Brainwavz Audio WH-1000XM5 M3 Replacement Earpads User Manual
- June 15, 2024
- Brainwavz Audio
Table of Contents
Brainwavz Audio WH-1000XM5 M3 Replacement Earpads
Product Information
The Earpads for Sony WH-1000XM5 are replacement ear cushions designed specifically for the Sony WH-1000XM5 headphones. These earpads provide comfort and help maintain optimal sound quality during extended use. The package includes two earpads, one for the left side and one for the right side.
Product Usage Instructions
- Gently insert a flat, blunt tool (such as a blunt knife, metal ruler, or credit card) between the old earpad and the headphone body at location A.
- Carefully twist the tool back and forth to loosen the earpad. Repeat this step around the earpad until it comes free.
- If desired, remove the foam pads (B) and clean them before installing the new earpads. Please note that replacement foam pads are not included.
- Re-insert the foam pads (B) before installing the new earpads. Ensure they are placed correctly.
- Identify the specific earpad for the left and right sides, as indicated by the labels L and R respectively.
- Place the earpad onto the earcup, ensuring the correct orientation according to the labels (L for left side and R for right side).
- Push down firmly on the earpad in all six locations. You may hear a small click when it is properly in place. Some tabs may require a little more force to insert correctly.
Please refer to the user manual for further information and troubleshooting. The images provided in this guide are for illustration purposes only.
Remove Old Pads
NOTE
Pads are secured via 6 click-in tabs
- Gently insert a flat, blunt tool between the earpad and headphone body A
- Carefully twist your tool back and forth until the pad starts to break loose, repeat around the pad until it comes free.
- (Use a blunt knife, metal ruler or credit card as a removal tool)
- At this point you may like to remove the foam pads B and clean them before installing your new pads. (Replacement foam NOT included)
Insert Foam Pad
Remember to re-insert the foam before installing the new pads.
Get To Know The Earpads
There is a specific pad for left and right, pads also must be in the right orientation, as shown above.
Install Replacement Earpad
- Place the earpad onto the earcupensure correct orientation.
- Push down on the earpad firmly in all 6 locations – a small click may be heard when in place.
- Ensure all tabs are correctly inserted, some may take a little more force than others.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>