JYX D25, D25T Karaoke Machine Instruction Manual

August 7, 2024
JYX

JYX D25, D25T Karaoke Machine

Speaker Function Diagram

  1. Short Press : Volume Down
    Long Press: Previous Song

  2. Long Press: Power ON/OFF
    Short Press: Play/Pause

  3. Short Press: Volume Up
    Long Press : Next Song

  4. Short Press: Switch among three modes: Bluetooth, TF, and AUX modes
    (Note: TF/AUX modes require the respective devices to be connected for switching)
    Long Press: Turn on/Turn off the light.
    Double-click: Switch the light

  5. Type-C DCSV Charging

  6. TF Card Port

  7. AUX IN Jack

Microphone Function Diagram

  1. Long Press : Power ON/OFF
    Short Press : Microphone/Reverb/Accompaniment Adjustment
    Double Click: Play/Pause

  2. Long Press: Previous Song
    Short Press: Microphone Volume Up/Reverb Volume Up/Accompaniment Volume Up

  3. Long Press: Next Song
    Short Press: Microphone Volume Down/Reverb Volume Down/ Accompaniment Volume Down

  4. Long Press : Turn On or Off the Microphone Capsule
    Short Press : Magic Sound Loop Switch
    Double click : Enable or disable the accompaniment function.

  5. Blue Light : Power Indicator Light
    Red Light: Charging indicator light

  6. DCSV Charging

  7. Type-C USB

Volume Adjustment Instructions: In the powered-on state, short press the power button to select microphone volume, reverb volume, or accompaniment volume adjustment. Use in conjunction with the volume+/buttons to adjust the volume. Short press the volume – button to gradually decrease the microphone, reverb, and accompaniment volumes; short press the volume + button to gradually increase the microphone, reverb, and accompaniment volumes.

Bluetooth Usage Instructions

Bluetooth Connection to Mobile Phone

  1. Speaker Power On : Short press the power button for two seconds to turn on, the Bluetooth indicator light will flash .

  2. Bluetooth connection : Turn on your phone’s Bluetooth and search for “D25” to pair. When Bluetooth pairing is successful, it will indicate “Bluetooth connected”.
    Connection Prompt Tone (Note: If the pairing process requires a password, enter ‘0000’);

  3. Open the mobile app and play music
    Notes: After connecting the machine to the phone once, Bluetooth has a memory function, which can be automatically or manually connected after turning on. If you need to disconnect, you can disconnect it through the Bluetooth device of the phone.

Microphone Usage Instructions

  1. Microphone Power On : Long press the power button for 2 seconds to turn on.
  2. When the blue indicator flashes, the microphone will automatically pair with the speaker. A steady blue indicator light means the pairing is successful.
  3. When you sing with the microphone, the best performance is achieved when the microphone is within 1.5 to 3 meters of the speaker, though the actual range can reach up to 10 meters.
  4. If you only want to listen to music, you can short press the microphone power button to turn off the microphone, or long press for 2 seconds to turn it off to avoid feedback.
  5. When the microphone sound is poor or it does not power on, the microphone needs to be charged.

Common Problems and Solutions

Common Problems Cause Solution
No Sound During Speaker Play Mobile Phone Volume is Turned Off A.

Increase the phone volume.
B.   Increase the speaker volume
The speaker doesn’t turn on.| The speaker has low battery.| Charge the speaker.
Bluetooth cannot connect| Bluetooth is already connected to another device.| Turn off the Bluetooth on the connected phone.
Music distorts when playing in Bluetooth mode.| Volume is too high. Battery is too low| Turn down the phone volume. Recharge the battery in time.
No sound when inserting the TF card.| Does not support the special format. Does not read the card| A. Change the song format.
B. Reinsert the TF card.
The speaker cannot charge.| The cable is not plugged in tightly, poor contact.| A. Plug the power charging cable lightly.
B.   Replace the charging cable.
C. Ared light indicates normal charging.
The microphone has no sound.| Microphone volume has decreased.
Microphone volume is in the off state.| A.   Increase the microphone volume.
B. Short press the microphone power button to turn on the microphone volume.
The microphone is not powering on.| Low battery| Charge the microphone.
Microphone is stuttering| Low battery| Charge the microphone.
The microphone is not charging.| The cable was not securely plugged in, resulting in poor contact. The charging cable is damaged.| A. Securely plug in the power charging cable.
B. Rep lace the charging cable.
C. Ared light indicates normal charging.
whistle| The microphone is too close to the front of the speaker.| A. Adjust the distance from the speaker.
B. Avoid interference from obstacles.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals