HOMCOM 835-144V80RB Wooden Sideboard Cabinet Instruction Manual
- September 2, 2024
- HOMCOM
Table of Contents
HOMCOM 835-144V80RB Wooden Sideboard Cabinet
IMPORTANT , RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.
Tools Recommended
IF HAVE THIS ACCESSORY
QUICKFIT : Tighten quick fit until shoulder is flush with panel. Do not overtiahten or undertiahten.
CAM LOCK: When fitting cam lock, ensure starting position is correct before you insert connecting quickfit.
Quickfit head should be in the centre of the cam lock when the two panels are joined. Cam lock should be inserted before quickfit.
Turn cam lock clockwise to tighten.
NOTE : Pull inner and outer drawer runners apart before fixina them to panels.
Slide drawer runners apart until the drawer lock can be seen. as shown.
Press and hold the drawer runner lock and then continue to slide drawer runners apart, as shown.
Your inner and outer drawer runners are ready to be fixed to panels.
NOTE DIFFERENT MODELS
Please find the exact hole for installation, otherwise it will be misaligned. The screws on the drawer slide must be leveled, otherwise it will affect the smoothness of the d rawer.
Be careful to push in the board when the both sides slide way been aligned.
It may be necessary to adjust the hinges so that the doors align. Use the instructions below as a guide.
To adjust the door vertically loosen the screw asshown and move up and down as
needed.
To adjust the gap from the door to the main frame turn the screw clockwise or
anti-clockwise as needed.
To adjust the door laterally adjust the screw as shown by turning clockwise or
anti-clockwise.
Please fix other screws.
If it is a solid wall, please use expansion and self-tapping screws, if it is a wooden wall, only use self-tapping screws. please do not overtighten the screws
This is anti-dumping belt that fix the product to the wall and it can be used or not follow your needs.
The buckles have N optional adjustment
Adiust up and down for balance.
PARTS
HARDWARE
NOTE Do not confuse similar screws.
INSTALLATION INSTRUCTIONS
Done
If you have any questions, please contact our customer care center. Our
contact details are below
001-877-644-9366
customerservice@aosom.com
Imported by Aosom LLC 27150 SW Kinsman Rd Wilsonville, OR 97070 USA MADE IN CHINA