Hawkley NJL01G104 Inner Fender Liners User Manual
- June 1, 2024
- Hawkley
Table of Contents
INNER FENDER FARES
User Manual
2018-2022 Wrangler JL
2019-2022 Jeep Gladiator JT
NJL01G104 Inner Fender Liners
| Model: | NJL01G104-Front | NJL01G104-Rear |
|---|---|---|
| Material: | Q235A | Q235A |
| Product Dimensions: | 36.22 x 19.68 x 9.05 inch | 39.2 x 13.3 x 21.8 inch |
| Package Dimensions: | 36.95 x 12.68 x 17.6 inch | 45.3 x 22 x 89.8 inch |
| Product Weight: | 19.29 lbs | 21.83 lbs |
※ Thank you for purchasing the FRONT INNER FENDERS. Please read this manual carefully and keep it properly if you need to refer to it afterward. If you need any support or assistance, please contact us with your product model number and order number, and our support team will help you solve problems.
※ This product is designed primarily to enhance the appearance of the vehicle. Do not rely in any way on the components of this product to protect against injury or death in the event of an accident. To reduce the risk of serious injury or property damage, please read all safety messages and understand all instructions and procedure notices before attempting to install or use this product.
※ Properly torque and recheck fasteners and security of step tread after 250 miles and inspect frequently. Do not use if damaged.
REQUIRED TOOLS
Parts Information
Parts NO.| Parts Name| Size| Line Graph| Qty|
Color
---|---|---|---|---|---
/| Front Inner Fender Flares 1| /| | 2| Black
/| Front Inner Fender Flares 2| /| | 2| Black
/| Rear Inner Fender Flares 1| /| | 2| Black
/| Rear Inner Fender Flares 3| /| | 2| Black
N09| Hex Flange Nuts| M6| | 26| Dacro Black
B05| Half Head Allen Bolts| M6 x 10| | 16| Dacro Black
B07| Half Head Allen Bolts| M6 x 20| | 18| Dacro Black
W09| Spring Washers| Φ6| | 18| Dacro Black
W13| Flat Washer| Φ6x18x1mm| | 32| Dacro Black
B15| Half Head Allen Bolts| M8x20| | 6| SUS304
W19| Flat Washer| Φ8x24x2mm| | 6| SUS304
W16| Spring Washer| Φ8| | 6| SUS304
*Note: spare parts such as N09. B15. B07. W09. W13, B15. W19. W16 are provided with 2PCS each (included in the number of parts details).
Installation Instructions
Step 1: Open the carton and take out the parts. Check whether the number
of components is complete.
Step 2: Remove the original front fender flares and original front inner
fender flares and prepare the parts needed to install the Front Inner Fender
Flares.
Step
3: Splice the front inner fender flares.
Step 4: Install the front inner
fender flares. 
Step 5: Tighten all the bolts and nuts.
Step 6: Installation of a front inner fender flares is complete. Please
do periodic inspections of the inner fender flares to make sure that all
hardware is secure and tight.
Step 7: Install the original front fender flares.
Step 8: Splice the rear inner fender flares.
NOTICE: Do not tighten the bolts in this step.
Step 9: Splice the rear inner fender flares.
Step 10: Tighten all the
bolts and nuts.
Step 11: Installation of a fear inner fender flares is complete. Please
do periodic inspections of the fear fenders to make sure that all hardware is
secure and tight.
Note: Please choose according to the situation of your car
Step 12: Install the original rear fender flares back on the car.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>