Polybird P11-R Dining Captain Chair Installation Guide
- June 1, 2024
- Polybird
Table of Contents
Polybird P11-R Dining Captain Chair
Product Information
Specifications
- Product Name: Captain Chair
- Hardware Included: Hex Key Screwdriver, AA, CC, 1/4 x 1 Wafer Bolt, #8 x 2 1/2 screws, 1/4 x 1 1/2 Wafer Bolt, 1/4 x 2 Wafer Bolt
- Number of Parts: Multiple parts for assembly
Product Usage Instructions
Assembly Steps:
- Attach front legs C & D to seat B using two 1/4 x 1 wafer bolts (AA) per leg.
- Attach seat back A to chair assembly from step 1. Secure with four 1/4 x 1 1/2 wafer bolts (BB).
- Attach crossbraces E & F by fitting in notches in legs C & D. Use four 1/4 x 1 1/2 wafer bolts (BB) to secure crossbraces.
- Attach arm rests G and H using specified bolts and screws as indicated in the manual.
- Attach brace I to back legs using the provided screws on each side.
Important Note:
Before starting assembly, wait until the whole piece is assembled to
tighten the bolts completely.
FAQ
-
Q: What should I do if I encounter missing hardware?
A: If any hardware is missing, please contact our customer support for assistance in obtaining the necessary parts for assembly. -
Q: Can the chair be disassembled for storage or transportation?
A: Yes, the chair can be disassembled by following the assembly steps in reverse order. Make sure to keep all hardware safely for future reassembly.
CAPTAIN CHAIR P11-R
TOOLS
HARDWARE
PARTS
Assembly
Note before starting: wait until the whole piece is assembled to tighten the bolts completely
- Attach front legs C & D to seat B using two 1/4” x 1” wafer bolts (AA) per leg, as shown.
- Attach seat back A to chair assembly from step 1. Using four 1/4” x 11/2” wafer bolts (BB), secure seat back A to seat B, as shown.
- Attach crossbraces E & F by fitting in notches in legs C & D. Use four 1/4” x 11/2” wafer bolts (BB) to secure crossbraces.
- Attach arm rests G using one 1/4” x 2” wafer bolt (DD) where G meets seat back A and two 2 1/2” screws (CC) underneath seat B, as shown. Repeat for arm rest H.
- Attach brace I to back legs using two 2 1/2” screws (CC) on each side.
Read User Manual Online (PDF format)
Loading......