Polybird P-7 Easy Rider Chair Instruction Manual
- June 1, 2024
- Polybird
Table of Contents
Polybird P-7 Easy Rider Chair
Specifications
Model | Easy Rider Chair P-7 |
---|---|
Tools Required | Wrench, Hex Key (Screwdriver not provided) |
Final Note
Enjoy your new Polybird chair! We hope you enjoy your new piece of furniture for years to come!
FAQ
- What should I do if I’m missing a part or hardware piece?
- Contact Polybird customer support with your model number and the missing part’s details for assistance.
- Can I use a power tool to assemble the chair?
- It’s recommended to use manual tools to avoid over-tightening and damaging the parts. If using a power tool, set it to a low torque setting.
- How do I maintain the chair?
- Wipe with a damp cloth for cleaning. Do not use harsh chemicals and periodically check for any loose bolts and tighten them if necessary.
TOOLS
HARDWARE
PARTS
Installation Instructions
Note before starting: wait until the whole piece is assembled to tighten the bolts completely.
- Attach leg C to seat B by inserting two 1/4 x 21/4” wafer bolts (AA) through the back leg. Secure from underneath the seat with two 1/4” flange nuts (DD). Then insert one 1/4 x 21/4” wafer bolts (AA) through each front leg and secure with one 1/4” flange nut (DD).
- Repeat step 1 for leg D. Your chair assembly should look like this.
- Attach seat back A to chair assembly from step 2. Using four 21/2” screws (BB), secure seat back to seat B as shown.
- Using three 1” screws (CC) on each side of the chair, attach seat back A to legs C & D on the underside of the arm rests, as shown.
- Enjoy your new Polybird chair!
We hope you enjoy your new piece of furniture for years to come!
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>