Hawkley NFB01H103 Front Rear Fender Flares Ford Bronco User Manual
- June 1, 2024
- Hawkley
Table of Contents
Hawkley NFB01H103 Front Rear Fender Flares Ford Bronco
| Model: | NFB01H103 |
|---|---|
| Material: | Q235A |
| Product Dimensions: | 41.9 x 0.1 x 13.7 inch |
| Package Dimensions: | 45.5 x 18.3 x 4.7 inch |
| Product Weight: | 9.5 lbs |
Thank you for purchasing the FENDER FLARES (FRONT +REAR). Please read this manual carefully and keep it properly if you need to refer to it afterward. If you need any support or assistance, please contact us with your product model number and order number, and our support team will help you solve problems.
WARNING
This product is designed primarily to enhance the appearance of the
vehicle.
Do not rely in any way on the components of this product to protect against
injury or death in the event of an accident. To reduce the risk of serious
injury or property damage, please read all safety messages and understand all
instructions and procedure notices before attempting to install or use this
product.
CAUTION
Properly torque and recheck fasteners and security of step tread after 250
miles and inspect frequently. Do not use if damaged.
REQUIRED TOOLS
Parts Information
| NO. | Parts Name | Size | Line Graph | Qty | Color |
|---|---|---|---|---|---|
| / | Left&Right Front Fender Flares | / | **** | **** |
2
| Black
/| Left&Right Rear Fender Flares| /| |
2
| Black
B66| Half Head Allen Bolts| M6x25| |
25
| Dacro Black
N09| Hex Flange Nuts| M6| |
25
| Dacro Black
W19| Flat Washer| Φ8x24x2| |
5
| Dacro Black
Note:
spare parts such as B66、N09、W19 are provided with 1PCS each (included in the
number of parts details).
Installation Instructions
Step 1: Open the carton and take out the parts. Check whether the number of components is complete.
Step 2: Install the Front Fender Flares.
Tips: If the hole is large, please add flat washers to prevent the bolt from sinking into the hole.
Repeat the above steps for the other side.
Step 3: Install the Rear Fender Flares.
Tips: If the hole is large, please add flat washers to prevent the bolt from sinking into the hole.
Repeat the above steps for the other side.
