SpeaKa PROFESSIONAL 2489355 Height Adjustable Standing Desk Instruction Manual
- July 24, 2024
- Speaka PROFESSIONAL
Table of Contents
SpeaKa PROFESSIONAL 2489355 Height Adjustable Standing Desk
Specifications
- Model Number: SP-SSW-300
- Output Voltage/Current: 25 V/DC, 4 A
- Short-term operation: 2 minutes ON / 18 minutes OFF
- Dimensions (W x H x D): 800 x 780 – 1280 x 600 mm
Product Usage Instructions
Intended Use
This product is an electrically adjustable desk. The desk frame can be adjusted in height electrically, enhancing ergonomics during work or play and aiding in preventing back issues. Height adjustment is controlled by a keyboard attached to the frame.
FAQ
- Q: Can the desk be used outdoors?
- A : No, the product is intended for indoor use only to prevent damage from moisture exposure.
- Q : How do I dispose of the product?
- A : Follow local regulations for proper disposal methods to ensure environmental safety.
- Q : What should I do if the desk is not functioning correctly?
- A : Do not use the product and seek assistance from authorized service personnel for repairs.
Important information
Item no. 2489355
Intended use
The product is a height-adjustable electric desk. The height can be adjusted
using the keyboard, which is attached to the frame. This product is intended
for indoor use only. Do not use it outdoors. Contact with moisture must be
avoided at all costs.
For safety and approval purposes, do not rebuild and/or modify this product.
Using the product for purposes other than those described above may damage the
product. In addition, improper use can cause hazards such as a short circuit,
fire or electric shock. Read through this important information carefully and
keep it in a safe place. Only pass on this product to third parties together
with this important information. This product complies with statutory,
national and European regulations. All company and product names are
trademarks of their respective owners. All rights reserved.
Important safety information
- This appliance may only be used by children over 8 years of age and people with reduced physical, sensory or mental capabilities if they have been given
- supervision or instruction concerning the safe use ofthe appliance and understanding the potential hazards.
- Children must always be supervised by an adult to ensure that they do not play with the appliance.
- Children must not clean or service the appliance without appropriate supervision.
- Only power the product using the mains adapter provided.
General safety information
Read this important information and the manufacturer’s instructions carefully
and pay special attention to the safety instructions. If you do not follow the
safety instructions and information on proper handling in the manufacturer’s
instructions, we will assume no liability for any resulting personal injury or
damage to property. Such cases will invalidate the warranty/guarantee
The product is not a toy. Keep out of the reach of children and pets.
- Do not leave packaging material lying around carelessly. It may become a dangerous plaything for children.
- Protect the product from extreme temperatures, direct sunlight, strong jolts, high humidity, moisture, flammable gases, vapors, and solvents.
- Never expose the product to mechanical stress.
- If it is no longer possible to operate the product safely, take it out of operation and protect it from any accidental use. A safe operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to serious transport-related stresses.
- Please handle the product carefully. Jolts, impacts or a fall even from a low height may damage theproduct
- Check the contents of the packaging before assembling the product. Do not assemble the product if any parts are missing.
- A second person must assist with the installation of this product.
- The improperly selected installation site can cause personal injury or property damage!
- Proceed with care when assembling and mounting the product! The product has some sharp edges and there is a risk of injury!
- Only carry out the work necessary to mount (or adjust) the product. Never attempt to dismantle, convert or repair the product. Some products contain heavily pre-loaded metal springs. In case of improperdisassembly, there is a risk of serious injuries!
- Carry out the assembly very conscientiously, as components falling down or overturning can lead to both expensive consequential damage, and to a risk of injury!
- Place the product on a stable, leveled, and horizontal surface.
- In case of doubt, do not perform the installation yourself; leave it to a professional.
- Lay all cables so that they are not jammed or bent in the product.
- Occasionally check all screw fasteners including any retaining clips. As a result of adjustment and movement, the screw fasteners can eventually loosen over time.
- Do not use force when moving/adjusting, as this can damage the moving components.
- When moving/adjusting, do not press on the surface (e.g. desktop) of the moving component!
- Never overload the product. Pay attention to the manufacturer’s information about the maximum weight.
- Do not use the product to support yourself.
- Do not place any objects (including cables) near the moving components (including electrical lifting equipment) as this may damage the product.
- Warning: Pay attention to your hands and other parts of your body.
- The mains socket must be located near to the device and be easily accessible.
- Only connect the power adapter to a standard mains socket connected to the public grid. Before plugging in the power adapter, check whether the voltage stated on the power adapter complies with the voltage of your electricity supplier.
- Never connect or disconnect power adapters if your hands are wet.
- Never unplug the mains adapter from the mains socket by pulling on the cable; always use the grips on the plug.
- When setting up the product, make sure that the cables are not pinched, kinked, or damaged by sharp edges.
- Always lay the cables so that nobody can trip over or become entangled in them. This poses a risk of injury.
- For safety reasons, disconnect the power adapter from the main socket during storms.
- Do not touch the mains adapter if there are any signs of damage, as this may cause a fatal electric shock! Switch off the mains voltage to the socket containing the power adapter (switch off at the corresponding circuit breaker or remove the safety fuse, and then switch off at the corresponding RCD protective switch). You can then unplug the mains adapter from the mains socket. Dispose of the faulty mains adapter in an environmentally friendly manner and discontinue use. Replace it with a power adapter of the same design.
- Never pour liquids over electrical devices or place objects filled with liquid next to the device. If liquid or an object gets into the device, power down the respective mains socket (e.g. switch off the circuit breaker), and then pull the mains plug from the mains socket. Discontinue use and take the product to a specialist repair center.
- If your product is intended for short-term use, observe the operating and pause times as indicated on the nameplate and in the technical data.
- Trained personnel must supervise the use of electrical appliances in schools, training facilities and DIY workshops.
- On commercial premises, the relevant accident prevention regulations for electrical equipment must be complied with.
- Consult a technician if you are not sure how to use or connect the product, or if you have concerns about safety.
- Maintenance, modifications, and repairs must only be carried out by a technician or a specialist repair center.
- If you have any questions that are not answered in this important information, please contact our technical customer service or other professionals
Declaration of Conformity (DOC)
Conrad Electronic SE, Klaus-Conrad-Straße 1, D-92240 Hirschau hereby declares
that this product is (are) in conformity with the following directives, norms,
and/or regulations.
Model number: SP-SSW-300
MD directive 2006/42/EC
- EN 60335-1:2012 + A11:2014 + A13:2017 + A14:2019 + A1:2019 + A2:2019
- EN 62233:2008
- EMC directive 2014/30/EU
- EN 55014-1:2017+A11:2020 EN 55014-2:2015
- EN IEC 61000-3-2:2019 EN 61000-3-3:2013+A1:2019
Click on the following link to read the full text of the EU Declaration of Conformity: www.conrad.com/downloads . Enter the product item number in the search box. You can then download the EU Declaration of Conformity in the available languages
Disposal
This symbol must appear on any electrical and electronic equipment placed on the EU market. This symbol indicates that this device should not be disposed of as unsorted municipal waste at the end of its service life.
- Owners of WEEE (Waste from Electrical and Electronic Equipment) shall dispose of it separately from unsorted municipal waste. Spent batteries and accumulators, which are not enclosed by the WEEE, as well as lamps that can be removed from the WEEE in a non-destructive manner, must be removed by end users from the WEEE in a non-destructive manner before it is handed over to a collection point.
- Distributors of electrical and electronic equipment are legally obliged to provide free take-back of waste. Conrad provides the following return options free of charge (more details on our website):
- in our Conrad offices
- at the Conrad collection points
- at the collection points of public waste management authorities or the collection points set up bymanufacturers or distributors within the meaning of the ElektroG
- End users are responsible for deleting personal data from the WEEE to be disposed of.
- It should be noted that different obligations about the return or recycling of WEEE may apply in countries outside of Germany
Safety-relevant technical data
-
Input voltage/current…………………………100 – 240 V/AC 50/60 Hz, 1.5 A
-
Output voltage/current………………………25 V/DC, 4 A
-
Short-time operation…………………………2 minutes ON / 18 minutes OFF
-
Adjustable height range…………………….780 – 1280 mm
-
Worksurface (W x H x D)…………………..800 x 18 x 600 mm
-
Max. capacity…………………………………..40 kg
-
Power cord length…………………………….3 m
-
Operating/storage conditions…………….. 0 to +40 ºC, 20 – 85 % rF
-
Dimensions (W x H x D)……………………800 x 780 – 1280 x 600 mm
-
Weight……………………………………………approx. 17.81 kg (without accessories
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming, or capturing in electronic data processing systems) requires prior written approval from the publisher. Reprinting, also in part, is prohibited. This publication reflects the technical status at the time of printing. Copyright 2024 by Conrad Electronic SE.