HALO HLC9 Series 9 Inch LED Surface Luminaire 1200 Lumen Series Installation Guide

HLC9 Series 9 Inch LED Surface Luminaire 1200 Lumen Series
Installation Guide HLC9 9″ LED Surface Luminaire
1200 Lumen Series
Typical Applications Residential

HLC9 Series 9 Inch LED Surface Luminaire 1200 Lumen Series

Interactive Menu

• Order Information page 2
• Product Specifications page 3
• Photometric Data page 4
• Product Warranty
• Dimming Guide

Top Product Features

• Below the ceiling installation, no clips or plates needed
• Installs in many 3-1/2” and 4” ceiling junction and pancake boxes
• 3000K or 4000K fixed CCT
• Dimmable down to 10%
• Clothes closet compliant, damp location listed

Dimensional and Mounting Details

Order Information
SAMPLE ORDER NUMBER: HLC9129301EWH

HLC9 = 9-Inch LED surface light
HLCMS9 = 9-Inch Motion Sensor, LED surface light| 12 = 1200 lumens (nominal)| 930 = 90 CRI minimum, 3000K CCT
940 = 90 CRI minimum, 4000K CCT| 1E = 120V 60Hz, LE & TE phase cut 10% dimming| WH = matte white flange
Notes| Notes| Notes| Notes| Notes

COMPATIBLE WITH EATON’S CROUSE-HINDS JUNCTION BOXES

|
---|---
TP316
for non-metallic cable 4” x 4” x 2-1/8”
(102mm x 102mm x 54mm)| TP317
for metal clad cable 4” x 4” x 2-1/8”
(102mm x 102mm x 54mm)

• TP316 – for non-metallic cable
• TP317 – for metal clad cable
• UL Listed
• Refer to www.crouse-hinds.com

**COMPATIBLE WITH MANY OTHER JUNCTION BOXES***

|
---|---
4″ octagon light fixture/fan steel box
4″ x 4″ x 2-1/8″
(102mm x 102mm x 54mm)| 4″ octagon steel box
4″ x 4″ x 1-1/2″
(102mm x 102mm x 38mm)
|
4″ round new work non-metallic
light fixture/fan box
4″ diameter x 2-3/16″ (102mm x 56mm)| 3-1/2″ round new work
non-metallic ceiling box
3-1/2″ diameter x 2-3/4″ (89mm x 70mm)
|
3-1/2″ round old work non-metallic box
4-1/4″ O.D. flange, 3-1/2″ I.D. x 2-5/8” (108mm O.D., 89mm I.D. x 67mm)| 4” round surface mount box
4″ diameter x 1-1/2” (102mm x 38mm)
|
4″ round new work non-metallic box with hanger bar assembly
4″ diameter x 2-3/16″ (102mm x 56mm)| Round ceiling pan
4” diameter x 13/16” (102mm x 21mm)

*This is a representative list of compatible junction boxes only. Information contained in this literature about other manufacturers’ products is from published information made available by the manufacturer and is deemed to be reliable,  but has not been verified. Eaton makes no specific recommendation on product selection and there are no warranties of performance or compatibility implied. Installer must determine that site conditions are suitable to allow proper installation of the mounting bracket in the box.

Product Specifications

Construction

• Stamped aluminum

Optics

• Precision engineered optic provides uniform luminance from a low profile convex lens
• Removable lens for easy install from below installation

LED

• Backlit LED technology
• Color Temperature options include: 3000K or 4000K
• 90 CRI is standard
• L70 at 50,000 hours projected in accordance with TM-21

Driver

• Integral 120V 60Hz constant current driver provides virtually noise free operation.
• Continuous, flicker-free dimming from 100% to 10% with select leading or trailing edge 120V phase cut dimmers. See dimming guide.
• Dimming to 10% is best assured using dimmers with low end trim adjustment. Consult dimmer manufacturer for compatibility and conditions of use. (Note some dimmers require a neutral in the wall box.)
• Inline electrical quick connect (provided) provides mains connections

Electrical Junction Box Mounting

• HLC9 may be used in compatible electrical junction boxes in direct contact with insulation including spray foam insulation
• Install from below design
• Suitable for installation in many 3-1/2” and 4” octagon and round electrical junction boxes.
• Compatible with compact (pancake) junction boxes
• Installer must ensure compatibility of fit, wiring and proper mounting in the electrical junction box. This includes all applicable national and local electrical and building coded NEMA LSD 57-2013

Compliance

• UL certified for US and Canada
• Damp Location listed
• Suitable for use in clothes closets when installed in accordance with the NEC 410.16 spacing requirements.
• EMI/RFI emissions per FCC 47CFR Part 15B
• Contains no mercury or lead and RoHS compliant.
• Photometric testing in accordance with IES LM-79-08
• Lumen maintenance projections in accordance with IES LM-80-08 and TM-21-11.
• Can be used for State of California Title 24 high efficacy luminaire compliance.
• Can be used for International Energy Conservation Code (IECC) and Washington State Energy Code high efficiency luminaire Compliance
• ENERGY STAR® Certified luminaire – consult ENERGY STAR® Certified Product List

Warranty

• Five year limited warranty, consult website for details. www.cooperlighting.com/legal

Energy Data

Photometric Data

HLC9129301EWH
Spacing criterion: (0-180) 1.27 (90-270) 1.27 (Diagonal) 1.4
Beam Angle: 115°
Lumens: 1255
Input Watts: 17.41 W
Efficacy: 72.1 LPW
Test Report: HLC9129301EWH.IES

TM-30-15

| Rf = 94
---|---
Rg = 98

CRI/CIE

| Ra = 94.6
R9 = 58.4

TM-30-15

| Rf = 94
Rg = 98

CRI/CIE

| Ra = 94.6
R9 = 58.4

HLCMS9129301EWH
Spacing criterion: (0-180) 1.27 (90-270) 1.27 (Diagonal) 1.39
Beam Angle: 115°
Lumens: 1285
Input Watts: 17.24 W
Efficacy: 74.6 LPW
Test Report: HLCMS9129301EWH.IES

TM-30-15

| Rf = 94
---|---
Rg = 98

CRI/CIE

| Ra = 94.6
R9 = 58.4

Product Specifications

HLC9129301EWH

HLC9129401EWH

HLCMS9129301EWH

HLCMS9129401EWH

Cooper Lighting Solutions
1121 Highway 74 South
Peachtree City, GA 30269
P: 770-486-4800
www.cooperlighting.com
© 2020 Cooper Lighting Solutions
All Rights Reserved.
Specifications and dimensions
subject to change without notice.
PS518152EN
June 23, 2022 1:33 PM

References

• Legal | Cooper Lighting Solutions
• crouse-hinds.com
• cooperlighting.com/api/assets/v1/file/CLS/content/733dde77636d4d33bba9ad40016993bb/halo-hlc9-dimming-tss
• HLC9 | Cooper Lighting Solutions | Cooper Lighting Solutions

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>