Adexa ADX996Z Professional Gas Range Instruction Manual
- June 1, 2024
- Adexa
Table of Contents
ADX996Z Professional Gas Range
“`html
Specifications:
- Model: ADX-996Z
- Material: 201# stainless steel
- Gas Type: LPG
- Gas Pressure: 2800 Pa
Product Usage Instructions:
Introduction:
Before operating the 6-Burner Gas Range with Gas Oven, ensure
that your mains gas fuel matches the appliance’s requirements.
Place the unit on a dry, level surface with good ventilation and an
ambient temperature not exceeding 50 degrees Celsius. Keep
combustible or explosive objects away from the appliance.
Operating Instructions for 6-Burner Gas Stove:
-
Place the unit horizontally on the floor securely. Check the
gas pipeline connection. -
This unit supports liquid gas as fuel and requires a
low-pressure controlling valve. -
Turn on the gas controlling valve of the cylinder and press
down the switch knob in front of the…
Operating Instructions for Gas Oven:
[Instructions for operating the gas oven can be added here]
Precautions:
- Only use low-pressure valves; do not use high-pressure or
middle pressure valves.
Repairs and Maintenance:
[Information on repairs and maintenance can be added here]
Warranty:
[Details on warranty terms and conditions can be added here]
FAQ:
Q: Can this gas range be used with natural gas instead of
LPG?
A: No, this gas range is designed for use with LPG only and
should not be used with natural gas.
Q: What should I do if I suspect a gas leak?
A: If you suspect a gas leak, turn off the gas supply
immediately, ventilate the area, and contact a professional gas
technician for assistance.
“`
Instruction Manual
6-BURNER GAS RANGE WITH GAS OVEN
MANUAL INSTRUCTIONS
1
Instruction Manual
MODEL ADX-996Z
MATERIAL 201# stainless steel
MACHINE SIZE L1200×D900×H920mm
GAS TYPE LPG
GAS STOVE
GAS PRESSURE 2800 Pa
CONSUMPTION 0.52m³/H
GAS TYPE LPG
GAS OVEN
GAS PRESSURE 2800 Pa
CONSUMPTION 0.16m³/H
Only use for low pressure valve
It is forbidden to use the high-pressure or middle pressure valve
2
Instruction Manual
INTRODUCTION:
This GAS RANGE WITH 6-BURNER WITH GAS OVEN is a new style product specially
designed for OUR COMPANY. All components of the product are supplied by
reliable manufacturers, to ensure quality and high level of safety and low
energy consumption. Moreover, the machine has a feature which can be easily
operated. Boasting full features and high quality, this machine is the best
product available in the market today that are being used by supermarkets,
bars, western food restaurants, and fast food canteen.
OPERATING INSTRUCTIONS:
Before operation, check that your mains gas fuel corresponds to that stated on
the appliance. Place this unit on a dry, level surface. No combustible or
explosive objects can be placed in its vicinity. The operation space must have
good ventilation, with the ambient temperature not higher than 50.
THE OPERATION OF 6-BURNER GAS STOVE:
1. Place the unit horizontally on the floor firmly. Check if the gas pipeline
is properly connected. 2. This kind of the unit only supports liquid gas as
fuel and low-pressure controlling valve. 3. Turn on the gas controlling valve
of the cylinder; Press down the switch knob in front of the
furnace forcedly and turn it anti-clockwise slowly until you listen “PANG”,
then leave hold of the switch knob. 4. You can adjust the fire of the
chargrill when turn the switch knob anti-clockwise. 5. The gas valve imported
from Italian which has electronic ignition and flame failure protection. When
the fire suddenly went out, it will automatically cut off the gas source. 6.
The fire is max when the switch is at the angle of 90, the fire become smaller
gradually when the angle is more than 90 or less than 90. 7. If the unit has
not been used for long time or is used for the first time, it may be difficult
to light up the fire for one click because there is some air in the intake
pipeline. You should click 3-4 times to light up the fire. 8. When you finish
cooking, you should turn off the switch. Press the switch knob and turn it
clockwise until you listen “DING”. After that, you should turn off the
controlling valve of the cylinder to cut off the gas source
3
Instruction Manual
The operation of the gas oven :
1. Check if the gas pipeline is properly connected to the gas cylinder. 2.
Make sure the batteries are installed on the pulses ignitor. 3. Turn on the
gas controlling valve of the cylinder. 4. Place the Red Point of the
thermostat knob to the START, then press the Pulses Ignitor. You will hear ”
PANG PANG ” when the Pulses Ignitor starts working. 5. One hand press the
Pulses Ignitor, another hand control the thermostat knob. You can leave hold
of the Pulses Ignitor and thermostat knob when you can see the fire flame
through the perspective hole. 6. Turn the thermostat knob clockwise to set the
needed temperature. When the temperature reaches to the setting value, the
thermostat will automatically disconnect the power supply. When the
temperature drops a little, the thermostat will automatically re-connect the
power supply. This process will repeat over and over again, maintaining the
temperature within the setting range. 7. If the machine has not been used for
long time or is used for the first time, it may be difficult to light up for
one click because there is some air in the intake pipeline. You should click
3-4 times to light up the fire. 8. When you finish cooking, you should turn
the thermostat knob anti-clockwise, place the Red Point to the END, then the
flame goes out. After that, you should turn off the controlling valve of the
cylinder to cut off the gad source.
4
Instruction Manual
PRECAUTIONS:
DO NOT touch the heated plates or the surface of the hot walls directly with
your hand when the unit is in use to avoid scald or injury. Keep away from
children when in use, no other person other than the user shall be operating
the unit. The manufacturer will not be liable for any damage or injury for
improper use. When the unit is not being used, turn off the valve to avoid
accidents. All care and maintenance shall be conducted with power
disconnected. In case problem come out, DO NOT disassemble the unit by you.
You must contact your dealer or authorized service center.
REPAIRS AND MAINTENANCE:
Always turn off the valve and let it completely cool down before cleaning. It
shall be cleaned with a soft and dry piece of cloth, or with neutral detergent
when necessary. Avoid scratching the surface of the unit with sharp metal. The
unit shall not be cleaned with a water jet or be immersed in water for
cleaning. If the unit will not be used for long period of time, it must be
cleaned and stored in a place with good ventilation and without corrosive gas.
When temporary storage is needed, proper rainproof measures shall be taken.
WARRANTY
1. All products manufactured and sold by OUR COMPANY are warranted to be free
from defects in material and workmanship for one year from the date of
purchase, unless specified otherwise. Notice of claims under this warranty
must be received in writing by OUR COMPANY in timely manner in order for
warranty coverage of parts to apply.
2. BENCH WARRANTY. Defective equipment or parts must be sent freight prepaid
to OUR COMPANY for evaluation. If warranty applies, defective equipment or
parts will be repaired and replaced for free and reshipped from our warehouse.
OUR COMPANY cannot warrant products returned to our premises not properly
packaged, causing additional damage. In no event shall OUR COMPANY be liable
for loss of use, profit or revenue for indirect consequential damages.
3. In the event that we need the services of the authorized third party
technician, they will visit your location and perform the initial evaluation.
To proceed with the repair, they should notify us by phone or by fax and wait
for our approval. We will not be responsible for repair cost (labor and
materials) if this step is not followed.
4. Our warranty does not apply to: Misuse or abuse of the machines, willful
or accidental damage, overloading, improper storage or any other cause
unrelated to OUR COMPANY. Normal wear and tear such as: blades, discs, cutting
knives, etc. Damages occurred during shipment.
5