Polybird P14-R 64 Dining Bench Table Instruction Manual
- June 1, 2024
- Polybird
Table of Contents
Polybird P14-R 64 Dining Bench Table
Tools Required
- Hex Key
- Screwdriver (not provided)
Parts Included
Hardware Included
Code | Quantity | Description |
---|---|---|
AA | x8 | 1/4″ x 1 3/4″ Wafer Bolt |
BB | x4 | #8 x 2 1/2″ screws |
CC | x8 | 1/4″ Flange Nut |
Note before starting: wait until the whole piece is assembled to tighten the bolts completely
Assembly Instructions
Note before starting: Wait until the whole piece is assembled to tighten
the bolts completely.
INSTALLATION
Step 1; Lay bench seat A upside down on the ground. Attach legs B & C using two 1/4″ x 1 3/4″ wafer bolts (AA) per leg (8 total). Finish each bolt with a 1/4″ flange nut (CC). Step 2: Fit brace D into grooves in legs B & C and secure with four 2 1/2″ screws (BB), as shown.
Specifications
Model | P14-R |
---|---|
Type | Bench |
Brand | Polybird |
FAQ
Q: What tools will I need to assemble the bench?
A: You will need a hex key and a screwdriver, which is not provided.
Q: Should I fully tighten the bolts as I assemble?
A: No, wait until the whole piece is assembled before fully tightening the bolts.
Q: How many flange nuts are used in the assembly?
A: Eight flange nuts (CC) are used, one for each wafer bolt (AA).
Q: Where do I fit the brace D in the bench assembly?
A: Brace D fits into grooves in legs B & C and is secured with screws (BB).
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>