levenhuk Discovery Report W10-S Sensor for Weather Stations User Guide

: June 4, 2024
: levenhuk

Table of Contents

Base station
Sensor
Care and maintenance
Battery safety instructions
Warranty
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Levenhuk Discovery Report W10 Weather Station clock

The kit includes a base station, sensor, user manual, and warranty.
Base station: Open the battery compartment cover (13) and insert 2 batteries according to the correct polarity. Close the cover.
Sensor: Open the battery compartment cover (4) and insert 2 batteries according to the correct polarity. Close the cover.
Sensor connection
Place the base station and the remote sensor within the effective transmission range. If the values are not received from a channel, сheck the batteries and try again. Check if there is any source of interference. When changing batteries, replace the batteries in the base unit first and then in the sensor in order to re-establish the connection. If an adapter supplies power to any of the devices, briefly disconnect the power to that device when replacing the batteries. If you change the batteries only in one of the devices (for example, in the sensor), the signal may not be received correctly. The effective range may differ depending on the unit’s position. Due to interference (various remote control devices, etc.), the maximum distance between the base unit and the sensor may be significantly reduced. In such cases, we suggest moving the base unit and sensor a little.
Time and temperature setting
Press the SET button, and then press it again and hold it for 3 seconds. The digits that are to be set are flashing. Press UP or DOWN to change the value, and then press the SET button to continue. The setting order: Hours > Minutes > Temperature unit. Finally, press the SET button to save the settings and exit.

Low battery indicator

If the low battery indicator is displayed for either the sensor or the base station, immediately change the batteries.

High & low-temperature records
High and low records (4, 5) are displayed for the outdoor temperature and are automatically cycled through today, 48 hours period, and all the time. To reset the high or low records, press and hold the UP or DOWN button, respectively, for 3—5 seconds.

Trend arrow indicators

The temperature trend indicator shows the trends for the forthcoming few minutes. Arrows indicate a rising, steady, or falling trend.
NOTE! A freeze alert indicator appears when the temperature falls below the freezing point (0°C/32°F).

Base station

Sensor connection status
Outdoor temperature
Trend arrow indicators
MIN. temperature record
MAX. temperature record
Indoor temperature
Time display
Wall mount hole
UP button
SET button
DOWN button
Battery compartment
Battery compartment cover

Base station

Temperature, units of measurement °F, °C
Operating temperature range (indoors) 0… +50°C (+32… +122°F)
Time format 24 hours, 12 hours
Weekday display language English
Screen monochrome
Power supply 2 ААА batteries (not included)
Wireless sensor 1 pc. (included)

Sensor

LED indicator
Wall mount hole
Battery compartment
Battery compartment cover

Sensor

Radio signal frequency 433MHz
Radio signal radius 100m (328ft.)
Operating temperature range (outdoors) –50… +70°C (–58… +158°F)
Power supply 2 AAA batteries (not included)

Care and maintenance

Take the necessary precautions when using the device with children or others who have not read or who do not fully understand these instructions. Do not try to disassemble the device on your own for any reason. For repairs and cleaning of any kind, please contact your local specialized service center. Protect the device from sudden] impact and excessive mechanical force. Store the device in a dry cool place. Only use accessories and spare parts for this device that comply with the technical specifications. Never attempt to operate a damaged device or a device with damaged electrical parts! If a part of the device or battery is swallowed, seek medical attention immediately. Children should use the device under adult supervision only.

Battery safety instructions

Always purchase the correct size and grade of battery most suitable for the intended use. Make sure the batteries are installed correctly with regard to polarity (+ and –). Never short-circuit batteries as this may lead to high temperatures, leakage, or explosion. Never heat batteries in order to revive them. Do not disassemble batteries. Keep batteries out of the reach of children, to avoid the risk of ingestion, suffocation, or poisoning. Utilize used batteries as prescribed by your country’s laws.

Warranty

2 years. For further details, please visit our website: www.levenhuk.com/warranty
The manufacturer reserves the right to make changes to the product range and specifications without prior notice.

© 2022 Discovery or its subsidiaries and affiliates.
Discovery and related logos are trademarks of Discovery or its subsidiaries and affiliates, used under license.
All rights reserved.
Discovery.com Levenhuk Inc. (USA): 928 E 124th Ave. Ste D,
Tampa, FL 33612, USA,+1-813-468-3001, contact_us@levenhuk.com.
Levenhuk Optics s.r.o. (Europe): V Chotejně 700/7, 102 00 Prague 102,
Czech Republic, +420 737-004-919,sales-info@levenhuk.cz. Levenhuk ® is a registered trademark of Levenhuk,
Inc. © 2006—2022 Levenhuk, Inc. All rights reserved.www.levenhuk.com