HALO HZ-1004-ANA Griddles Outdoor Pizza Oven User Guide

HALO HZ-1004-ANA Griddles Outdoor Pizza Oven

Product Information

The product is a pizza oven with a model number of HZ-1004-ANA. It can be powered through an AC/DC adapter or by using two D batteries. The pizza oven comes with an igniter housing that requires one AA battery. It has a clean-out tray and a pizza stone tray assembly that needs to be inserted correctly to engage the motor socket. The product also comes with straps that need to be secured before use. The manufacturer has made every effort to eliminate sharp edges, but it is recommended to handle all components with care to avoid accidental injury.

Product Usage Instructions

1. Connect the white on/off switch cable to the motor and power cord of the AC/DC adapter or insert two D batteries. Insert one AA battery into the igniter housing.
2. Attach the legs using eight (8) M6 screws and install the knob by fixing it in place.
3. Install the motor using four (4) M6 screws.
4. Assemble the clean-out tray and insert the pizza stone:
5. Insert the clean-out tray.
6. Install the pizza stone tray assembly. Make sure to rotate it to engage the motor socket.
7. Insert the pizza stone.
8. Remove the pizza stone tray assembly and set it aside.
9. Remove all packaging materials from the pizza oven.

If any part is missing or damaged, do not attempt to assemble the appliance. Contact customer service for replacement parts at 1-833-572-1688. For more information on product usage, refer to the registration, assembly videos, care

• use, warranty, recipes, + more by scanning the QR code.

INSTALLATION INSTRUCTION

1. Remove pizza stone tray assembly. Set aside for Step 5.
   Remove all packaging materials from pizza oven.

2. Attach legs and knob

   • Attach legs using eight (8) M6 screws
   • Attach knob

3. Install motor

   • Install the motor using four (4) M6 screws

4. Connect the on/off switch cable (white) to the motor and power cord of the AC/DC adapter (black) or insert two D batteries. Insert one AA battery into the igniter housing.

5. Assemble clean out tray and insert pizza stone

   • a) Insert clean out tray.

   • b) Install pizza stone tray assembly.
     ( Note: make sure to rotate pizza stone assembly to engage motor socket).

   • c) Insert pizza stone.

WARNING The manufacturer has made every effort to eliminate any sharp edges. However, you should handle all components with care to avoid accidental injury.
NOTICE: Before assembly, make sure all parts are present. If any part is missing or damaged, do not attempt to assemble the appliance. Contact customer service for replacement parts at 1-833-572-1688.1

NEED MORE INSTRUCTIONS?
Scan for registration, assembly videos, care + use, warranty, recipes, + more.

BATTERIES NOT INCLUDED. Requires 2 D batteries for rotisserie motor and 1 AA battery for igniter.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>