Hawkley NF101B102 Rear Bumper Fit for Ford Pickup Truck User Manual
- June 1, 2024
- Hawkley
Table of Contents
NF101B102 Rear Bumper Fit for Ford Pickup Truck
“`html
Specifications:
-
Model: NF101B102 / NF101B103
-
Material: Q235A
-
Product Dimensions: 74.5 x 11 x 10.8
inches -
Package Dimensions: 31.8 x 26.7 x 12.6
inches -
Product Weight: 80.4 lbs / 66.1 lbs
Product Usage Instructions:
Required Tools:
- Socket
- Ratchet
- Wrench
- Allen Wrench
- Safety Glasses
- Scissors
- Masking tape
- Plastic trim tool
Parts Information:
No. | Parts Name | Size | Qty | Color |
---|
Installation Instructions:
Step 1: Unboxing and Parts Check
Open the carton and verify all parts are present.
Step 2: Removing Original Bumper
Remove the original bumper and prepare for installation.
Step 3: Assembling Rear Bumper
Assemble the rear bumper and tighten the bolts according to the
provided diagram.
Frequently Asked Questions (FAQ):
Q: Do I need any special tools for installing the bumper?
A: Yes, you will need a socket, ratchet, wrench, allen wrench,
safety glasses, scissors, masking tape, and a plastic trim
tool.
Q: Are there different options for front bumper
installation?
A: Yes, there are two options for front bumper installation. You
can choose one based on your preference.
“`
REAR BUMPER
User Manual 2015-2020 F-150 Excluding Raptor
NF101B102
NF101B103
Model: Material: Product Dimensions: Package Dimensions: Product Weight:
NF101B102 / NF101B103 Q235A 74.5 x 11 x 10.8 inch 31.8 x 26.7 x 12.6 inch 80.4 lbs / 66.1 lbs
¸Thank you for purchasing the REAR BUMPER. Please read this manual carefully
and keep it properly if you need to refer to it afterward. If you need any
support or assistance, please contact us with your product model number and
order number, and our support team will help you solve problems.
WARNING
¸ This product is designed primarily to enhance the appearance of the vehicle.
Do not rely in any way on the components of this product to protect against
injury or death in the event of an accident. To reduce the risk of serious
injury or property damage, please read all safety messages and understand all
instructions and procedure notices before attempting to install or use this
product.
CAUTION
¸ Properly torque and recheck fasteners and security of step tread after 250
miles and inspect frequently. Do not use if damaged.
1
Socket
REQUIRED TOOLS
Ratchet
Wrench
Allen Wrench Safety Glasses
Scissors Masking tape Wrench Plastic trim tool
Parts Information
NO. Parts Name
Size
Line Graph
Qty Color
102
Mid Bumper
&
/
Side Wings
103
or
1
Black
/
Brackets
/
/ Trailer Hitch
/
/
Led lights
4inch
/ Cable Wires 0.75×1.2m
/
Wire Connector Clips
/
/
Shackles
/
/
Zip ties
5×250 2
1
Black
2
Black
2
Black
2
Black
8
/
2
/
10
/
NO. Parts Name W22 Spring Washer
Size 10
Line Graph
Qty Color 5 Dacro Black
W23 Flat Washer
B35
Half Head Allen Bolts
N15 Hex Nuts
B15
Half Head Allen Bolts
N14
Hex Flange Nuts
B74
Half Head Allen Bolts
N11
Hexagon Lock Nut
N24 Hex Nuts
10 M10x35
M10 M8x20
M8 M6x35
M6 M12
B75 Hex Bolts
M12x45
W29 Spring Washer
12
W28 Flat Washer
12
9 Dacro Black
5 Dacro Black
5 Dacro Black
9 Dacro Black
9 Dacro Black
5 Dacro Black
5 Dacro Black
11
Blue Zinc Plating
11
Blue Zinc Plating
11
Blue Zinc Plating
17 Dacro Black
¸ Note: spare parts such as W22aW23aB35aN15aB15aN14aB74aN11 aN24aB75aW29 and
W28 are provided with 1PCS each (included in the
number of parts details).
3
Installation Instructions
¸Note: This installation manual takes one of the models as an example
Step 1: Open the carton and take out the parts. Check whether the number of
components is complete.
Step 2: Remove the original bumper and prepare the parts needed to install the
bumper.
Step 3: Splicing the rear bumper and tighten the bolts.
Bumper
Side Wings(L & R)
B15:M8x20
x1
N14:M8
N24:M12
x1 B75:M12x45
x2 W29:12
x2 10 W28:12
x8 11
x8
x4
x4
x4
1
x4
x2
11
12 34
Install the 4inch Led Lights(2pcs)
2
x4
11
1
2
Install the Trailer Hitchs(2pcs)
4
Install the Shackles 2pcs)
The bumper is assembled. NF101B102 Front Back NF101B103 Front Back
5
Step 4: Install the Radar Probe. NoteIf the car does not have a radar probe, this step can be ignored.
B74:M6x35
N11:M6
x4
x4
Back of bumper
Pull out the rubber stoppers
Rubber stopper
Radar probe install hole
Radar probe
Radar probe install hole
Plates must be clamps the radar probe
Installed successfully 6
Step 5: Install the original spare tire lock
original 7-way trailer plug wiring harness and original license Light. 1.
Install the original spare re lock.
Spare tire lock Key Align the holes
Spare tire lock installed successfully
7
2. Install the original 7-way trailer plug wiring harness.
Back of the bumper
Spare tire lock
3. Install the original license Lights(2pcs).
Sprang open
license light Back of the bumper
license light
Bulb
license light Bulb
Connect successfully
8
3. Connect the Trailer plug wiring, 4inch Led lights and Cabel wires. 7-Way Connector Wiring/Funcon Diangram
4inch Led light
Cabel wire 9
Black Yellow
Trailer plug wiring
Step 5: Mounting the bumper and tighten the bolts. Note: There are two options for the front bumper installation, choose one according to your personal preference.
Bumper
Brackets(L & R)
W22:10
W23:10
B35:M10x35
x1
x1
B35:M10
N24:M12
x4 B75:M12x45
x8 W29:12
x4 10 W28:12
x4
x6
x6
x6
x12
Option 1Install the bumper with the factory trailer.
Mounting holes.
Factory trailer
10
10
Bumper
Riginal trailer rack
10
Option 1Install the bumper with Bracket.
Mounting holes
10 Car
Brackets installed succeed
10
11
The Rear Bumper is installed. NF101B102
NF101B103
12
Step 6: Insert the radar plug. 13
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>