Hawkley NF101A105-1A Front Bumper User Manual
- June 1, 2024
- Hawkley
Table of Contents
Hawkley NF101A105-1A Front Bumper User Manual
※ Thank you for purchasing the FRONT BUMPER Mid Bumper. Please read this
manual carefully and keep it properly if you need to refer to it afterward. If
you need any support or assistance, please contact us with your product model
number and order number, and our support team will help you solve problems.
※ This product is designed primarily to enhance the appearance of the
vehicle.
Do not rely in any way on the components of this product to protect against
injury or death in the event of an accident. To reduce the risk of serious
injury or property damage, please read all safety messages and understand all
instructions and procedure notices before attempting to install or use this
product.
※ Properly torque and recheck fasteners and security of step tread after
250 miles and inspect frequently. Do not use if damaged.
REQUIRED TOOLS
Socket
| Ratchet
| Wrench
| Allen Wrench
| Safety Glasses
Parts Information
| NO. | Parts Name | Size | Line Graph | Qty | Color | |
|---|---|---|---|---|---|---|
| 1 | / | Mid Bumper | / |  | 1 | Black | ||||
| 2 | / | Brackets L/R | / | 1 | Black | |
| 3 | / | License Bracket | / |  | 1 | Black | ||||
| 4 | / | Shackles | / | 2 | Black | |
| 5 | B68 | Hex Bolts | M12x40 | |||
| 9 | Dacro Black | |||||
| 6 | W25 | Spring Washer | Φ12 | |||
| 9 | Dacro Black | |||||
| 7 | W27 | Flat Washer | Φ12x30x3 | |||
| 13 | Dacro Black | |||||
| 8 | / | Flat Washer | Φ12x44x3 | |||
| 7 | Dacro Black | |||||
| 9 | N19 | Hex Nuts | M12 | |||
| 9 | Dacro Black | |||||
| 10 | B46 | Half Head Allen Bolts | M6x40 | |||
| 3 | Dacro Black | |||||
| 11 | N11 | Hex Lock Nuts | M6 | |||
| 3 | Dacro Black |
Installation Instructions
Step 1: Open the carton and take out the parts. Check whether the number
of components is complete.
Step 2: Remove the original bumper and prepare the parts needed to
install the bumper.
Step 3: Install the Shackles.
A. Take out the bolts into the bumper.
B. Install the bolts of Decorative Plate and license bracket on step A.
Have not winch plate
Install winch plate 
Step 4: Install the Radar Probe.
Note : If the car does not have a radar probe, this step can be
ignored.
11 N 11: M 6
10 B 4 6: M 6 x 40
Step 5 : Install the Bracket L/R.
2
x2
5 B68: M12
x6
6 W25: Φ12
x6
7 W27: Φ12x30x3
x 12
9 N1 9: M 12
x6
Brackets installed successfully
Step 6: Install the Mid Bumper.
Step 7 : Install the Shackles.
Shackles installed successfully
FRONT BUMPER SIDE WINGS
| Model: | NF101A105-2A |
|---|---|
| Material: | Q235A |
| Product Dimensions: | 22.1 x 24 x 11.3 inch |
| Package Dimensions: | 34.2 x 21.1 x 10.2 inch |
| Product Weight: | 39.5 lbs |
※ Thank you for purchasing the FRONT BUMPER Side Wings. Please read this manual carefully and keep it properly if you need to refer to it afterward. If you need any support or assistance, please contact us with your product model number and order number, and our support team will help you solve problems.
※ This product is designed primarily to enhance the appearance of the
vehicle.
Do not rely in any way on the components of this product to protect against
injury or death in the event of an accident. To reduce the risk of serious
injury or property damage, please read all safety messages and understand all
instructions and procedure notices before attempting to install or use this
product.
※ Properly torque and recheck fasteners and security of step tread after 250 miles and inspect frequently. Do not use if damaged.
REQUIRED TOOLS| Socket
|
Ratchet
---|---|---
Parts Information
| NO. | Parts Name | Size | Line Graph | Qty | Color |
|---|---|---|---|---|---|
| 1 | / | Side Wings L/R | / |  | 1 | Black | |||
| 2 | / | Light brackets | / | 2 | |
| 3 | / | PlatesR | / | 2 | |
| 4 | / | 4 Inch Ledlight | / | 2 | |
| 5 | / | Cable Wires | 2×0.75mm | 2 | |
| 6 | / | Wire Connector Clips | / | 5 | |
| 7 | B22 | Hex Flange Bolts | M8x25 | 13 | |
| 8 | W19 | Flat Washer | 08x24x2 | 7 | |
| 9 | N14 | Hex Flange Nuts | M8 | 13 | |
| 10 | B46 | AHlalelfnhiBeoaldts | M6x40 | 5 | |
| 11 | N11 | Hex Lock Nuts | M6 | 5 |
※Note:
Spare parts such as B22、W19、N14、N09、B46、N11 are provided with 1PCS each
(included in the number of parts details).
Installation Instructions
Step 1: Open the carton and take out the parts. Check whether the number
of components is complete.
Step 2 : Splicing the Light brackets.
- x1
- x1
- x1
7 B22: M8
x2
8 W19: Φ8
x3
9 N14: M8
x2
A. Take out the bolts into the decorative plate.
B. Install the bolts of decorative plate and light brackets on step
A.
Step 3: Install the 4 Inch Ledlight.
You can connect the 4inch Led light lights wiring harness to the headlight
DRLs or fog light wiring. but my suggestion is to connect to the fog lights
for on/off control!
7 B22: M8
x8
9 N14: M8
x8
Side Wings is assembled
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>