nVent CADDY 150M1000S4 Standard U-Bolt Owner’s Manual

: June 16, 2024
: nVent Caddy

Table of Contents

nVent CADDY 150M1000S4 Standard U-Bolt
Product Information
Product Usage Instructions
FEATURES
PRODUCT ATTRIBUTES
DIAGRAMS
WARNING
Contact Information
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

nVent CADDY 150M1000S4 Standard U-Bolt

Product Information

Specifications

Catalog Number: 150M1000S4
Material: Stainless Steel 304 (EN 1.4301)
Pipe Size: 10
Outer Diameter: 10 3/4
Rod Size: 3/4
Screw Length: 4
A: 14 9/16
B: 11 1/2
Static Load: 4,830 lb

Features

Stainless steel construction for durability
Suitable for use with pipe size 10 and outer diameter of 10 3/4
3/4 rod size for secure fastening
4-inch screw length for easy installation
A and B dimensions for proper fitting
Can support a static load of up to 4,830 lb

Product Usage Instructions

Safety Precautions
Before using the product, please read and understand the following safety precautions:

Ensure proper installation as per nVent’s product instruction sheets and training materials.
Improper installation, misuse, or misapplication may cause product malfunction, property damage, serious bodily injury, and even death.
Always follow nVent’s instructions and warnings to avoid voiding your warranty.

Installation
Follow these steps to install the 150M Standard U-Bolt:

Identify the location where the U-bolt needs to be installed.
Ensure that the pipe size and outer diameter match the specifications of the product.
Place the U-bolt around the pipe, ensuring that it is centered.
Insert the rod through the holes in the U-bolt and tighten securely using the provided screws.
Verify that the U-bolt is firmly attached and can support the intended load.

Maintenance
To ensure optimal performance and longevity of the product, follow these maintenance guidelines:

Regularly inspect the U-bolt for any signs of damage or wear.
Tighten any loose screws or rods as necessary.
Keep the U-bolt clean and free from debris or corrosive substances.

Troubleshooting
If you encounter any issues with the product, refer to the troubleshooting section in nVent’s product instruction sheets or contact nVent customer service for assistance.

FAQ (Frequently Asked Questions)

Q: Where can I find nVent’s product instruction sheets?
A: You can find nVent’s product instruction sheets on their website at www.nvent.com. Additionally, you can request them from your nVent customer service representative.
Q: What should I do if I installed the product incorrectly?
A: Improper installation may result in product malfunction or damage. If you suspect incorrect installation, we recommend consulting nVent’s product instruction sheets or contacting nVent customer service for guidance.
Q: Can the 150M Standard U-Bolt support heavy loads?
A: Yes, the 150M Standard U-Bolt is designed to support a static load of up to 4,830 lb.
Q: How often should I inspect the U-bolt for maintenance?
A: It is recommended to regularly inspect the U-bolt for any signs of damage or wear. The frequency of inspection may vary depending on the specific application and environmental conditions.

CATALOG NUMBER
150M1000S4

FEATURES

Pipe support for general piping applications
Comes complete with 4 nuts (2 installed on each end)
Conforms with Federal Specification WW-H-171 (Type 24), Manufacturers Standardization Society ANSI®/MSS-SP-58 (Type 24)

PRODUCT ATTRIBUTES

Material: Stainless Steel 304 (EN 1.4301)
Pipe Size: 10″
Outer Diameter: 10 3/4″
Rod Size: 3/4″
Screw Length: 4″
A: 14 9/16″
B: 11 1/2″
Static Load: 4,830 lb

DIAGRAMS

WARNING

nVent products shall be installed and used only as indicated in nVent’s product instruction sheets and training materials. Instruction sheets are available at www.nvent.com and from your nVent customer service representative. Improper installation, misuse, misapplication or other failure to completely follow nVent’s instructions and warnings may cause product malfunction, property damage, serious bodily injury and death and/or void your warranty.