HAWKLEY NFB01A103-1A Front Bumper with Bull Bar User Manual

HAWKLEY NFB01A103-1A Front Bumper with Bull Bar

Product Information

• Product Specifications:
  • Model: NFB01A103-1A / NFB01A103-1B
  • Material: Q235A
  • Product Dimensions: 45.6 x 12 x 8.1 inches
  • Package Dimensions: 49.6 x 15.3 x 11 inches
  • Product Weight: 71.2 lbs

Product Usage Instructions

Parts Information:

Installation Instructions:

• Step 1: Remove the original bumper and prepare the parts needed to install the bumper.
• Step 2: Install the Radar Probe.
  • Note: If the car does not have a radar probe, this step can be ignored.
  • Back of bumper:
  • Pull out the rubber stoppers.
  • Radar probe installation hole.
  • Plates must clamp the radar probe for successful installation.
• Step 3: Splice the Bumper.
  • Note: There are two options for the front bumper installation, choose one according to your personal preference.
  • Option 1: Install the bolts into the bull bar brackets at the bottom of the markets.
  • Option 2: (Add specific steps for Option 2 here).
• Step 4: Install the Bumper.

FAQs

• Q: What tools are required for installing the front bumper?
  • A: The required tools include a socket, ratchet, wrench, allen wrench, and safety glasses.
• Q: Can I skip installing the Radar Probe if my car does not have one?
  • A: Yes, if your car does not have a radar probe, you can ignore that step in the installation instructions.

Different Models

Specifications

• Model: NFB01A103-1A /NFB01A103-1B
• Material: Q235A
• Product Dimensions: 45.6 x 12x 8.1 inch
• Package Dimensions: 49.6 x 15.3 x 11 inch
• Product Weight: 71.2 lbs

Introduction

Thank you for purchasing the FRONT BUMPER. Please read this manual carefully and keep it properly if you need to refer to it afterwards. If you need any support or assistance, please contact us with your product model number and order number, and our support team will help you solve your problems.

WARNING

• This product is designed primarily to enhance the appearance of the vehicle.
• Do not rely in any way on the components of this product to protect against injury or death in the event of an accident.
• To reduce the risk of serious injury or property damage, please read all safety messages and understand all instructions and procedure notices before attempting to install or use this product.

CAUTION

• Properly torque and recheck fasteners and security of step tread after 250 miles and inspect frequently.
• Do not use if damaged.

REQUIRED TOOLS

Parts Information

Note: spare parts such as B43、W33、W32、N26、W21、B12、N14、 W19、B46、M01 and N11 are provided with 1PCS each (included in the number of parts details).

Installation Instructions

Note: This installation manual takes one of the models as an example..

• Step 1: Open the carton and take out the parts. Check whether the number of components is complete.
• Step 2: Remove the original bumper and prepare the parts needed to install the bumper.
• Step 3: Install the Radar Probe.
  • Note： If the car does not have a radar probe, this step can be ignored.
• Step 4: Splicing the Bumper.
  • Note: There are two options for the front bumper installation, choose one according to your personal preference.
  • Install the bolts into the ②bull bar brackets.
  • The bottom of the market
  • Option 1.****

• *  **Option 2.**

• Step 5: Install the Bumper.

The Front Bumper is installed.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>