garth Fascia Set Replacement Instructions
- June 13, 2024
- garth
Table of Contents
garth Fascia Set Replacement
Product Information
The product is a fascia set replacement for a specific model. The fascia set includes the panel, knobs, knob bezel, and other necessary components to replace the existing fascia of the product.
Product Usage Instructions
How to replace the fascia Set
- Pull out the side burner ignition wire.
- Take out the three bolts on either side of the side burner shelf as shown.
- Loosen the front fixing screws 3mm on either side of the side burner shelf, as shown.
- Fold open the left side table.
- Take out the three screws on the left side shelf, as shown below.
- Loosen the front fixing screws 3mm on the left side shelf, as shown below.
- Fold open the left side table.
- Loosen the two sets of screws in the sides of the panel.
- Take out all the knobs.
- Remove all screws from the knob bezel.
- Loosen the set screws at the back of the panel.
- Remove the panel.
Follow these steps carefully to replace the fascia set of your product. Make sure to disconnect any wires or electrical connections before starting the replacement process. Use appropriate tools, such as a screwdriver, to perform the necessary actions. Refer to the illustrations in the user manual for a better understanding of each step. If you encounter any difficulties or have any questions, please consult our customer support for further assistance.
Read User Manual Online (PDF format)
Loading......