BILIPALA DM9308 Weather Station User Guide
- June 17, 2024
- BILIPALA
Table of Contents
BILIPALA DM9308 Weather Station
Product Information
Specifications
- Power Source: Main Station – Batteries and Power Adapter
- Outdoor Sensors – Batteries
- Weather Icon : Changeable using DOWN or UP buttons
- Radio-controlled Signal Receiving : Supported
- Alarm Setting : Available
- Manufacturer : E-CrossStu GmbH
- Origin: China
- Distributor: EU REP E-CrossStu GmbH Mainzer Landstr.69, 60329 Frankfurt am Main
Frequently Asked Questions (FAQ)
Q: How long does it take for the Outdoor Sensors to connect to the Main
Station?
A: It may take 2-7 minutes for the Outdoor Sensors to connect to the Main
Station.
Q: How do I change the weather icon?
A: Press the DOWN or UP button to change the weather icon on the Main
Station.
Q: How can I skip setting the weather icon?
A: Press the PRESSURE button to skip setting the weather icon.
Q: How do I adjust the basic functions like time, date, time zone, and
language?
A: Press and hold the SET button for 2 seconds to enter the manual setting
mode. Use the SET button to select different functions and the UP and DOWN
buttons to adjust the values.
Q: How do I set the alarm?
A: Press the SET button to display the alarm status. Press the SET button
for 1 second to turn on the alarm. Press the SET button for 3 seconds
immediately after turning on the alarm to select the Hour. Press the SET
button to set the minute. Press the Set button to quit setting the alarm.
INSTALLATION INSTRUCTION
Step1: Power On
Install batteries in the Main Station and plug in the Power Adapter. And then,
the weather icon will blink after hearing the Beep. You can press the” DOWN
“DOWN button or” UP”UP button to change the weather icon. If you do not want
to change the weather icon, press the “PRESSURE” button to skip setting the
weather.
Step2: The Connection Between the Main Station and the Outdoor Sensors
Install batteries in three Outdoor Sensors and adjust the corresponding channels by shifting the Channel selection switch. It may take 2-7 minutes for the Outdoor Sensors to connect to the Main Station. Then, the value of humidity and temperature will appear.
Step3: Radio-controlled Signal Receiving
The Main Station will automatically search the radio-controlled signal – WWVB/DCF77 after the connection between the main station and the outdoor sensors. Then, the correct time and date will appear after being successfully signal received. If the signal reception is not successful after 7 minutes, you can move the Main Station for better signal – WWVB/DCF77 receiving. Then, press and hold the button” DOWN ” for 3 seconds so that the Main . The station start searching for signal WWVB/DCF77 again. After signal WWVB/DCF77 has been received, the time and date will appear. Or manually adjust the basic information such as time (and date refer to step 4).
Step4: Manual Setting
Press and hold the SET button for 2 seconds for to adjust each basic function
such as time, date, time zone, language, and other information. Press the
“SET” button to select different functions. The sequence of settings is as
follows: hour → minute → 12/24H→ year month→ day→ time zone → language → Exit
Use the” DOWN “ button and the ”UP ” button to select the value.
Step5: Alarm Setting
Press the SET button to display the alarm status.
Here are the steps for setting the alarm:
- Press the “SET” button for 1 second and then press the” UP “ button to turn on the alarm (if want to turn off the alarm, you can press the” DOWN ”button).
- Then press the “Set” button for 3 seconds immediately to select the Hour.
- Press the “SET” button again to set the minute.
- Finally, press the “Set” button to quit setting the alarm.
TIPS: If there is no button operation for 30 seconds, it will automatically exit the setting.
MADE IN CHINA
- E-CrossStu GmbH
- Mainzer Landstr.69, 60329 Frankfurt am Main
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>