v-moda HEXM-PR True Wireless Earbuds User Guide
- June 6, 2024
- V-MODA
Table of Contents
HEXM-PR
TRUE WIRELESS EARBUDS
QUICK START
GET THE V-MODA APP ON GOOGLE PLAY OR THE APP STORE
THE FULL USER MANUAL IS AVAILABLE AT www.v-moda.com/manuals
|
---|---
- Hexamove Pro True Wireless Earbuds
- Charging Case
- 1 Set of Rings
- 1 Set of Ear Hooks
- 3 Sets of BLISS Fittings (S, M, L)
- 3 Sets of Slide-and-lock Shields
- USB-C Charging Cable
- Neck Strap
- Stabilizer
GETTING STARTED
- Download the V-MODA app and open it on your device
- Remove Hexamove Pro from their case to automatically turn the earbuds on; if they have not been paired with an active device previously, they will automatically enter pairing mode
- The earbuds will appear on the V-MODA app for you to complete pairing
- If your earbuds do not appear automatically on the V-MODA app, select V-MODA Hexamove Pro from your device’s Bluetooth list
Before using this unit, carefully read “USING THE UNIT SAFELY” and “IMPORTANT
NOTES” (supplied on a separate sheet).
After reading, keep the document(s) where it will be available for immediate
reference.
This document explains the specifications of the product at the time that the document was issued. For the latest information, refer to www.v-moda.com.
- This product is equipped with a lithium-ion battery.
- Even if you do not use this product for an extended period of time, you should charge it once every three months to prevent the internal lithium-ion battery from degrading.
- Ambient temperature range during charging: 5–35°C
However, in order to take full advantage of the rechargeable lithium-ion battery’s performance, we recommend that you charge it in a temperature range of 10–30°C.
Take care not to pinch your fingers when opening or closing the headphones.
Charge the device using the included USB cable. Do not use the included USB cable with any other device.
For the USA
SUPPLIER’S DECLARATION OF CONFORMITY Compliance Information Statement
Model Name: HEXM-PR
Type of Equipment: WIRELESS EARPHONE
Responsible Party: Roland Corporation U.S.
Address: 5100 S. Eastern Avenue Los Angeles, CA 90040-2938
Telephone : 323-890-3700
© 2021 Roland Corporation
FCC Information and Copyright
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1)This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. The device has been evaluated to meet general RF exposure requirements.
The device can be used in portable exposure conditions without restriction.
IC warning
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device.
changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
The device has been evaluated to meet general RF exposure requirements.
The device can be used in portable exposure conditions without restriction.
REGISTER NOW AT
www.v-moda.com/register