SEAJIC MT2AB226 Tripod Selfie Stick User Manual

SEAJIC MT2AB226 Tripod Selfie Stick

Product Information

Specifications

• Model: MT2 AB226
• Type: Tripod Selfie Stick

Product Usage Instructions

Assembly

Follow these steps to assemble the tripod selfie stick:

1. Extend the selfie stick to the desired length.
2. Secure your phone or camera on the mount at the top of the stick.
3. Adjust the angle of your device for the perfect shot.
4. If using as a tripod, extend the legs at the base for stability.

Bluetooth Connectivity

If your selfie stick includes Bluetooth functionality:

1. Turn on the Bluetooth feature on your device.
2. Pair your device with the selfie stick following the provided instructions.
3. Use the remote shutter button on the handle to capture photos wirelessly.

Storage and Maintenance

To ensure longevity of your tripod selfie stick:

• Store it in a cool, dry place when not in use.
• Avoid exposing it to extreme temperatures or moisture.
• Clean the stick with a soft, damp cloth to remove any dirt or debris.

Frequently Asked Questions (FAQ)

• Q: Can I use this selfie stick with both Android and iOS devices?
  

• A: Yes, the tripod selfie stick is compatible with both Android and iOS devices.

• Q: How do I charge the Bluetooth feature of the selfie stick?

• A: The Bluetooth feature of the selfie stick can be charged via a USB cable connected to a power source.

• Q: Can I adjust the angle of my phone or camera when using the tripod feature?
  A: Yes, you can adjust the angle of your device for different shooting perspectives when using it as a tripod.

（MT2)AB226
A tripod selfie stick

Disruptive patented product, automatic bouncing upon landing] User Manual

Connect Bluetooth to mobile phone

1.  Fix the mobile phone onto the holder, press and hold the camera button for 3s until the green lamp flickers, to enter the Bluetooth pairing mode;
2.  Enter Bluetooth settings of mobile phone, to search and connect “SEAJIC MT2” ; the green indicator will be normally on after successful connection;
3.  Press the camera button on the product to take photos; press and hold the camera button for 3s to power off the product and disable Bluetooth nairina mode

Attention: The product will connect the successfully paired mobile phone by default. To connect a new mobile phone, you need to unpair the former mobile phone before pairing a new one.

Product Introduction

Unfold/fold tripod ground; then the tripod of selfie stick will bounce automatically.

While folding the product, hold the middle position of tripod, and push back the pull rod back to the handle sleeve section by section.

Fixing holder of mobile phone

puts and pile it upwards geally to to the modere phone onto the holder. Switch between horizontal and vertical screen
The a role is tewarth a awart el land rell highle rotation. The horizontal and vertical screen can be switched freely without removing the mobile phone.

Charging of remote control

Please recharge the remote control of the holder using USB cable. If the remote control has a low rap, The didicator lap indomaly on in l d during recharging and is off after recharging is finished, The men cong back alien it athe storand adsaren automatically.

Specification & parameters

• Overall dimensions: 3324839mm
• Weight: 420a
• Connection mode:Bluetooth
• Distance of remote control: 10m
• Supported system: Android/IOS
• Matoriale- ARC+ DE/aluminum
• Battery capacity: 50mAh
• Type-C input: 5V/100mA

Important safety information

1.  Please read all safety and operation instructions carefully before using the product. Keep the manual properly for further use;
2.  Please pay attention to all precautions on the product and in the Manual;
3.  Please follow all operation and use instructions;
4.  Use the accessories/attachments designated by the manufacturer only;
5.  The product must be maintained by professionals;
6.  For any damage of the product, such as holder damage, liquid penetration, affection by rainwater or moisture, functioning failure or damage due to falling, please contact the official after-sales service specialist to receive the designated maintenance service.

Name and content of hazardous substances in the product

Name and content of toxic and hazardous substances or elements in the product

This table was prepared according to SJ/T11364

1. It means that the content of the toxic and hazardous substance in all the homogeneous materials of the component is below the limit requirements specified in GB/T 26572. X:
2. It means that the content of the toxic and harmful substance in at least one homogeneous material of the component exceeds the limit requirements specified by GB/T 26572. To protect the environment and human health: 1.
3. Once scrapped, the product should be separated from the household wastes; users have responsibilities for sending the scrapped products to the designated recycling center;
4.  The recycling center should recycle the product’s useful materials properly; 3. For details of scrapping the product, please consult the local government, waste disposal center or dealer;
   The product’s environmentally friendly service life, which is 10 years, is determined by the enterprise according to its design characteristics. The product’s environmentally friendly service life is effective only when the product is used under the normal conditions mentioned in the Manual.

Attention

• To avoid damaging the product, please
• Do not expose the product to rain or a wet environment;
• Do not put open flames (such as lighted candle) on or near the product;
• Do not place the product near heat sources, such as oven, cooler, stove or other heating devices;
• Do not expose the product to boiled water;
• Do not put the product in articles containing liquids, such as vase;
• Do not place the product in hot places; Do not pull the product by force;
• Do not open the product’s back cover by force, or repair its internal parts without permission to avoid electric shock or damage.

After-sales services of SEAJIC

We provide three-warranty services for all products which are sold through the official channel or authorized channel of SEAJIC in strict accordance with the Law of the People’s Republic of China on Protection of Consumer Rights and Interests. For regions where special three-warranty regulations are executed, SEAJIC hereby undertakes to abide by the local regulations. Please keep the warranty card and effective purchase voucher properly in order to safequard your legal rights.

Warranty Card of SEAJIC

User Information
Name: Contact phone:
Date of purchase: Purchase platform and shop name:
Order No.:
Product information:
Model:

• OSM (China) owns the right of interpretation of pictures and texts in the Manual,

FCC Warning Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>