Polybird P18-R 33 Inch Square Dining Table Installation Guide
- June 1, 2024
- Polybird
Table of Contents
Polybird P18-R 33 Inch Square Dining Table
Product Information
Specifications:
- Product Name: 33 SQUARE TABLE P18-R
- Tools Required (not provided): Hex Key, Screwdriver, Wrench
- Hardware Included:
- AA x8 1/4 x 2 1/4 Wafer Bolt
- BB x8 #8 x 2 1/2 screws
- CC x8 1/4 Flange nut
Product Usage Instructions
Assembly Steps:
Step 1: Attaching Braces to Legs
Attach braces D & E to legs B using two 2 1/2 screws (BB) per leg. Repeat the
same process on the other side using legs C.
Step 2: Attaching Table Top
Attach tabletop A to the table assembly from step 1. Use two 1/4 x 2 1/4 wafer
bolts (AA) at each leg and finish on the inside with eight flange nuts (CC).
Frequently Asked Questions
-
Q: Are the tools required for assembly provided with the product?
A: No, the Hex Key, Screwdriver, and Wrench are not provided with the product. You will need to have these tools available for assembly. -
Q: How many screws are included in the hardware?
A: The hardware includes eight #8 x 2 1/2 screws (BB) for assembly. -
Q: What is the recommended way to tighten the flange nuts during assembly?
A: It is recommended to use a wrench to securely tighten the flange nuts for stability.
33” SQUARE TABLE P18-R
TOOLS
HARDWARE
PARTS
INSTALLATION
- Attach braces D & E to legs B using two 21/2” screws (BB) per leg.
- Repeat step 1 on the other side using legs C.
- Attach tabletop A to table assembly from step 2. Use two 1/4” x 21/4” wafer bolts (AA) at each leg and finish on the inside with eight flange nuts (CC).
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>