CLAS HU 0185BL 25L Waste Oil Drainer User Manual

: June 13, 2024
: CLAS

Table of Contents

INTRODUCTION
HEALTH AND SAFETY INFORMATION
UNPACKING AND CHECKING
USE
MAINTENANCE
DISPOSAL
Read User Manual Online (PDF format)
Download This Manual (PDF format)

CLAS HU 0185BL 25L Waste Oil Drainer User Manual

INTRODUCTION

Field of application
Professional-quality oil changers, suitable for the disposal of used oil from motor vehicles. The oil can be discharged into the drainer by gravity or by pneumatic suction. Sturdy castors make it easy to maneuver in the garage or workshop.

Specifications

tank height : 470mm
tank drain hose 1400mm
suction hose 1400mm
3 flexible probes: Ø8; Ø6; Ø5 / L: 910mm
2 rigid probes: Ø6; Ø8 / L: 700mm
case for probe L 680mm
mano: from 0. 2b to -1b
venturi system
power supply: 6 to 8bar
power supply for tank emptying: 1bar Max- level indicator

Handling and storage However, care must be taken when handling and lifting. Dropping this machine will affect accuracy and may also result in injury. This machine is not a toy and must be treated withrespect.the environment will have a negative effect on its operation if you are not careful. If the air is humid, components will rust. If the machine is not protected from dust and debris, the components will foul: and if it is not cleaned and maintained correctly or regularly, it will not operate at optimum efficiency

HEALTH AND SAFETY INFORMATION

General safety instructions
Warning : Be sure to read and understand these instructions carefully before using this equipment. Be sure to comply with health and safety rules, local regulations and general shop rules when using this equipment.Be sure to familiarize yourself with the process and all the limitations of oil drainers, as well as their potential hazards.

Warning: Make sure oil drainers are disconnected from the air supply before replacing them.

Keep the drainer in good working order.Replace or repair all damaged parts. Use only genuine replacement parts. Keep the work area clean and tidy, and ensure that there is adequate lighting. Keep oil changers clean for efficient and safe performance.
Maintain correct balance and posture when using oil changers.Make sure the floor is not slippery, and wear non-slip shoes in case of oil spillage.

Warning: When extracting high-temperature oils, ensure that your hands, face and body are well protected using appropriate personal protective equipment (PPE).

DO NOT extract caustic or flammable liquids when using oil drainers.
Ensure that children and unauthorized persons are kept away from the work area. Warning : Ensure that the correct air pressure is maintained and does not exceed
Keep the air hose away from heat, oil and sharp edges . Before each use, check the air hose for wear and tear. Make sure all connections are securely fastened.
DO NOT use oil traps for purposes other than those for which they were designed.
DO NOT use oil drainers if any of the bets are damaged or missing, as this may result in failure and/ or injury
DO NOT stand on oil drains.
DO NOT adjust or manipulate safety valves.
DO NOT carry the drainer by the hose or remove the hose from the air supply.
DO NOT place accessories near your face (especially eyes, ears, etc.)
DO NOT allow inexperienced people to use these drainers.
DO NOT use these oil drainers if you are fatigued or under the influence of alcohol, drugs or intoxicating medication.
DO NOT leave the oil drainers operating unattended.
DO NOT direct air from the air hose towards yourself or others.
When not in use, disconnect the oil drainer from the air supply, drain the tank and store it in a safe, dry, childproof place.
Dispose of all used oil in accordance with local regulations

Warning: DO NOT pollute the environment by uncontrolled dumping of used oil.Do not extractflammable liquids. When extracting high-temperature oils, protect your hands and face. Use this equipment only for its intended purpose. Do not modify any component of this equipment. Never fill the tank beyond the maximum level indicated on the dipstick

Reservoir
Vacuum generator
Air inlet
Steel tube for oil extraction
Plastic sleeve
Handle
Oil discharge pipe
Rouex2
3.5mm Dia, oil suction flow approx. 0.8L/min (nylon probes)
4.5mm Dia, oil suction flow approx. 0.8L/min (nylon probes)
6.5mm Dia, oil suction rate approx. 0.8L/min (nylon probes)
4.5mm Dia, oil suction rate approx. 0.8L/min (metal probes)
6.5mm Dia, oil suction rate approx. 0.8L/min (metal probes)
Air connection
Safety valve
1/4′ ball valve 17)1/2′ ball valve

UNPACKING AND CHECKING

Packaging
Carefully remove the unit from its packaging and check that it has not been damaged in transit. Lay out the contents of the unit and check that they correspond to the parts listed below.

Warning! Some of the packaging materials used may be harmful to children, so please do not leave any of these materials within the reach of children. If the packaging is to be disposed of, please ensure that it is disposed of correctly, in accordance with current regulations. The packaging contains several parts and semi-assembled components that require final assembly. Arrange the contents and mark the items in relation to those shown below.

USE

Connect compressed air (8 bar) to the vacuum pump connector a.Once the gauge points to the rad zone on the air pressure gauge b (approx. 2.5-3 minutes), disconnect the unit from the pressurized air.The oil bleeder is now depressurized and ready for use. While the vehicle’s engine is still warm, remove the dipstick and insert the oil probe as far into the engine as possible. Connect suction hose c to the probe. Once the oil has completely drained from the engine, close the suction hose valve

Draining the tank
Caution: Ensure that the ball in the oil sump is securely locked. Connect a 0.5 bar air supply to air inlet 14 and open drain hose valve 17. Once the oil has been transferred from the tank to the waste container, close the drain hose valve: Be sure to clean up any oil leaks immediately. Always wash your hands after draining the oil

MAINTENANCE

Inspect oil traps before use. Ensure that the following items are checked before each use:

Leaks: in the event of leaks, contact a qualified Clas équipements service agent for maintenance and repair. Do not use the oil drainer if leaks are identified.
Flexible hose; ensure that the hose is correctly connected before use.Do not store used oil in the tank for long periods, as this will lead to corrosion of the oil drainer. Wipe the oil drain regularly with a clean cloth or towel. Store the oil drain in a cool, dry place, out of direct sunlight

Warning : Ensure that the operating temperature does not exceed 70°C during operation. If it does,stop the oil drainer immediately and check for faults. If the operating temperature continues to exceed 70°C after the oil drainer has been restarted, contact Clas. Always wear appropriate safety clothing (PPE) when operating the oil drainer

DISPOSAL

At the end of the machine’s service life, or when it can no longer be repaired, ensure that it is disposed of in accordance with national regulations.

Contact your local authorities for information on the collection programs in place in your area.In all circumstances:
Do not dispose of power tools with household waste.
Do not incinerate.
Do not dispose of used oil in the environment.
Do not dispose of used oil in drainage or sewage systems, or in the natural environment.
Dispose of used oil in secure containers at a local recycling site, or use an approved used oil disposal company

DECLARATION DE CONFORMITE CE EC DECLARATION OF CONFIRMITY

Nous, We, CLAS EQUIPEMENTS Z.A. de la Crous 73800 Chignin-France

DECLARE THAT, Under our responsibility, the following products:
WASTE OIL DRAINER Type : 2014/68/: Is manufactured in conformity with the pressure equipment directive 2014/68/EU following
standards: • EN 13445-1: 2021 16.08.2003
Philippe Operations Director
Signature