Polybird P17-C 33 Inch Round Dining Table Installation Guide
- June 1, 2024
- Polybird
Table of Contents
Polybird P17-C 33 Inch Round Dining Table
Product Information
Specifications:
- Model: P17-C
- Table Shape: Round
- Tools Required: Hex Key, Screwdriver, Wrench (not provided)
- Hardware Included:
- AA x8 1/4 x 2 1/4 Wafer Bolt
- BB x16 #8 x 2 1/2 screws
- CC x8 1/4 Flange nut
Product Usage Instructions
Assembly Steps:
- Step 1: Attach cross pieces D & E to legs B using two 2 1/2 screws(BB) per cross piece.
- Step 2: Repeat step 1 for cross pieces F & G.
- Step 3: Repeat steps 1 and 2 on the other side.
- Step 4: Insert cross pieces D, E, F & G in pockets on leg C and attach with two 2 1/2 screws (BB) per cross piece.
- Step 5: Attach table top A to the table assembly from step 3. Use two 1/4 x 2 1/4 wafer bolts (AA) at each leg and finish with eight flange nuts (CC).
Frequently Asked Questions (FAQ):
-
Q: Are the tools required for assembly included in the package?
A: The Hex Key, Screwdriver, and Wrench are not provided with the product. Please make sure to have these tools ready for assembly. -
Q: How many screws are needed for attaching the cross pieces?
A: You will need two #8 x 2 1/2 screws (BB) per cross piece for attaching them to the legs.
33” ROUND TABLE P17-C
TOOLS
HARDWARE
PARTS
INSTALLATION
- Attach cross pieces D & E to legs B using two 2 1/2” screws (BB) per cross piece.
- Repeat step 1 for cross pieces F & G.
- Insert cross pieces D, E, F & G in pockets on leg C and attach with two 2 1/2” screws (BB) per cross piece.
- Attach table top A to table assembly from step 3. Use two 1/4” x 21/4” wafer bolts (AA) at each leg and finish with eight flange nuts (CC).
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>