PS-5094 PASCObot Spares Kit User Guide
- June 4, 2024
- PASCO
Table of Contents
PS-5094 PASCObot Spares Kit
What’s included
- 2× Hub Use the hub for attaching the PASCObot Wheels to a motor. Attach the hub to the spline of the High Speed Stepper Motor (PS-2976), Low Speed Stepper Motor (PS-2978), or any standard servo motor.
- 2× Screw, 4-40×1/4″ Use these screws for securing the hub to the spline of a stepper or servo motor.
- 8× Screw, 6-32×3/8″ Use these screws for securing the PASCObot Wheels (PS-3319) to the hub.
- 20× Screw, 4-40×7/15″ Use these screws for securing accessories to the PASCObot threaded holes.
- 2× Thumbscrew Use the thumbscrew to secure the PASCObot top frame to the hold-down.
Technical Support
Need more help? Our knowledgeable and friendly Technical Support staff is
ready to provide assistance with this or any other PASCO product.
Phone (USA) 1-800-772-8700 (Option 4)
Phone (International) +1 916 462 8384
Online pasco.com/support
Warranty, Copyright, and Trademarks
Limited Warranty
For a description of the product warranty, see the Warranty and Returns page
at www.pasco.com/legal.
Copyright
This document is copyrighted with all rights reserved. Permission is granted
to non-profit educational institutions for reproduction of any part of this
manual, providing the reproductions are used only in their laboratories and
classrooms, and are not sold for profit. Reproduction under any other
circumstances, without the written consent of PASCO scientific, is prohibited.
Trademarks
PASCO and PASCO scientific are trademarks or registered trademarks of PASCO
scientific, in the United States and/or in other countries. All other brands,
products, or service names are or may be trademarks or service marks of, and
are used to identify, products or services of, their respective owners. For
more information visit www.pasco.com/legal.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>