Polybird P18-C 33 Inch Square Dining Table Installation Guide
- June 1, 2024
- Polybird
Table of Contents
Polybird P18-C 33 Inch Square Dining Table
Product Information
Specifications
- Product Name: 33 Square Table P18-C
- Tools Required (not provided): Hex Key, Screwdriver, Wrench
- Hardware Included:
- 8 x 1/4 x 2 1/4 Wafer Bolt (AA)
- 16 x #8 x 2 1/2 screws (BB)
- 8 x 1/4 Flange nut (CC)
Product Usage Instructions
Assembly Steps:
- Attach cross pieces D & E to legs B using two 2 1/2 screws (BB) per cross piece.
- Repeat step 1 for cross pieces F & G.
- Repeat steps 1 and 2 on the other side.
- Insert cross pieces D, E, F & G in pockets on leg C and attach with two 2 1/2 screws (BB) per cross piece.
- Attach table top A to the table assembly from step 4. Use two 1/4 x 2 1/4 wafer bolts (AA) at each leg and finish with eight flange nuts (CC).
FAQ
Q: Are the tools required included in the package?
A: No, the Hex Key, Screwdriver, and Wrench are not provided with the product. Please ensure you have these tools available before starting the assembly process.
Q: How long does it typically take to assemble the 33 Square Table?
A: The assembly time can vary depending on your experience with similar products, but on average, it may take approximately 1-2 hours to complete the assembly of the table.
TOOLS
HARDWARE
PARTS
INSTALLATION
- Attach cross pieces D & E to legs B using two 2 1/2” screws (BB) per cross piece.
-
Repeat step 1 for cross pieces F & G.
-
Insert cross pieces D, E, F & G in pockets on leg C and attach with two 2 1/2” screws (BB) per cross piece.
- Attach table top A to table assembly from step 3. Use two 1/4” x 21/4” wafer bolts (AA) at each leg and finish with eight flange nuts (CC).
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>