ICPDAS-EUROPE I-7550-M PROFIBUS Gateway and Converter Series User Guide
- June 10, 2024
- ICPDAS-EUROPE
Table of Contents
PROFIBUS Gateway & Converter Series Quick Start
v1.1, Dec 2022
Packing List
In addition to this guide, the package includes the following items:
| | |
---|---|---|---
PROFIBUS gateway/converter module
All PROFIBUS
gateway/ Converter| Screw Driver
I-7550-M
I-7550E-M
GW-7552-M
GW-7553-M
GW-7553-CPM-M
GW-7557-M| RS-232 Cable
(CA-0910)
All PROFIBUS
gateway/ Converter| Plastic Rail
I-7550-B
I-7550E
GW-7552-B
GW-7553-B
GW-7553-CPM
GW-7557
Resources
How to search for drivers, manuals and spec information on ICP DAS website.
Hardware configuration (PROFIBUS connection)
Here we recommend users to use the standard PROFIBUS cable and connector (DB9
male). It is only needed to use D-type connector via PROFIBUS cable to connect
PROFIBUS Master station and PROFIBUS series module. PROFIBUS Master station
and PROFIBUS series module belong to terminal equipments in this example, thus
we
need to enable the terminator resistor in the D-type connector.
PROFIBUS station address setting
PROFIBUS series module is a slave device of PROFIBUS DP protocol.
The station address of PROFIBUS series module can be set by DIP switch or
rotary switch. The range of PROFIBUS station address is 0~126.
DIP Switch
The DIP switch can be seen by open the cover, as shown in the below.
Technical Support
service@icpdas.com
www.icpdas.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>