Polybird P11-C Dining Captain Chair Instruction Manual
- June 1, 2024
- Polybird
Table of Contents
Polybird P11-C Dining Captain Chair
Specifications
| Section | Details |
|---|---|
| Tools Required | Hex Key, Screwdriver (not provided) |
| Hardware Included | Wafer Bolts (AA, BB, DD), Screws (CC) |
| Assembly Steps | 3 Steps |
FAQ
Q: What tools do I need to assemble the Captain Chair P11-C?
A: You will need a Hex Key and a Screwdriver (not provided).
Q: Should I tighten the bolts as I go?
A: No, wait until the whole piece is assembled to tighten the bolts completely.
Q: How many steps are there in the assembly process?
A: There are three main steps in the assembly process.
Q: Are all the necessary bolts and screws provided?
A: Yes, all the necessary hardware is included except for the screwdriver.
TOOLS
HARDWARE
PARTS
Installation Instructions
Note before starting: wait until the whole piece is assembled to tighten the bolts completely.
- Attach brace C to front leg E using one 1/4” x 1 1/2” wafer bolt (AA) as shown. Repeat for leg D.
- Working from the inside out, attach seat base B to front legs D & E using two 1/4” x 1” wafer bolts (BB) on each side, as shown.
- Attach seat back A to chair assembly from step 2. Using two 1/4” x 11/2” wafer bolts (AA) on each side, secure seat back A to seat B, as shown. Then using one 1/4” x 11/2” wafer bolts (AA) on each side, secure seat back A to brace C, as shown.
- Attach armrest G using one 1/4” x 2” wafer bolt (DD) where G meets seat back A and two 2 1/2” screws (CC) underneath seat B, as shown. Repeat for armrest F.
Read User Manual Online (PDF format)
Loading......