SellEton SL-910X Remote Display User Manual

June 1, 2024
selLEton

SellEton logoScales.com
User ManualSellEton SL 910X Remote Display SL-910X Remote Display
USER’S MANUAL
NOV 2023
www.selletonscales.com

FEATURES

  • Connects to your indicator to display live weight on a larger screen
  • Bright LED display is readable in high and low light
  • Display turns green when weight is stable and red when unstable
  • 6 digit display
  • Painted metal construction
  • For indoor or outdoor use
  • Includes two mounting brackets
  • Connects to most indicators
  • Ideal for use with vehicle scales, so drivers can see the weight from inside their vehicle, and proceed once the weight is green/stable
  • Easy to install, connects with RS232 port

MOUNTING DIMENSIONS

SellEton SL 910X Remote Display - MOUNTING DIMENSIONS

CONNECTOR

SellEton SL 910X Remote Display - CONNECTOR

SET-UP EXAMPLE

Here is an example of how to pair your scoreboard to SellEton’s most popular indicators. To set up SL-910X remote display, parameter settings need to be changed on your SL-7510 or SL-7516 indicator to allow communication between the two devices.

SL-7510 PARAMETER SETTINGS
To enter parameter settings, follow the procedure below:

  1. Press and hold the HOLD and PRINT key at the same time for 2 seconds
  2. Use the arrow keys to change C01 to C18
  3. Press the PRINT key to enter/edit the parameter setting
  4. Use the arrow keys to change the settings of the below parameters
  5. Press the ACCUM key to save and exit parameter settings

SL-7516 PARAMETER SETTINGS
To enter calibration/parameter settings, follow the procedure below:

  1. Press and hold the ON/OFF and SET key at the same time for 2 seconds
  2. Use the arrow keys to change C01 to C18
  3. Press the SET key to enter/edit the parameter setting
  4. Use the arrow keys to change the settings of the below parameters
  5. Press the ON/OFF key to save and exit parameter settings
Function Parameter Settings/Options
Communication Setting C18 Set the serial interface data output method:

0 = Turn off serial interface data output
1 = Continuous sending mode, for remote display
2 = Print mode, for ticket printer
3 = Command request mode, connect computer.
4 = PC continuous sending mode, connect computer
Baud Rate| C19| 0=1200
1=2400
2=4800
3=9600 (SL-910X remote display)

For more help, contact us at: 844-735-5386
Remote Display Continuous Sending Mode
Note: Baud Rate must be set to 9600SellEton SL 910X Remote Display -
Remote Display

State A


Bits0,1,2

0| 1| 2| Decimal point position
1| 0| 0| XXXXXX0
0| 1| 0| XXXXXXX
1| 1| 0| XXXXX.X
0| 0| 1| XXXX.XX
1| 0| 1| XXX.XXX

Bits3,4

| Division
0| 1| X1
1| 0| X2

State B


BitsS| function
Bits0| gross=0, net=1
Bits1| Symbol: positive=0, negative=1
Bits2| Overload (or under zero)=1
Bits3| dynamic=1
Bits4| unit: lb=0, kg=1
Bits5| Constant 1
Bits6| Constant 0

State C


Bit2| Bit1| Bit0| unit
0| 0| 0| Kg or lb
0| 0| 1| g
0| 1| 0| t
Bit 3| printing=1
Bit 4| Extend display=1
Bit 5| Constant 1
Bit 6| Constant 0

SellEton logo

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals