Polybird P1 Stationary Adirondack Installation Guide
- June 1, 2024
- Polybird
Table of Contents
Polybird P1 Stationary Adirondack
Parts and Hardware
| Part | Description | Quantity |
|---|---|---|
| AA | 2 1/4″ Wafer Bolt | x4 |
| BB | 1 1/4″ Screw | x6 |
| CC | 2 1/2″ Screw | x6 |
| DD | 1/4″ Flange Nut | x4 |
Assembly Instructions
- Attach the seat (B) to legs C and D using four 2 1/4″ wafer bolts (AA) and four 1/4″ flange nuts (DD), as shown. Hand tighten only.
- Attach the seat back (A) to the assembly from step 1 by inserting four 2 1/2″ screws (CC) through the back brace.
- Insert six 1 1/4″ screws (BB) at the armrests to finish attaching the seat back (A) to the assembly from steps 1 and 2.
- Attach the brace (E) to the front legs using two 2 1/2″ screws (BB), as shown.
- Tighten all bolts.
Specifications
| Step | Components | Hardware | Action |
|---|---|---|---|
| 1 | Seat (B), Legs (C, D) | Wafer Bolts (AA), Flange Nuts (DD) | Attach and hand |
tighten
2| Seat Back (A), Assembly from Step 1| Screws (CC)| Insert screws through
back brace
3| Seat Back (A), Arm Rests| Screws (BB)| Attach seat back to assembly
4| Brace (E), Front Legs| Screws (BB)| Attach brace to legs
5| All Assembled Parts| All Used Hardware| Tighten all bolts
Tools Required
- Wrench
- Hex Key
- Screwdriver (not provided)
HARDWARE
Assembly Parts
- A Seat Back
- B Seat
- C Left Leg
- D Right Leg
- E Brace
Note before starting: wait until the whole piece is assembled to tighten the bolts completely.
INSTALLATION INSTRUCTION
- Attach seat (B) to legs C and D using four 2 1/4” wafer bolts (AA) and four 1/4” flange nuts (DD), as shown. Hand tighten only.
- Attach seat back (A) to the assembly from step 1 by inserting four 2 1/2” screws (CC) through the back brace.
- Insert six 1 1/4” screws (BB) at armrests as shown to finish attaching the seat back (A) to the assembly from steps 1 & 2.
- Attach brace (E) to front legs using two 2 1/2” screws (BB), as shown.
We hope you enjoy your new piece of furniture for years to come!
FAQ
What tools do I need that are not provided?
A screwdriver is required for assembly but is not included in the package.
When should I fully tighten the bolts?
Wait until the entire chair is assembled before fully tightening the bolts.
How many steps are involved in the assembly?
There are five main steps in the assembly process.
Can I assemble the chair by myself?
Yes, the instructions are designed for single-person assembly.
What should I do if I have missing hardware?
Contact Polybird customer service for assistance with missing parts.
Final Note
We hope you enjoy your new piece of furniture for years to come!