PNi MIKE 80 Bluetooth Microphone and Dongle User Manual
- October 27, 2023
- PNI
Table of Contents
PNi MIKE 80 Bluetooth Microphone and Dongle
Introduction
The PNI Mike 80 Bluetooth microphone can communicate wirelessly with the CB
radio (for example: PNI Escort HP 8001L). Thus, you can get out of your car
(up to 10 meters away) and continue the communication.
Note: In order for your CB radio to be compatible with the PNI Bluetooth
adapter, it must have power on the audio jack.
To allow wireless communication between the microphone and the CB radio, you
must connect to your CB radio the 2-pin (PNI-K) Bluetooth adapter included in
the package. Then, you need to pair the Bluetooth adapter with the Bluetooth
microphone.
You can connect the Bluetooth microphone to both the radio and the mobile
phone at the same time. That way, you can answer the phone without picking up
the phone.
Battery compartment
To open the battery compartment, turn the clip on the back of the microphone
to the right or left. Then, using a screwdriver, gently turn to the right the
screw on the top. Remove the cover.
The microphone includes a 3.7V 1200mAh Li-Ion battery.
Charging the battery
Insert one end of the USB cable included in the package into the jack on the
bottom of the microphone, and the other end of the cable into the USB port of
a computer or 230V-5V USB adapter.
While the battery is charging, the LED on the microphone is red. When the
battery is fully charged, the LED turns green.
Pairing microphone and Bluetooth adapter
Note: The microphone and the adapter are factory paired.
- When the CB radio is turned off, insert the Bluetooth adapter into the 2-pin PNI-K (Kenwood) connector of the radio.
- Turn on the radio and wait for the adapter to enter pairing mode. The LED starts flashing red and blue.
- Turn on the Bluetooth microphone by pressing and holding the M key. You will hear the prompt “Power on”. The LED on the microphone will flash red and blue until the connection between the microphone and the adapter is made.
- Once the connection is established, you will hear the prompt “Connected”. The LED on the microphone will flash blue.
- Press the PTT key to transmit.
Pair mobile phone, Bluetooth microphone and adapter
-
Pair your Bluetooth microphone with your mobile phone:
Nota: Turn off the radio before pairing the microphone with the phone- Turn on the Bluetooth microphone by pressing and holding the M key. You will hear the prompt “Power on”. The LED on the microphone will flash red and blue until the connection between the microphone and the adapter is made.
- Turn on Bluetooth function on your mobile phone. From the list of Bluetooth devices, select PNI Mike 80.
- Once the connection is established, you will hear the prompt “Connected”. The LED on the microphone will flash blue.
-
Turn off the Bluetooth microphone by holding down the M key until you hear the prompt “Power off”.
-
Pair the Bluetooth microphone with the adapter by following the steps in the “Pairing microphone and Bluetooth adapter” chapter.
-
Manually reconnect the microphone to your mobile phone.
Now all 3 devices: Bluetooth microphone, Bluetooth adapter and mobile
phone are connected.
To transmit, press the PTT key on the microphone. To answer a phone call,
briefly press the M key. To end a call, briefly press the M key.
Microphone technical specifications
- Frequency: 2.4GHz
- Transmission power: 2.5mW (4dB)
- Battery: Li-Ion 3.7V 1200mAh
- Communication distance: up to 10 m
- Operating time (100% charged battery): up to 8 hours
- Dimensions: 90 x 43 x 58 mm
- Weight: 113 g (battery included)
Dongle technical specifications:
- Frequency: 2.4GHz / Transmission power: 2.5mW (4dB)
- Connector: 2 pin PNI-K
- Communication distance: up to 10 m
- Dimensions: 40 x 28 x 17 mm
- Weight: 8g
Simplified EU Declaration of Conformity
SC ONLINESHOP SRL declares that PNI Mike 80 Bluetooth Microphone and Dongle is
in accordance with EMC Directive 2014/30/EU and RED Directive 2014/53/EU. The
full text of the EU Declaration of Conformity is available at the following
internet address:
https://www.mypni.eu/products/8575/download/certifications