SUPERATV RZR XP 4 1000 Rear Cargo Seat Conversion Kit Instruction Manual
- June 3, 2024
- SUPERATV
Table of Contents
2753 Michigan Road • Madison, Indiana 47250
•855-743-3427
INSTALLATION INSTRUCTIONS
Rear Cargo Seat Conversion Kit
for Polaris RZR XP® 4 1000
RZR XP 4 1000 Rear Cargo Seat Conversion Kit
Do not discard packaging until product has been successfully installed.
(Passenger side installation shown)
Liability Statement
SuperATV’s® products are designed to best fit user’s ATV/UTV under stock
conditions. Adding, modifying, or fabricating any factory or aftermarket parts
will void any warranty provided by SuperATV® and is not recommended.
SuperATV’s® products could interfere with other aftermarket accessories. If
the user has aftermarket products on the machine, contact SuperATV® to verify
that they will work together.
Although SuperATV® has thousands of satisfied customers, the user should be
aware that installing lift kits, long travel, or suspension kits, tires, etc.
will change the ride of the machine and may increase maintenance and part
wear. Operating any off-road machine while, or after, consuming alcohol and/or
drugs increases the risk of bodily harm or death. No warranty or
representation is made as to this product’s ability to protect users from
severe injury or death. SuperATV® urges operators and occupants to wear a
helmet and appropriate riding gear at all times.
By purchasing and installing SuperATV® products, the user agrees that should
damage occur, SuperATV® will not be held responsible for loss of time, use,
labor fees, replacement parts, or freight charges. SuperATV®, nor any 3rd
party, will not be held responsible for any direct, indirect, incidental,
special, or consequential damages that result from any product purchased from
SuperATV®. The total liability of the seller to the user for all damages,
losses, and causes of action, if any, shall not exceed the total purchase
price paid for the product that gave rise to the claim. SuperATV® will
warranty only parts provided by SuperATV®. Any damage or problems with OEM
housings, bearings, seals, or other manufacturers’ products will not be
covered by SuperATV®. SuperATV® parts and products are not warranted if the
item was not installed properly, misused, or modified.
Installing, adding, modifying, or fabricating any factory or aftermarket
product to your ATV/UTV may violate certain local, state, and federal laws. Be
advised that laws vary
depending on town, city, county, state, etc. Use of certain products on public
streets, roads, or highways may be in violation law. The Buyer is solely and
exclusively legally and
personally responsible for any violation of the law by the installation or use
of the product. You must abide by all local, state, and federal laws,
including but not limited to vehicle safety, traffic laws, and ordinances. It
is your responsibility to know the laws and how they apply to you.
The Buyer is responsible to fully understand the capability and limitations of
his/her vehicle according to manufacturer specifications, warnings and
instructions and agrees to
hold SuperATV® harmless from any damage resulting from failure to adhere to
such specifications, warnings, and/ or instructions. The Buyer is also
responsible to obey all
applicable federal, state, and local laws and ordinances when operating
his/her vehicle while using this product, and the Buyer agrees to hold
SuperATV® violation thereof.
harmless from any
– Remove Right Rear Seat.
– Remove the Seat Base from the Seat.
– Install stock Seat Base to previously installed M10 x 55mm Bolts.
– Secure Brackets and Seat Base with hardware shown.
– Tighten all hardware.
– Install to the machine.
Read instructions and view illustrations before beginning.
Thank You For Choosing
Need help with your installation?
sales@superatv.com
www.superatv.com
1-855-743-3427
8:00am – 8:00pm EST M-Th
8:00am – 7:00pm EST Friday
9:00am – 2:00pm EST Saturday