2A
Operating temperature| -26°C ~ +80°C

Control from the ICSee application

Adding the camera to the application

1. Install the ICSee application by accessing Google Play or the App Store or by scanning the QR code below:
   | |
   ---|---|---
   https://play.google.com/store/apps/details?id=com.xm.csee&hl=en&gl=US&pli=1| https://apps.apple.com/us/app/icsee/id1130153523
2. Create an account in the application or log in if you already have one.
3. Activate the GPS Location function in your phone.
4. Power the camera with the power supply adapter in the package. You will immediately hear the message “System starting up. Wait to be configured”. If you do not hear this message, reset the camera by long pressing the Reset button on the motherboard, next to the micro SD card slot.
5. In the application, press the + icon to add your camera.
6. Select “WiFi Camera”.
7. Select the WiFi network you want to connect the camera to and add the network password. Note: For the first setup, position the camera and phone as close as possible to the WiFi router. Both devices must be connected to the same WiFi network.
8. Press “Confirm”, then “Next”.
9. A QR code appears on the phone screen. Position the phone in front of the camera lens. Wait for the connection. At the end, you will hear the connection confirmation message.
10. Choose a password for the camera.
11. Press “Confirm”.
12. Choose a name for your camera.
13. Choose the recording mode: continuous or only in case of an alarm.
14. Press “Next” and “Done” to complete the procedure.

Note: If the procedure fails, reset the camera and repeat the steps above.

Main interface

1. Camera settings menu
2. Image display mode
3. Go to full-screen mode
4. WiFi signal level
5. Zoom in / Zoom out
6. LED settings
7. Microphone. Press to talk
8. Speaker. Press to listen
9. Start recording. The files will be saved in the phone’s memory
10. Screenshot
11. Camera rotation (PTZ)
12. Display resolution: UHD or SD
13. Search for recordings saved on the micro SD card
14. LED settings

Camera presentation

1. Alarm LEDs (red/blue)
2. Laser LEDs
3. Light sensor
4. Lens
5. Microphone| 6. White LEDs
7. IR LEDs
8. Speaker
9. Micro SD card slot
10. Reset button
---|---

LED operating mode
Alarm LEDs (red / blue)
The two LEDs light up alternatively when the camera speaker is activated. For example, when in the application you press the microphone button to talk to the person in front of the surveillance camera.
White, IR and Laser LEDs
In the application, press “Night Vision & Alarm” to set the operation mode of the LEDs.
Full color: the 4 white LEDs light up
Infrared Vision: the 4 IR LEDs light up
Dual Light Alert: The Laser LEDs light up when the optical zoom is greater than 9X. Otherwise, only the IR LEDs light up. In Dual Light mode, the image is in color only when the camera detects human presence. Otherwise, the image is black/white as in Infrared mode.
The PNI House IP575 surveillance camera can be used independently (standalone) or can be connected to an NVR.
The camera can be controlled remotely from the phone through the ICSee or XMEye application or from the computer through the VMS application which allows, among others, to enable/disable the motion detection, human detection and face detection functions (only works when you connect the camera to an XM NVR).
Note: Due to the numerous updates of the applications, there may be some differences compared to the images or content presented in this manual.
Scan the QR code below to download the VMS Lite application:https://cdn.mypni.com/public/Software/11362/vms_lite-2021-11-22.zip

Simplified EU declaration of conformity
SC ONLINESHOP SRL declares that the PNI House IP575 video surveillance camera complies with RED Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address:
https://www.mypni.eu/products/8978/download/certifications

References

• mypni.eu/products/8978/download/certifications

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>