sellEton SL-910-3 Remote Display User Manual
- June 1, 2024
- selLEton
Table of Contents
sellEton SL-910-3 Remote Display
USER MANUAL
FEATURES
- Connects to your indicator to display live weight on a larger screen
- Bright LED segment display is readable in high and low light
- 6 digit display
- Painted metal construction with acrylic lens
- For indoor use only
- Two mounting holes located on back
- Connects to most indicators
MOUNTING DIMENSIONS
CONNECTOR
SET-UP EXAMPLE
Here is an example of how to pair your scoreboard to SellEton’s most popular indicators. To set up SL-910 remote display, parameter settings need to be changed on your SL-7510 or SL-7516 indicator to allow communication between the two devices.
SL-7510 PARAMETER SETTINGS
To enter parameter settings, follow the procedure below:
1. Press and hold the HOLD and PRINT key at the same time for 2 seconds
2. Use the arrow keys to change C01 to C18
3. Press the PRINT key to enter/edit the parameter setting
4. Use the arrow keys to change the settings of the below parameters
5. Press the ACCUM key to save and exit parameter settings
SL-7516 PARAMETER SETTINGS
To enter calibration/parameter settings, follow the procedure below:
1. Press and hold the ON/OFF and SET key at the same time for 2 seconds
2. Use the arrow keys to change C01 to C18
3. Press the SET key to enter/edit the parameter setting
4. Use the arrow keys to change the settings of the below parameters
5. Press the ON/OFF key to save and exit parameter settings
| Function | Parameter | Settings/Options |
|---|---|---|
| Communication Setting | C18 | Set the serial interface data output method: |
0 = Turn off serial interface data output
1 = Continuous sending mode, for remote display
2 = Print mode, for ticket printer
3 = Command request mode, connect computer.
4 = PC continuous sending mode, connect computer
Baud Rate| C19| 0=1200 (SL-910 remote display)
1=2400
2=4800
3=9600
For more help, contact us at: 844-735-5386
Remote Display Continuous Sending Mode
Note: Baud Rate must be set to 1200
Output Continuous Format
S T X| S W A| S W B| S W C| X| X| X| X| X| X| X| X| X| X| X| X| C R| C K S
1| 2| 3| 4| 5| 6
State A
Bits0,1,2
0| 1| 2| Decimal point position
1| 0| 0| XXXXXX0
0| 1| 0| XXXXXXX
1| 1| 0| XXXXX.X
0| 0| 1| XXXX.XX
1| 0| 1| XXX.XXX
Bits3,4| Division
0| 1| X1
1| 0| X2
State B
BitsS| function
Bits0| gross=0, net=1
Bits1| Symbol: positive=0, negative=1
Bits2| Overload (or under zero)=1
Bits3| dynamic=1
Bits4| unit: lb=0, kg=1
Bits5| Constant 1
Bits6| Constant 0
State C
Bit2| Bit1| Bit0| unit
0| 0| 0| Kg or lb
0| 0| 1| g
0| 1| 0| t
Bit 3| printing=1
Bit 4| Extend display=1
Bit 5| Constant 1
Bit 6| Constant 0
Specifications
-
Model: SL-910 Remote Display
-
Available Displays: 3, 5, 8
-
Mounting Dimensions:
- SL-910-3: A=21.25, B=7.25, C=12.75, D=1.25
- SL-910-5: A=30.75, B=10.25, C=14.25, D=1.50
- SL-910-8: A=39.00, B=19.75, C=23.35, D=3.25
-
Connector: Black Ground, Red Receive
-
-
FAQ
Q: What should the Baud Rate be set to for the SL-910 remote display?
A: The Baud Rate must be set to 1200 for the SL-910 remote display to function properly.
Q: How can I get more help or support?
A: For further assistance, please contact us at 844-735-5386.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>