BEGA 85 172 Performance Floodlight Instruction Manual

: June 1, 2024
: BEGA

Table of Contents

BEGA 85 172 Performance Floodlight
Product Information
Product Usage Instructions
FAQ
Dimension
Product Description
Cleaning And Maintenance
CONTACT
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BEGA 85 172 Performance Floodlight

Product Information

Specifications

Material: Aluminium alloy
Safety Class: I
Protection Class: IP 65
Impact Strength: IK06
Energy Efficiency Class: E
Power Consumption: 0.07 A
Lamp Module Connected Wattage: 12 W
Luminaire Connected Wattage: 14 W
Colour Temperature: 3000 K
Colour Rendering Index: CRI > 90
Luminaire Luminous Flux: 1265 lm
Luminaire Luminous Efficiency: 90.4 lm / W

Product Usage Instructions

This luminaire requires a separate mains plug for connection to the power source. Various country-specific mains plugs with a 0.5m connecting cable are available as accessories.
Follow national safety regulations for installation and operation. Do not modify the luminaire without proper authorization as it may result in damage or safety hazards.
The luminaire’s electronic components are protected against overvoltage according to DIN EN 61547. For additional protection against transients, consider using separate overvoltage protection components.
Ensure that the total power consumption does not exceed 6 A when configuring your lighting system. The power consumption of the 85 172 model is 0.07 A.

FAQ

Q: What should I do if I need to connect the floodlight to the mains?
A: You will need to order a separate mains plug, available with country-specific options and a 0.5m connecting cable.
Q: How can I protect the electronic components of the luminaire against overvoltage?
A: The luminaire already has overvoltage protection according to DIN EN 61547. For additional protection, consider using separate overvoltage protection components available on the manufacturer’s website.
Q: Is it safe to modify the luminaire?
A: Modifying the luminaire may void the warranty and pose safety risks. Only authorized personnel should make modifications to the product.

Dimension

BEGA-85-172-Performance-Floodlight-fig-1 Instructions for use

Application

Performance floodlight BEGA UniLink® with connection adapter for use in combination with various accessories, e.g. for mounting on trees, pipes or wooden structures.
A separate mains plug must be ordered to connect the floodlight to the mains.
The various country-specific mains plug with 0.5 m connecting cable, as well as extension cables and five-way distribution boxes are available as accessories.

Product Description

Luminaire made of aluminium alloy, aluminium and stainless steel
BEGA Unidure® coating technology
Colour graphite or silver
Clear safety glass
Silicone gasket
Reflector surface is made of pure aluminium
Optical silicone lens · BEGA Hybrid Optics®
Rotation range of floodlight 360°
Swivel range -30°/+70° 5 m mains supply cable
X05RN-F FEP 2 × 1@ + 1G2,5@ with BEGA UniLink® plug-in connector
Complies with flicker requirements by IEEE 1789,
DIN IEC/TR 63158, DIN IEC/TR 61547-1
LED power supply unit 220-240 V 50/60 Hz
BEGA Thermal Control®
Temporary thermal regulation to protect temperature-sensitive components without switching off the luminaire
Safety class I
Protection class IP 65
Dust-tight and protection against water jets
Impact strength IK06
Protection against mechanical impacts < 1 joule
– Conformity mark
Weight: 1.6 kg
This product contains light sources of energy efficiency class(es) E

Safety

The installation and operation of this luminaire are subject to national safety regulations.
The manufacturer accepts no liability for damage caused by improper use or installation.
If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.

Overvoltage protection

The electronic components installed in the luminaire are protected against overvoltage under DIN EN 61547.
To achieve additional protection against e. g. transients, etc. we recommend separate overvoltage protection components.
You can find them on our website at www.bega.com.
The ideal protection of all electronic components installed in the luminaires is achieved by using bounce-free switching contacts such as an electronic relay (solid-state relay), e.g. BEGA 71 320.

Total load

When configuring your lighting system, please ensure that the maximum power consumption of 6 A is not exceeded.
Information on power consumption can be found in the instructions for use and data sheets for all BEGA UniLink® luminaires.
Power consumption of 85 172: 0,07 A

Lamp

Module connected wattage 12 W
Luminaire connected wattage 14 W
Rated temperature ta = 25 °C
Ambient temperature ta max = 50 °C

85 172 K3

Module designation LED-1148/930
Colour temperature 3000 K
Colour rendering index CRI > 90
Module luminous flux 1730 lm
Luminaire luminous flux 1265 lm
Luminaire luminous efficiency 90,4 lm / W

85 172 K4

Module designation LED-1148/940
Colour temperature 4000 K
Colour rendering index CRI > 90
Module luminous flux 1815 lm
Luminaire luminous flux 1327 lm
Luminaire luminous efficiency 94,8 lm / W

Lighting technology

Symmetrical wide beam light distribution Half beam angle 45°
For special lighting applications, the symmetrical light cone can be changed to a flat beam using an additional diffuser lens.

Caution

The BEGA UniLink® plug connectors may only be connected and disconnected in a voltage-free state.

Installation

Unscrew the hexagon socket screws (wrench size 3 mm) on the sides of the connection adapter and screw the corresponding accessory to the floodlight.
Torque = 5 Nm.
Plug the floodlight’s connecting cable into the plug contact of the connecting cable with the country-specific mains plug or into the distribution box or extension cable.
To ensure a sufficiently low protective conductor resistance (loop resistance), the connecting cable of each luminaire in the system must not exceed a length of 50 m from the entry point.
Adjustment of beam direction:
Undo the joint screw (hexagon socket head wrench size 5 mm) and set the desired beam direction.
Tighten the joint screw.
Torque = 7 Nm.

Cleaning And Maintenance

Clean the luminaire regularly with solvent-free cleansers from dirt and deposits.
Do not use high-pressure cleaners.

Maintenance
The connecting cable must be checked for external damage and may only be replaced by a qualified electrician.

Please note

Do not remove the desiccant bag from the luminaire housing.
It is needed to remove residual moisture.

Replacing the LED module

The designation of the LED module is noted on a separate label in the luminaire or on the underside of the specific LED module.
The light colour and light output of BEGA replacement modules correspond to those of the modules originally fitted. The replacement can be carried out by a qualified person using standard tools.
Disconnect the system from the power supply.
Open the floodlight:
Remove the trim ring along with the safety glass and reflector by twisting it anti-clockwise.
Replace the LED module.
Please follow the installation instructions for the LED module.
Inspect and, if necessary, replace the luminaire gaskets.
Defective glass must be replaced.
Place the trim ring with glass and reflector on the floodlight housing so that the notches in the trim ring and luminaire housing sit on top of each other.
Twist on the trim ring clockwise as far as the stop.

Accessories
The following combination options are available for fitting to floodlights with connection adapter

71 223 Screw clamp with connection adapter
71 224 Tube clamp with connection adapter
71 225 Lashing straps with connection adapter
71 226 General fasteners with connection adapter
71 227 G½ mount with connection adapter Shields and diffuser lenses that alter the light distribution are available as accessories for these floodlights.
71 289 Exchangeable lens flat beam
71 331 Shield
71 335 Cylindrical shield Country-specific mains plugs with 0.5 m connecting cable
71 180 Plug type F / E: system common in Germany and Europe
71 181 Plug type G: system used in Great Britain (“Commonwealth plug”)
71 182 Plug type J: system common in Switzerland and Liechtenstein
71 183 Plug type L: system common in Italy and Greece
71 184 Plug type K: system common in Denmark and Greenland BEGA UniLink® extension cables with socket and plug
71 186 BEGA UniLink® Extension cable 5 m
71 187 BEGA UniLink® Extension cable 10 m
71 188 BEGA UniLink® Extension cable 20 m BEGA UniLink® connecting cables with a plug connector and one free cable end to connect to e.g. a conventional connection box
71 247 Connecting cable 5 m with free line ends
71 256 Connecting cable 0.5 m with free line ends BEGA UniLink® distribution box with five connection sockets for the connection of BEGA UniLink® luminaires, extension cables or additional five-way distribution boxes
71 189 BEGA UniLink® Five-way distribution box