Adexa VG Series Vapour Grill Installation Guide

Adexa VG Series Vapour Grill Installation

User and Installation Manual Benutzer- und Instalationshandbuch

• VAPOUR GRILL -VG1270GT
• VG4070GT Vapour Grill 40x70x36cm
• VG8070GT Vapour Grill 80x70x36cm
• VG12070GT Vapour Grill 120x70x36cm

To avoid the risk of accidents or damage to the appliance it is essential to read these operating instructions before it is installed or used for the first time.
Vor dem Aufbau, Anschluss und Erstgebrauch Ihrer Maschine bitte lesen Sie unbedingt die Bedienungsanleitung. So können Sie jegliche Schäden an sich selbst und an Ihrem Gerät vermeiden

Transportation and Storage

• If you need to transport the equipment, then move it in its original container and comply with the movement marks on the container.
• If the original container of the equipment is not available, fix the moving parts by using tape against their playing their places during transportation.
• Take necessary protective measures against possible strokes to Heater Mechanism On/Off Knobs and other surfaces. Do not put any load on the appliance heavier than its own weight.
• Keep the product in normal position during movement.
• If the equipment shall not be used or kept for sale for extended time, store it indoor in dry, dust- and damp-free conditions.

First Cleaning and First Heating

• Before first operation, remove nylon film on your equipment and wipe inner and outer parts with a damp cloth and then wipe dry.
• Do not use detergent for wiping operation.
• A temporary odour and smoke may occur at the heated parts of your equipment during first heating.
• Odour and any possible smoke shall disappear soon. Odour and smoke do not indicate incorrect connection or defective equipment.

Erste Reinigung und erstes Aufheizen

• Vor Erstgebrauch entfernen Sie die Schutzfolie des Gerätes und reinigen Sie alle Innen- und Außenflächen mit einem feuchten Lappen und trocknen Sie es hinterher mit einem trockenen Tuch.
• Benutzen Sie keine chemischen Reinigungsmittel zur Reinigung des Gerätes.
• In den Heizern des Gerätes kann beim Erstgebrauch Geruch und Rauch entstehen.
• Geruch und Rauch werden nach kurzer Zeit verschwinden. Der auftretende Geruch und Rauch zeigt nicht dass das Gerät falsch angeschlossen wurde oder defekt ist.

Operation

• Ensure that gas connection of the appliance is done in accordance with valid standards and regulations.
• Particularly while using LPG Gas, ensure that any other gas valve is not assembled other than a valve having features specified for the appliance.
• Caution: Operating gas pressure of the appliance is given on the label of appliance.
• There is a risk of gas leakage when operating in higher pressure.

Verwendung

• Vergewissern Sie sich, dass der Gasanschluss des Gerätes unter Beachtung der geltenden Standards und gesetzlichen Bestimmungen durchgeführt wurde.
• Achtung: Der Betriebsgasdruck des Gerätes ist auf dem Ettiket das sich auf dem Gerät befindet angegeben.
• Bei Betrieb mit höherem Gasdruck besteht Ausströmungsgefahr

Technical Features – Technische Daten

ART.NR.| COMMODITY| Gas Consumption Propane NaturalGas| Power| Dimension WDH| Net Weight- kg| Max. Load kg
---|---|---|---|---|---|---
VG4070GT| Vapour Grill| 0,80 kg/h 1,01 m3/h| 10,6 kW| 40x70x36cm| 40| 20
VG8070GT| Vapour Grill| 1,61 kg/h 2,03 m3/h| 21,3 kW| 80x70x36cm| 80| 45
VG1270GT| Vapour Grill| 2,42 kg/h     3,06 m3/h| 32 kW| 120x70x36cm| 120| 60

Working principle appliance

The appliance is heated by natural gas or LPG, and in case flame on heating elements is out due to any reason, there are safety thermocouples switching off gas automatically.

Allgemeines Funkitonsprinzip des Gerätes

Das Gerät kann mit Erdgas oder LPG Gas betrieben werden. Sollte die Flamme des Brenners aus jeglichem Grund erlöschen ist das Gerät mit einem Sicherheitselement ausgestattet das die Gaszufuhr automatisch stoppt.

Safety Recommendations and Advices

These instructions are only valid if country code seen on appliance. If country code does not exist on appliance, please refer to valid technical documents in order to arrange appliance in accordance with the technical requirements of the country of use.

Mounting and Connection

• Before installation of your appliance, make sure that there is no visible damage. Do not install or use any damaged appliance.
• Before gas connection of the appliance, check if local gas distribution requirements (type and pressure of the gas) and adjustment of the appliance are appropriate.
• Ensure that gas connection of the appliance is done in accordance with valid standards and regulations
• Connect your appliance to LPG tube or Natural Gas supply valve as close as possible and connection must be leak-proof.
• While checking gas leakage, make sure if the buttons of appliance are set to “off” position and the tube (or natural gas supply line) is on position. To check the gas leakage, cover connector of the hose with foam.
• If a gas leakage is exists, bubbles shall occur. Check gas leakage again.
• While checking gas leakage, never use fire.
• Particularly while using LPG Gas, ensure that any other relief valve is not assembled other than a relief valve having features specified for the appliance.
• Should be take care to ensure that the cooking zone, the pan of the appliance is cleaned and the oil drawer has been emptied before switching to heating to protect the appliance from the risk of fire.

Sicherheitsempfehlungen und Hinweise

Diese Anweisungen sind nur gültig wenn auf dem Gerät der Landeskode zu sehen ist. Ist dieser nicht vermerkt wenden Sie bitte die technischen Bestimmungen und Regeln des Landes in dem das Gerät aufgebaut wird an.

Cleaning and Maintenance

• Ensure that all valves are off. If possible, turn off the main gas valve, connected to inlet of the appliance.
• Allow the appliance to cool down before you start cleaning.
• Clean any rough dirt by use of a cloth.
• Clean by use of a warm soapy cloth.
• Never use steam and water pressured cleaning instrument to clean the appliance. The manufacturing firm is not responsible for any resulting damages.
• Do not use cleaning agents such as stain remover and anti-corrosive agent that have abrasive effects and sponges with hard surface.
• After each wet cleaning operation, wipe your appliance dry with a clean cloth definitely.
• Never use chemicals or steel cleaning materials. Wipe any dirt immediately.Long-remaining dirt may give damage to the surface.
• Clean your appliance regularly, if possible, after each grilling process.

Appliance should be repaired only by Authorized Service Center. Any improper repair operations to be performed by non-authorized service people may cause risk for the user.

Warning sign

• Warning
• Hot
• Glove
• Upwards
• Fragile
• Protect from humidity

Safety Recommendations and Advices

• Plate and adjoining areas get hot during use and remain so for a certain time after switching off. Consequently, the place for using the appliance should not be accessible by customers and children, except for the user.
• Burning risk! While using your appliance, protect your hands with heat-resistant gloves. Additionally, make sure that they are not wet or damp, as dampness and wetness increase the heat conductance of the gloves. Your hands may burn.

In Case of Trouble

• When you determine a defect in the appliance, turn off LPG tube or Natural Gas Valve and contact the Customer Services.Observe not to do gas connection until repair of the appliance shall be completed.
• All repair operations should be performed by Authorized Service Center. Any repairs to be performed by persons other than Authorized Service Centers may cause personal injury and appliance damage. Repairs should be performed by ADEXA Authorized Service Centre during warranty period. Otherwise, repair of troubles that may subsequently occur shall not be covered by the warranty.

Things to be done before First Operation

Preliminary Information

• Keep Operation Manual and give it to the next owner of the appliance after you.
• Control the appliance before installation for any visible damages. Do not install or use any damaged appliance

Packaging

• Packaging protects the appliance against possible damages during transportation. This packaging has been made of recycled material. That the packaging material is made of recycled material both ensures saving on raw material and reduces quantity of waste. If you want to dispose the packaging material yourself, please call the nearest recycling center

Working principle of th Safety Recommendations and Advices

• Defective parts may only be replaced by original spare parts. We as manufacturer may only assure you that you shall operate your appliance with these parts completely in safe.
• The manufacturing firm is not responsible for any damages that may be caused by improper mounting or connection of the appliance

Rules of Operation

• Please read carefully the Operation Manual before first operation. Thus you shall both protect yourself and prevent the appliance from being damaged.
• Use the appliance only in mounted state.
• Use the appliance only under a hood and on a flat surface. The distance between the hood and appliance must comply with the valid local fire and safety regulations in order to get sufficient air ventilation.
• Please bear in mind that if some other appliances used at the same time at the same place together with this appliance, negative effects such as heat, fat, vapour etc. caused by other appliances may result in breaking warranty of the appliance.
• The appliance must be used by only trained personnel who already read these installation-operating.
  The manufacturing firm is not responsible for any defect or damage arising from use of the appliance for any other purpose.

Protecting Appliance against Damage

• While installing the appliance, protect Heater Mechanism On-Off Knobs
• from any possible strokes.
• Caution: Since surface of griddle is hot, there is a risk of burning!
• Clean these parts after they are cool down.
• Prevent any metal and similar parts entering into the ventilating openings on the appliance body as they may give damage to the gas fittings.
• Caution: Operating gas pressure of the appliance is given on the label of appliance. There is a risk of gas leakage when operating in higher pressure.
• Immediately clean any dirt that may occur on the surfaces of the appliance to prevent them from burning and sticking on the surface.
• Never use pressure water and steam cleaning tools. Such cleaning materials may give damage to the appliance.
• When moving the appliance, wrap it up with folio for protection against dust.

Operation

• Turn “On-Off “ knob to “spark sign and burn it with a lighter.
• When cooking is completed, turn “On-Off “ key to “off ” position.
• When the appliance is not used for a long time, turn On-Off key to “off” position

Troubleshooting

Problem – Defekt| Possible Cause – Mögliche Gründe| Solution – Lösung
---|---|---

• Appliance does not

| * Inlet Valve connected to inlet of the appliance is closed.|

• Open the Inlet Valve

heat or burners do not operate| Falls möglich schließen Sie das Zuleitungsventil zum Gerät.| Öffnen Sie den Gas-Zulauf

• Das Gerät heizt nicht auf

oder das Gas-

Zufuhrventil

des Gerätes ist

geschlossen.

|

*  Burner is out of order

Burner Gas Supply Valve is out of order

*  Der Brenner kann defekt sein

*  Das Gas-Versorgungsventil kann defekt sein

|

*  Please contact our Customer Service Team.

*  Kontaktieren Sie unser Kundenservice- Team

Technical Features

• Gas connections of the appliance must be made by qualified gas technician. This gas technician should be aware of rules and additional sanctions imposed by local power distribution companies in your country and must strictly observe such rules and additional sanctions.
• Caution: Operating gas pressure of the appliance is given on the label of appliance. There is a risk of gas leakage when operating in higher pressure.
• Gas connection of the appliance must be made by authorized and qualified person in accordance with valid standards and regulations

WARRANTY

The appliance is guaranteed for 1 (ONE) year from the date of delivery of the appliance against defects in production, workmanship and assembling only if appliance is used in accordance with the instructions written in user manual and repaired only by a service person authorized by ADEXA This guarantee is only valid if all the instructions, obligation and responsibility written for user in user manual and this form followed by user. Our company is free to choose the repair methods to be applied and determination of replacement parts. Repair places are authorized service workshops or our factory. Guarantee procedures only starts after reporting of fault and deliver the product to these repair places. All transport, cargo, and related expenses occur when sending the appliance to our authorized service workshops or to our factory for repair and from our authorized service workshops or factory to customer after the necessary repairs and also possible damage that may occur during shipping have to be covered by the customer.

1. This warranty does not cover damage arising for misuse of the appliance as well as following points;
2. This warranty does not cover damage arising because of user mistakes.
3. This warranty does not cover damage arising during transportation, installation or while moving the Product or to any transportation costs of the Product or any parts thereof to and from the owner, unless otherwise specified in these warranty conditions.
4. The warranty will not apply if damage, malfunction or failure resulting from fire or thunderstorm activity,
5. The warranty will not apply if damage, malfunction or failure resulting from alterations, accident, misuse, abuse, damaging synthetic chemical liquid spillage, improper installation or operation, lack of reasonable care, loss of parts, tampering or attempted repair by a person not authorized by ADEXA
6. The warranty does not cover normal wear of the Product or parts and the parts that could be used as spare parts. 7. The warranty will not apply if damage, malfunction or failure resulting from use against the instructions written in user manual and repaired only by a service person authorized by ADEXA

The warranty will not apply if the factory-applied serial number has been altered or removed from the Product. The responsibility of perfection and giving the warranty to customer belongs to seller, dealer or agent who sells the appliance to the customer.

Delivery Date, Place: Address: Date Invoice No: Seller Company Name: Phone- Fax: Seller Company (Stamp and Signature):

Customer Services

Service operation is performed at the plant facility

Service Centre Address

ADEXA DIRECT LIMITED GROUND FLOOR, UNIT 1 JAYCEE HOUSE 214 PURLEY WAY. CROYDON, CRO 4XG.UK. Tel : 01483 931040 e-mail : service@adexa.co.ukwww.adexa.co.uk

References

• Adexa Direct | UK's Leading Supplier of Catering & Kitchen Equipment

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>