Hawkley NF101A105-1A Front Bumper Mid User Manual
- June 1, 2024
- Hawkley
Table of Contents
Hawkley NF101A105-1A Front Bumper Mid
FRONT BUMPER Mid Bumper
Specification
- Model: NF101A105-1A
- Material : Q235A
- Product Dimensions : 44.5 x 10.5 x 9.1 inch
- Package Dimensions: 48 x 13.2 x 9.4 inch
- Product Weight: 57 lbs
Thank you for purchasing the FRONT BUMPER Mid Bumper. Please read this manual carefully and keep it properly if you need to refer to it afterward. If you need any support or assistance, please contact us with your product model number and order number, and our support team will help you solve problems.
WARNING
This product is designed primarily to enhance the appearance of the vehicle. Do not rely in any way on the components of this product to protect against injury or death in the event of an accident. To reduce the risk of serious injury or proper-ty damage, please read all safety messages and understand all instructions and procedure notices before attempting to install or use this product.
CAUTION
Properly torque and recheck fasteners and security of step tread after 250 miles and inspect frequently. Do not use if damaged.
REQUIRED TOOLS
Parts Information
Note: spare parts such as B68, W25, W27, N19, B46, and N11 are provided with 1 PC each (included in the number of parts details).
Installation Instructions
- Step 1: Open the carton and take out the parts. Check whether the number of components is complete.
- Step 2: Remove the original bumper and prepare the parts needed to install
Step 3: Install the Shackles.
- Take out the bolts into the bumper.
- Install the bolts of the decorative plate and license bracket on step A.
Step 4: Install the Radar Probe.
Note: If the car does not have a radar probe, this step can be ignored.
Step 5 : Install the Bracket L/R.
Brackets installed successfully
Step 6 : Install the mid-bumper.
- Step 7: Install the Shackles.
FRONT BUMPER SIDE WINGS
SPECIFICATIONS
- Model: NF101A105-2A
- Material: Q235A
- Product Dimensions: 22.1 x 24 x 11.3 inch
- Package Dimensions: 34.2 x 21.1 x 10.2 inch
- Product Weight: 39.5 lbs
Thank you for purchasing the FRONT BUMPER Side Wings. Please read this manual carefully and keep it properly if you need to refer to it afterward. If you need any support or assistance, please contact us with your product model number and order number, and our support team will help you solve problems.
WARNING
This product is designed primarily to enhance the appearance of the vehicle. Do not rely in any way on the components of this product to protect against injury or death in the event of an accident. To reduce the risk of serious injury or proper-ty damage, please read all safety messages and understand all instructions and procedure notices before attempting to install or use this product.
CAUTION
- Properly torque and recheck fasteners and security of step tread after 250 miles and inspect frequently. Do not use if damaged.
Parts Information
Note
Spare parts such as B22、W19、N14、N09、B46、N11 are provided with 1PCS each (included in the number of parts details).
Installation Instructions
- Step 1: Open the carton and take out the parts. Check whether the number of components is complete.
- Step 2: Splicing the Light brackets.
- A. Take out the bolts into the decorative plate.
- B. Install the bolts of decorative plate and light brackets on step A.
- Step 3: Install the 4 LED.
- You can connect the 4 inch Led light wiring harness to the headlight DRLs or fog light wiring. but my suggestion is to connect to the fog lights for on/off control!
- Step 4: Install the Side Wings.
- Step 5: Install the Radar Probe.
- Note: If the car does not have a radar probe, this step can be ignored.
FRONT BUMPER BULL BAR
SPECIFICATION
- Model: NF101A105-3A
- Material: Q235A
- Product Dimensions: 48.3 x 7.6 x 7.6 inch
- Package Dimensions: 5.5 x 5.9 x 33.5 inch
- Product Weight: 8.8 lbs
Thank you for purchasing the FRONT BUMPER BULL BAR. Please read this manual carefully and keep it properly if you need to refer to it afterward. If you need any support or assistance, please contact us with your product model number and order number, and our support team will help you solve problems.
WARNING
This product is designed primarily to enhance the appearance of the vehicle. Do not rely in any way on the components of this product to protect against injury or death in the event of an accident. To reduce the risk of serious injury or proper-ty damage, please read all safety messages and understand all instructions and procedure notices before attempting to install or use this product.
CAUTION
Properly torque and recheck fasteners and security of step tread after 250 miles and inspect frequently. Do not use if damaged.
REQUIRED TOOLS
Parts Information
Note: spare parts such as B22 and N14 are provided with 1PCS each (included in the number of parts details).
Installation Instructions
- Step 1: Open the carton and take out the parts. Check whether the number of components is complete.
- Step 2: Splicing the Bumper.
- Step 3: Install the Bull Bar.
