Polybird P53 Round End Table Installation Guide
- June 1, 2024
- Polybird
Table of Contents
Polybird P53 Round End Table
Specifications
| Product | Round End Table |
|---|---|
| Model | P53 |
| Tools Required | Screwdriver (not provided) |
| Hardware Included | #8 x 2 1/2″ screws (Quantity: 8) |
TOOLS
HARDWARE
Parts Overview
- Part A – Table Legs (2 pieces)
- Part B – Table Legs with Crossbrace (2 pieces)
- Part C – Tabletop (1 piece)
Assembly Instructions
Note before starting: Wait until the whole piece is assembled to tighten the screws completely.
- Attaching the Legs: Slide legs of part B into notches on the bottom of tabletop part C using two #8 x 2 1/2″ screws (AA) per leg.
- Completing the Frame: Repeat step 1 for part A, fitting into notches in the tabletop and in the crossbrace on part B.
FAQ
What tools do I need to assemble the table?
You will need a screwdriver, which is not provided with the hardware.
Should I fully tighten the screws as I attach each part?
No, you should wait until the entire piece is assembled before fully tightening the screws to ensure proper alignment and stability.
How many screws are used for each leg?
Each leg is attached using two #8 x 2 1/2
Read User Manual Online (PDF format)
Loading......