Contractors Special 2002CS Southern Maintenance Supply Installation Guide

Special 2002CS Southern Maintenance Supply
Installation Guide

Special 2002CS Southern Maintenance Supply

| NAME| DATE| MYTEE 858-679-1191
---|---|---|---
DRAWN| M.LaBarbera| Feb-16| TITLE:
Contractors Special
CHECKED| | | SIZE
C| DWG.  NO. 2002CS| REV 2.24
COMMENTS:
PROPRIETARY AND CONFIDENTIAL THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF MYTEE LLC. ANY REPRODUCTION IN PART
OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF MYTEE LLC IS PROHIBITED.| | | SCALE: 1:48| DO NOT
SCALE DRAWING| SHEET 1 OF 5
ITEM NO.| PART NO.| DESCRIPTION| Web/ QTY.
---|---|---|---
1| H296| guard, cooling fan, wire| 2
2| H304| screw, #8 x 5/8 phil oval, s/s| 14
3| H216| nut, lock, 1/4-20, nylon insert, s/s| 10
4| H210| washer, 1/4″ flat, s/s| 19
5| H342| bolt, 1/4-20 x 1″ hex head, s/s| 8
6| H668| caster, 4″, black hub & gray tread| 2
7| H254| washer, axle, cut 1/7′ id| 10
8| H109| wheel, 10″, foam filled| 2
9| H042| c-clip, 12mm, external| 2
10| H371| axle, 18.03″ x .50″ dia| 1
11| H256| screw, 10-32 x 3/4″ phil pan head| 6
12| H273| nut, kep, #10-32 zinc| 8
13| H528| bracket, heater mounting, dual| 1
14| A907| heater, 1200wt, 115v| 1
15| AH106| sol hose, 1/4″ x 10″, 1/4″ msw x 1/4″ fpt| 1
16| 8108| valve, brass, 1/4″ check| 1
17| B207| elbow, brass, 90 deg, 1/4″ fpt x 1/4″ fpt| 1
18| B541| valve, relief, 250 psi| 1
19| B109| barb, 1/4″ barb x 1/4″ mpt| 1
20| B170| ferrule, 1/4″ brass| 2
21| PH634-27| sol hose, 1/4″, silicone braided, clear| 1
22| B110| adapter, brass, 1/4″ sw barb x 1/4″ fpt, w/gasket| 1
23| 8113| tee, 1/4″ fpt x 1/4″ fpt x 1/4″ fpt| 1
24| H221| nut, lock, 1/7′ steel, electrical| 1
25| H220| fitting, strain relief, cord| 1
26| E531| power cord, end, 25′, 12/3 black| 1
27| P731| base| 1
28| C305| pump, 120 psi, 115V| 1
29| H347| clamp, hose, 5/16-29/32| 2
30| PH615K-36| sol hose, 1/7′, polywire reinforced| 1
31| B160| adapter, brass, 1/7′ barb x 3/8″ fsw, ball end| 1
32| B186| elbow, 90 deg street, 3/8″mpt x 3/8″ fmpt| 1
33| H299| washer, 11/16″id x 1-1/2″od x .075, s/s| 3
34| B212| elbow, 90 deg, 3/8″mpt x 1/4″fpt|
35| B260A| quick disconnect, 1/4″ mqd x mpt, open-spray| 1
36| B259A| qd, brass, 1/4″ fqd x fpt| 1
37| H222| screw, 10-32 x 1-1/4″, phil pan head, s/s| 4
38| B172| elbow, brass, 90 deg, 1/2″ barb x 3/8″mpt| 1
39| H912| bracket, rear, fb/spy| 1
40| H770| bolt, 1/4-20 x 1/7′ serrated hex flange, zinc| 8
41| H307| washer, star, 1/4″ steel zinc| 2
42| H217| clamp, hose, 2-1/4 dia| 2
43| PH628-8| vac hose, 7′, wire reinforced| 1
44| H124V| CUFF-LYNX, 7′ female cuff X 7′ male thread starter cuff| 1
45| H194| coupler, 7′ dia x 3″ length, s/s| 1
46| P634| plug, 2″, 4 clips, exhaust port| 1
47| H203| bolt, 1/4-20 x 1-1/4″| 2
48| H211| washer, 1/411d x rod, flat, s/s| 6
49| G052| washer, buna 1-1/8″ od x 3/16″ id| 6
50| H213| washer, 1/4″ lock, s/s| 7
51| H215| nut, hex, 1/4-20 s/s| 2
52| G018| cover, sol tank (sp)| 1
53| P732| sol tank, speedster| 1
54| H768| bolt, 1/4-20 x 3/4″ serrated hex flange, zinc| 2
55| H485| handle, aluminum grip, black| 1
56| AH206| sol hose, 1/4″ x 48″, 1/4 msw x 1/4 mpt| 1
57| H484| plate, mounting, QD| 1
58| B102| quick disconnect, 1/4″ fqd x 1/4″ fpt| 1
59| H201| bolt, 1/4-20 x 1/7′, hex head, zinc| 2
60| H378| bracket, front hinge, sp/fb| 1
61| H316| bolt, 1/4×1-1/7′, hex head zinc| 2
62| B103| elbow, 90 deg street, 1 /4″mpt x 1/4″ fpt| 1
ITEM NO.| PART NO.| DESCRIPTION| W QTeb/
---|---|---|---
63| 11212| flat washer, 9/16″ID x 1 1/16″0D, AN960-C916| 3
64| 8107| nipple, hex, I/4″mpt x I/4″mpt| 1
65| BI 1 9A| filter, strainer, 1/2″ fpt| 1
66| 8210| bushing, brass, I/2″mpt x 3/8″ fpt, hex| 1
67| 8216| nipple, brass, 3/8″ x close| 1
68| 11225| valve, drain, 1-1/2″| 1
69| P733| vac tank, speedster| 1
70| A926| elbow, inlet assembly 7′| 1
71| P520| adapter, 1.5″ mpt pvc| 1
72| P11633-2| pipe, pvc, 1-1/2″| 2
73| P503| adapter, 1.5′ pvc, 45 deg, fslip| 2
74| P11633-7| pipe, pvc, 1-1/2″| 1
75| P502| adapter, 1.5′ pvc, fslip x fslip| 1
76| G097| filter, screen mesh, 1.90″ dia| 1
77| G022| filter, foam, 2.50″ x .50″| 1
78| 11314| nut, lock, 1-1/2″, steel| 1
79| G090| lid, vac tank, clear, 7′| 1
80| G091| gasket, 7″, vac lid| 1
81| HI35D| Cuff-Lynx, 2″ male cuff x 2″ mpt, vinyl| 1
82| 11338| plate, switch, sp, 3 hole| 1
83| 112898| washer, 10 flat, black| 3
84| 11246| screw, 8-32 x 3/8″ SHCS, alloy, Black| 2
85| E515| switch, rocker, 2 position| 3
86| 11389| screw, 10-32 x 1/2″ SHCS, alloy| 1
87| G004| gasket, vacuum motor| 1
88| 11503| vac support, 3 stage, 3.25′, no thrds| 3
89| H390A| bracket, “L”, 2″ x 2″| 2
90| 11096| bolt, hex, 1/4-20 x 4″, zinc Finish| 3
91| 11343| screw, 10 x 5/8″ hex head, zinc| 1
92| C302LA| vac motor, 3 stage, low amp| 1

ITEMS NOT SHOWN

| NAME| DATE| MYTEE 858-679-1191
---|---|---|---
DRAWN| M.LaBarbera| 2/2016| TITLE:
Contractors
Special
CHECKED| | | SIZE
C| DWG.  NO.

2002CS

| REV
2.24
COMMENTS:
PROPRIETARY AND CONFIDENTIAL THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF MYTEE LLC. ANY REPRODUCTION IN PART
OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF MYTEE LLC IS PROHIBITED.| | | SCALE: 1:48| DO NOT
SCALE DRAWING| SHEET 2 OF 5

| NAME| DATE| MYTEE 858-679-1191
---|---|---|---
DRAWN| M.LaBarbera| 2/2016| TITLE:  Contractors Special
CHECKED| | | SIZE C| DWG.  NO.  2002CS| REV 2.24
COMMENTS:
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
MYTEE LLC. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF MYTEE LLC IS PROHIBITED.| | | SCALE: 1:48| DO NOT SCALE DRAWING| SHEET 3 OF 5

| NAME| DATE| MYTEE 858-679-1191
---|---|---|---
DRAWN| M.LaBarbera| 2/2016| TITLE: Contractors Special
CHECKED| | | SIZE C| DWG.  NO. 2002CS| REV 2.24
COMMENTS:THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF MYTEE LLC. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF MYTEE LLC IS PROHIBITED.| | | SCALE: 1:48| DO NOT
SCALE DRAWING| SHEET 4 OF 5
ITEM NO.| PART NO.| DESCRIPTION| QTY.
---|---|---|---
1| B207| elbow, brass, 90 deg, 1/4″ fpt x 1/4″ fpt| 1
2| AH15| hose, 3/8″, (OAL), f x fs, 5400 gray| 1
3| 6 B103| elbow, 90 deg street, 1/4″mpt x 1/4″ fpt| 1
4| H903A| heater, aluminum cast, single| 2
5| E574| Thermostat, 310°F ± 10°F, Manual, 1/4″| 2
6| E571| heating rod, 600W, 115V| 2
7| E573| Thermostat, 200°, Auto, 1/4″| 2
8| H274| screw, 6 x 3/16, phil pan head, self-tapping| 10

| NAME| DATE| MYTEE 858-679-1191
---|---|---|---
DRAWN| M.LaBarbera| 2/2016| TITLE: Contractors Special
CHECKED| | | SIZE C| DWG.  NO. 2002CS| REV 2.24
COMMENTS:| | | SCALE: 1:48| DO NOT
SCALE DRAWING| SHEET 5 OF 5

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>