HALO SMD6S LED 6″ Round/Square Surface-Mount Downlights User Manual

: June 4, 2024
: HALO

Table of Contents

HALO SMD6S LED 6″ Round/Square Surface-Mount Downlights
DESCRIPTION
SPECIFICATION FEATURES
RECESSED HOUSING MOUNTING
DESIGNER SKINS (SOLD SEPARATELY)
ENERGY DATA
DIMENSIONS
ORDERING INFORMATION
Accessories
Read User Manual Online (PDF format)
Download This Manual (PDF format)

HALO SMD6S LED 6″ Round/Square Surface-Mount Downlights

HALO SMD6S LED 6 Round-Square Surface-Mount Downlights
product

DESCRIPTION

The Halo Surface Mount LED Downlight (SMD) is a low profile surface mounting luminaire with a modern look and high performance. SMD6 (6”)
is designed for installation in many 3-1/2” and 4” square, octagon, or round junction boxes. Supply wire adapter with LED quick wiring connector included. The SMD6 may also retrofit in 5” and 6” aperture IC and Non-IC recessed housings.

SPECIFICATION FEATURES

HOUSING

Non-electrically conductive polycarbonate frame.
High impact diffuse polystyrene lens provides shielding to the light guide with no pixilation
Stamped aluminum housing provides thermal cooling achieving L70 at 50,000 hours in IC and non-IC applications

GASKETS

Closed cell gasket achieves restrictive airflow and wet location requirements without additional caulking

OPTICS

Precision acrylic light guide organizes source flux into wide distribution with 1.2 – 1.4 spacing criteria useful for general area illumination

LED

Mid power LED array provide a uniform source with high efficiency and long life.
Available in 90 CRI minimum, R9 greater than 50 and color accuracy within 3 SDCM provide color accuracy and uniformity

DRIVER SMD 120V

Integral 120V 50/60Hz constant current driver provides noise free operation.
Continuous, flicker-free dimming from 100% to 5% with select leading or trailing edge 120V phase cut dimmers.
Dimming to 5% is best assured using dimmers with low end trim adjustment. Consult dimmer manufacturer for compatibility and conditions of use. (Note some dimmers require a neutral in the wallbox.)
Inline electrical quick connect and E26 adapter (provided) provides mains connections.

SMD 120-277V

Integrated 120-277V 60Hz constant current driver provides noise free operation.
SMD Universal Voltage (120-277V) configurations are recommended for use with compatible 0-10V DC low voltage dimmers only.

MOUNTING/RETENTION

Adjustable spider plate allows for quick installation into both junction boxes and recessed housings.
Torsion springs and friction blades included

ELECTRICAL JUNCTION BOX MOUNTING

The SMD may be used in compatible electrical junction boxes in direct contact with insulation including spray foam insulation.
Suitable for installation in many 3- 1/2” and 4” square, octagon, and round electrical junction boxes.
Note: SMD120-277V UNV is only compatible with junction boxes that provide minimum depth of 2-1/8”.
Installer must ensure compatibility of fit, wiring and proper mounting in the electrical junction box. This includes all applicable national and local electrical and building coded

RECESSED HOUSING MOUNTING

May be installed in IC recessed housings in direct contact with insulation
Note: Not for use in recessed housing in direct contact with spray foam insulation. Refer to NEMA LSD 57-2013.

Torsion Spring 5” & 6”

Precision formed torsion spring bracket kit included
The torsion springs adjust on the mounting plate to fit 5” or 6” compatible housings

Friction Blade 5” & 6”

Precision formed friction blades included
For retrofit in 5” and 6” housings without torsion springs mounting tabs.
Friction blade design allows the SMD to be installed in any position within the housing aperture (360 degrees)

DESIGNER SKINS (SOLD SEPARATELY)

SMD skins are accessory rings in both round and square. These skins attach to the SMD for a permanent finish. Refer to the SMD accessories specification sheet for details.
- Matte White (Paintable)
- Satin Nickel
- Tuscan Bronze

WARRANTY

* Five year limited warranty, consult website for details. www.cooperlighting.com

COMPLIANCE

cULus Certified for use with Halo housings and for use with other’s housings, see instruction sheet for conditions of acceptability.
Wet and Damp Location listed, airtight per ASTM-E283
Suitable for use in closets, compliant with NFPA® 70, NEC® Section 410.16 (A)(3) and 410.16 (C)(5)
EMI/RFI emissions per FCC 47CFR Part 15B
Contains no mercury or lead and RoHS compliant.
Photometric testing in accordance with IES LM-79-08
Lumen maintenance projections in accordance with IES LM-80-08 and TM-21-11.
Can be used for State of California Title 24 high efficacy luminaire compliance, reference the California Energy Commission Title 20 Appliance Efficiency Database for current listings.
Can be used for International Energy Conservation Code (IECC) and high efficiency luminaire compliance
ENERGY STAR® listed, reference database for current listings

ENERGY DATA

SMD6R6
SMD6S6

| Round| Square
---|---|---
Lumens

(5000K models)

SMD6R12
SMD6S12

| Round| Square
---|---|---
Lumens

(5000K models)

SMD6R12-E
SMD6S12-E

| Round| Square
---|---|---
Lumens

(5000K models)

| 1200| 1180
Input Power| 15.3| 16
Input Current| 0.133 A – (120V)

0.061 A – (277V)

| 0.132 A – (120V)

0.061 A – (277V)

DIMENSIONS

HALO SMD6S LED 6 Round-Square Surface-Mount Downlights fig
2

ORDERING INFORMATION

SAMPLE NUMBER: SMD6R6930WH=6” Round Surface Mount Downlight, 90CRI, 3000K
Junction Box Installation: Order junction box separately, as supplied by others, to complete installation. Recessed Installation: Order Halo recessed housing separately to complete installation.

Models

SMD6R= 6” Round Surface Mount Downlight
SMD6S= 6” Square Surface Mount Downlight

Finish

WH= Matte White

Accessories

Designer Trims

SMD6RTRMSN=6” Round SMD Satin Nickel
SMD6RTRMTBZ=6” Round SMD Tuscan Bronze
SMD6RTRMWH=6” Round SMD White (paintable)
SMD6STRMSN=6” Square SMD Satin Nickel
SMD6STRMTBZ=6” Square SMD Tuscan Bronze
SMD6STRMWH=6” Square SMD White (paintable)
T24HWKIT= Title 24 Cable harness kit used to convert incandescent and low voltage housings to LED HE26LED= E26 Screw base adapter for retrofit (included)