GTPLAYER GT890M Gaming Chair Instruction Manual

GTPLAYER GT890M Gaming Chair

Dear Customer

Thank you for choosing us. We appreciate your trust in us and value your business. Please feel free to email us directly if you have immediate feedback or concerns about your purchase. We’ll reply within 24 hours. At GTPLAYER, we’re always working hard to provide higher-quality products and service for our customers by listening to buyers’ comments and concerns. Our customers also rely on reviews from insightful people such as yourself to decide which of our products is right for them. If you have a moment to spare, please leave us feedback or review. It’s a very quick and easy way for you to make a difference in how we provide services for customers around the world. We would really appreciate the help if you have the time, but we totally understand if not. Either way, we look forward to serving you again in the future. If you have any further questions, please do not hesitate to contact our customer service for help.

Check Various Accessories

Details of accessories

Please check and ensure the things are in the package. You can contact us for help if something is not included

Instructions Before Using

Chair of Installation

Please work on soft floor or put on soft mat on the floor to avoid damaging the floor

1. Place the chair base ~side down. Insert the tip of the part9tnto Wand fix with M6*20 screws.
2. Insert the casters into the bottom of the base ~ Install gas lift and insert gas lift cover
3. Install the mechanism and armrests.
   • Attention: DO NOT tighten screws completely until all the screws are fixed In the correct position.
4. Place the seat on the gas 11ft.
5. AllgnO&G with the holes of seat, then tighten screws
6. Align O&G with the holes of back, then ~ tighten screws.
7. Put M5*8 screws through the holes of® &® V and tighten, then put the caps on
8. Install® &~ with M5* 8 screws, then put the caps on
9. Attach the headrest & lumbar pillow.

Frequently Asked Questions
Align O&G with the holes of back, then ~ tighten screws. Tighten all the screws completely until they are fixed In the correct position. Install® &~ with M5* 8 screws, then put the caps on.

Q: Why do I hear a creaking sound after using it for a period of time?
A: The mechanism may not flt the seat base. If you hear a creaking sound, please remove the mechanism and reassemble It. Please ensure all the screws are securely tightened.

Function introduction

• A: Lift up the button on the side of the arm to adjust the arm height, raise or lower to the desired position.
• B: Lift the handle to recline and release It to any desired position. Rest on  the backrest when resetting back to its normal position, otherwise, the backrest may rebound rapidly
• C: Pull upward on lever to achieve height adjustment.
  • Push in to lock, pull out to unlock the tilt of the chair.
• D: Adjust the tilt angle with the tilt-tension knob underneath the seat. Turn it clockwise to decrease the angle, and counterclockwise to increase the angle.

This device can play audio through the Bluetooth function

Note:

1. The audio cable should be inserted when the receiver is not turned on.

2. The receiver cannot be used when it is charging.

3. Bluetooth Receiver

4. Bluetooth Speakers

5. Recharge Cable

6. Speaker Extension Cable

Note:

1. The audio cable should be inserted when the receiver is not turned on.
2. The receiver cannot be used when it is charging.

Connecting to smartphones and other devices:

1. Long press the power button for 2 s to turn on the Bluetooth receiver. The LED indicator light flashes red and blue, and the voice prompt says that “the Bluetooth device is ready for pairing.”
2. Activate the Bluetooth function on your phone and search for wireless devices. Pair your phone to “GTPLAYER”.
3. After successful pairing, the voice will prompt “Pairing completed”.
4. If the connection is broken, you will hear a voice prompt that “the Bluetooth device has been disconnected and the device will be ready to pair again.”
5. If there is no connection, the Bluetooth receiver will automatically turn off after 5 min.
6. After connection, the blue light will light up. After a period of time, it will enter the energy-saving mode and only one blue light will be on for a long time. Click the power button to check the remaining battery. ( There are 4 blue lights in total, and one blue light represents 25% battery)
7. Charge the Bluetooth receiver with Type-C charging cable for 90 min, and it will be fully charged. The LED indicator light flashes blue when charging, and 4 blue lights are always on when fully charged.
8. The function used: When connecting the computer/mobile phone music, you can press the power button to realize the pause/play function

TECHNIQUE SPECIFICATION

10~15m
Charging Time| 90 min| Support Mobile System| Android / iOS

References

• Best Gaming Chairs——GTPLAYER – GTPLAYER EU
• Best Gaming Chairs——GTPLAYER – GTPLAYER EU

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>