NKOK XQPMZ062424TX Full Function Radio Controlled Race Car Instruction Manual

: August 17, 2024
: NKOK

Table of Contents

NKOK XQPMZ062424TX Full Function Radio Controlled Race Car
Product Information
Product Usage Instructions
Battery Installation
Transmitter
GENERAL BATTERY SAFETY INFORMATION
SAFETY PRECAUTIONS
Basic Trouble Shooting
FAQ
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

NKOK XQPMZ062424TX Full Function Radio Controlled Race Car

Product Information

Specifications

Item#: 81424
Description: Luxe – Lamborghini Veneno
AVC#: AVC81413-060624-V2.2
Spec. List Dims: 17.69L x 8.5H
Stage: Instruction Manual
Date: 06.06.24
Designer: E. Gomez

Product Usage Instructions

Power On/Off
Toggle the ON/OFF switch located on the vehicle to turn it on or off.

Pairing the Vehicle
To pair the vehicle with the transmitter, follow these steps:

The Red LED on the transmitter will blink while searching for the vehicle.
Turn on the vehicle.
The Red LED will turn off once the pairing is successful.

Vehicle Operation
Ensure proper operation by avoiding conditions that may interfere with the signal. Improper handling can affect the vehicle’s performance.

Safety Precautions
Always follow safety guidelines to prevent accidents or damage to the vehicle or surroundings.

If you have questions or difficulty operating this toy
DO NOT RETURN IT TO THE STORE
Call us Toll-Free: 888-656-5869
Monday – Friday between 10:00 am – 4:00 pm Pacific Standard Time or email us at: customerservice@nkok.com

WARNING:
CHOKING HAZARD — Small parts.
Not for children under 3 years.

Retain the packaging and manual for future reference as they contain important information.

Battery Installation

Vehicle

Turn screw counter-clock to lift cover. Slide battery door to flip open.
(Switch must be in “OFF” position)
5 x 1.5V LR6/R6/AA (Not Included)

Transmitter

2 x 1.5V LR6/R6/AA (Not Included)
Turn screw counter-clock to lift cover.

GENERAL BATTERY SAFETY INFORMATION

Read and follow operating instructions.

Do not mix old and new batteries.
Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium) batteries.
Only batteries of the same or equivalent type as recommended are to be used.
Batteries are to be inserted with the correct polarity.
Exhausted batteries are to be removed from the product.
The supply terminals are not to be short-circuited.
Non-rechargeable batteries are not to be recharged.
Rechargeable batteries are to be removed from the product before being charged.
Rechargeable batteries are only to be charged by an adult.
Dispose of battery(ies) safely.
Do not dispose of this product in a fire. The batteries inside may explode or leak.
Batteries should be changed by adults only.

HOW TO PAIR
Red LED will blink while searching for vehicle. Turn on vehicle. Red LED will turn off once paired (pairing successful).

VEHICLE OPERATION

Any of the following conditions may interfere with the behavior and function.
The transmitter signals can easily be interrupted.
Improper handling may hamper the performance of the vehicle.

SAFETY PRECAUTIONS

Remember to avoid water, heat, sand and high impact!

Read the operating manual thoroughly before playing.
Users should keep strict accordance with the instruction manual while operating the product.
Keep vehicle away from wet surfaces or rain.
Avoid running on thick carpet or dusty floors.
Avoid collision on hard surfaces.
Keep vehicle away from Sandy and Dusty areas.
Do not operate your vehicle on the streets.
Turn off the transmitter/charger and the toy when not in use.
Remove batteries from transmitter/vehicle when not in use.

CAUTION: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter.
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

The device is compliance with RF field strength limits, users can obtain Canadian information on RF exposure and compliance.
This Class B digital apparatus complies with Canadian ICES-003. Conforms to ASTM F963 standard.

Basic Trouble Shooting

Problem – Vehicle will not START.

Power Switch is off. Turn On the Switch.
Batteries are installed with incorrect polarities. Check the + and – markings to ensure batteries are properly aligned.
Batteries are drained. Replace with new set of alkaline batteries.
Rusty contacts. Clean terminals with sandpaper.

Problem – Vehicles does not respond to controls.

Transmitter battery is drained. Replace with new battery.
Vehicle is out of range. Bring transmitter closer to the vehicle.
Interference at the surrounded area. Move to a better location to operate the vehicle.

RF Exposure Requirement
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.