Polybird P4 Balcony Chair Installation Guide
- June 1, 2024
- Polybird
Table of Contents
Polybird P4 Balcony Chair
TOOLS
HARDWARE
PARTS
Installation Instructions
Note before starting: wait until the whole piece is assembled to tighten the bolts completely.
- Attach legs (D & E) to footrest (C). Starting with D from the outside, insert two 1/4” x 2” wafer bolts (DD). Fasten two 1/4” flange nuts (EE) to the end of the bolts on the inside. Repeat for leg E.
- Attach seat (B) to assembly from step 1. Using six 2 1/4” wafer bolts (AA) and working from the outside in, attach B with four bolts on the seat back and two on the seat front. Finish bolts with six 1/4” flange nuts (EE).
- Align chair back (A) with chair assembly from step 2. Attach at the back of the seat using four 2 1/2” screws (CC). Attach under the arm rests using six 1” screws (BB).
FAQ
- What do I do if I’m missing a part or hardware?
- Contact the manufacturer for replacement parts.
- Can I use a power drill for assembly?
- Yes, but be careful not to over-tighten and strip the screws.
- Should I tighten the bolts as I go?
- No, wait until the entire piece is assembled before fully tightening the bolts.
We hope you enjoy your new piece of furniture for years to come!
Read User Manual Online (PDF format)
Loading......